You create NSG10 and NSG11 to meet the network security requirements

HOTSPOT

You create NSG10 and NSG11 to meet the network security requirements.

For each of the following statements, select Yes it the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

View Answer

Answer:

Explanation:

From VM1, you can establish a Remote Desktop session with VM2:

If NSG10 is associated with Subnet1 where VM1 is located, and there is a rule that allows outbound RDP traffic (typically TCP port 3389), then VM1 should be able to initiate an RDP session with VM2. Without a specific rule blocking RDP, the answer would typically be Yes.

From VM2, you can ping VM1:

ICMP traffic (which is used by the ping command) is usually blocked by default on NSGs unless a specific rule is created to allow it. If the firewall on the VMs allows ICMP traffic, but there is no NSG rule permitting ICMP, then VM2 would not be able to ping VM1. Unless NSG11 explicitly allows ICMP traffic outbound from VM2, the answer would be No.

From VM2, you can establish a Remote Desktop session with VM1:

This would depend on whether NSG11 allows outbound RDP traffic and NSG10 allows inbound RDP traffic. If NSG10 and NSG11 are configured with the custom rules you provided, which we don’t have the specifics of, and assuming that the NSG11 does not have a rule that blocks outbound RDP traffic and NSG10 allows inbound RDP, then the answer would be Yes.