VMware 3V0-21.23 VMware vSphere 8.x Advanced Design Online Training
VMware 3V0-21.23 Online Training
The questions for 3V0-21.23 were last updated at Nov 23,2024.
- Exam Code: 3V0-21.23
- Exam Name: VMware vSphere 8.x Advanced Design
- Certification Provider: VMware
- Latest update: Nov 23,2024
An architect is designing a solution based on the following information:
– Each ESXi host has a single physical NIC with two 10 Gbps ports.
– There is a performance-based service-level agreement (SLA) that guarantees 15 Gbps bandwidth for production virtual machines at all times.
– There is no budget to purchase additional hardware.
– The hardware replacement SLA is based on a delivery agreement of two business days.
Which recommendation for the configuration of vSphere High Availability (HA) should the architect include in the design?
- A . Configure vSphere HA Configure % based admission control Configure two isolation addresses Consider an OEM with NIC failure conditions in their Proactive HA plugin
- B . Configure vSphere HA Set das.IgnoreRedundantNetWarning to true Consider an OEM with NIC failure conditions in their Proactive HA plugin
- C . Configure vSphere HA Configure two existing data stores for heartbeat Consider an OEM with NIC failure conditions in their Proactive HA plugin
- D . Configure Proactive HA Automation Level: Automated Remediation: Maintenance mode for all failures Consider an OEM with NIC failure conditions in their Proactive HA plugin
How do you determine storage topology needs for a vSphere design?
- A . By calculating the network bandwidth needed for data transfer between vSphere hosts.
- B . By identifying the number of virtual machines that will use the storage resources.
- C . By specifying the amount of storage capacity required for the vSphere environment.
- D . By evaluating the storage architecture options such as SAN, local storage, or Hyper-Converged Infrastructure (HCI).
An architect is designing a new vSphere environment to meet the following requirements:
– The environment must support 800 virtual machines.
– The environment will be built initially using 200 hosts.
Which vCenter Server appliance deployment size should the architect specify for the design?
- A . Large
- B . Small
- C . X-Large
- D . Medium
What is the purpose of creating a vCenter Server logical design?
- A . To determine the hardware and infrastructure requirements for vCenter Server.
- B . To ensure the design meets the required industry regulations and standards.
- C . To identify the specific tasks and operations vCenter Server should perform.
- D . To provide an abstract representation of vCenter Server’s structure and components.
What is the minimum number of ESXi hosts required to create a vSphere vSAN cluster?
- A . 1
- B . 2
- C . 3
- D . 4
An architect is designing the expansion of an existing vSphere 7 environment. The customer is requesting a design for a new cluster to support the anticipated future business growth. The requirements specified for the existing environment design must be considered when designing the new cluster.
The existing design has the following requirements:
– REQ01 The environment has an availability target of 99.5% for all infrastructure.
– REQ02 The recovery time objective (RTO) for Tier 1 virtual machines is one hour.
– REQ03 Windows and Linux virtual machines must reside on separate clusters.
– REQ04 Access to the management cluster within the environment must be controlled.
Which of the listed requirements would be classified as a functional requirement?
- A . The environment has an availability target of 99.5% for all infrastructure
- B . The recovery time objective (RTO) for Tier 1 virtual machines is one hour
- C . Access to the management cluster within the environment must be controlled
- D . Windows and Linux virtual machines must reside on separate clusters
Refer to the exhibit. During a requirements gathering workshop, the architect shares the following diagram:
What should the architect recommend for guaranteed throughput for each service?
- A . – Use explicit failover order with pNIC0 as Active for ESXi Management and VM Network
– Use explicit failover order with pNIC1 as Active for backup network
– Use explicit failover order with pNIC2 as Active for vMotion
– Use explicit failover order with pNIC3 as Active for replication - B . – Use the Route Based on IP Hash for ESXi management and VM network
– Use the Route Based on IP Hash for backup network
– Use the Route Based on the Originating Virtual Port for vMotion
– Use failover with pNIC3 as Active for replication. - C . – Create a link aggregation group (LAG) for vDS_01
– Use the Route Based on Physical NIC Load for vMotion
– Use the Route Based on Physical NIC Load for replication - D . – Use the Route Based on IP Hash for ESXi management and VM network
– Use failover with pNIC1 as Active for backup network
– Create a link aggregation group (LAG) for vDS_02
Which requirement is essential to ensure that the system can handle its intended workload without performance degradation?
- A . Performance requirements
- B . SLA requirements
- C . Capacity requirements
- D . Compute requirements
How is the physical and storage connectivity topology determined in a vSphere environment?
- A . By specifying the expected levels of system performance and responsiveness.
- B . By identifying the type of data traffic and communication requirements in the environment.
- C . By evaluating the storage architecture options such as SAN, local storage, or HCI.
- D . By considering the physical connections and pathways between storage devices and vSphere hosts.
An architect is designing a new vSphere environment to meet the following requirements:
– REQ01 The platform must provide a minimum of N+1 redundancy.
– REQ02 The recovery point objective (RPO) for all virtual machines within the environment is one hour.
– REQ03 The production environment must be deployed into the primary data center.
– REQ04 The design must adhere to the company security standards, which include Payment Card Industry (PCI) Data Security Standard compliance.
– REQ05 The platform must be capable of running 1,000 virtual machines across both data centers concurrently.
Which two of the listed requirements would be classified as functional requirements? (Choose two.)
- A . The platform must provide a minimum of N+1 redundancy.
- B . The recovery point objective (RPO) for all virtual machines within the environment is one hour.
- C . The production environment must be deployed into the primary data center.
- D . The design must adhere to the company security standards, which include Payment Card Industry (PCI) Data Security Standard compliance.
- E . The platform must be capable of running 1,000 virtual machines across both data centers concurrently.
Latest 3V0-21.23 Dumps Valid Version with 185 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
