What are three actions that are managed in the Policies section of vRealize Operations? (Choose three.)
- A . Modify the CPU demand value in a custom profile
- B . Modify the level above which the Faults badge will be read
- C . Determine which resources are included in workload calculations
- D . Set the virtual CPU to physical CPU overcommit ratio to use in capacity calculations
- E . Enable the calculation of capacity metrics and badges
Which out of the box Profile VM size can be used in a capacity project? (Choose the best answer.)
- A . Small
- B . Medium
- C . Average
- D . Large
What are the possible roles that can be assigned when deploying a vRealize Operations appliance? (Choose the best answer.)
- A . Master, Master Replica, Data, Remote Collector
- B . Master, Analytics, Remote Collector, Child
- C . Master, Backup, Analytics, Remote Collector
- D . Parent, Child, Remote Collector
A
Explanation:
Reference http://pubs.vmware.com/vrealizeoperationsmanager-6/topic/com.vmware.ICbase/PDF/vrealizeoperations-manager-60-vapp-deploy-guide.pdf (p.10)
View the exhibit.
As shown in the exhibit, with a wait Cycle of 2 and a Cancel Cycle of 1, when will the alert be triggered by default?
- A . 10 minutes
- B . 5 minutes
- C . 2 minutes
- D . 1 minute
A
Explanation:
Reference https://virtualg.uk/ive-installed-vrealize-operations-vrops-now-what/
There are a few alerts in the Alerts Screen for host connectivity. These are currently being addressed by the networking team.
How would a user clear these alerts temporarily from the active list without cancelling them? (Choose the best answer.)
- A . Take ownership of the alert
- B . Assign the alert to the networking team
- C . Release ownership of the alert
- D . Suspend the alert
D
Explanation:
Reference https://docs.vmware.com/en/vRealize-Operations-Manager/6.6/com.vmware.vcom.core.doc/
GUID-FC6994C0-F6EF-40F4-99DC-7E119A2B338D.html
To configure the VMware vSphere management pack, a connection to a vCenter server must be made.
What are the minimum privileges for the collection user? (Choose the best answer.)
- A . Read only with elevated privileges to datastores
- B . Administrative
- C . Read only
- D . Virtual machine power user
C
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-19DAD6AF-7262-4655-B69F-6C665E33B52F.html
View the Exhibit.
Based on the exhibit, which of the below is true about the visibility of this dashboard? (Choose the best answer.)
- A . This dashboard will be visible to vRealize Operations administrators
- B . This dashboard will be visible to the user groups to which it has been shared
- C . This dashboard will NOT be visible to any user
- D . This dashboard will be visible to any user allowed to see NSX objects
C
Explanation:
Reference https://communities.vmware.com/thread/505687
A user is attempting to troubleshoot a cluster the predefined dashboards.
Which dashboard provides information about the virtual machines that generated the highest IOPS and network throughput during the last week for a given cluster? (Choose the best answer.)
- A . VM Usage dashboard
- B . VM Configuration dashboard
- C . Heavy Hitter VMs dashboard
- D . Troubleshoot a VM dashboard
C
Explanation:
Reference https://docs.vmware.com/en/vRealize-Operations-Manager/6.4/com.vmware.vcom.core.doc/ GUID-76324E51-606A-4D13-A84D-0517F34823AA.html
Once a super metric is created, what is required in order for it to be calculated and available for use? (Choose the best answer.)
- A . Ensure the Enable check box in the super metric creation pop-up window is selected
- B . Assign it to one or more object types, then enable it in one or more policies
- C . Assign it to one or more user groups so that members can use it
- D . Add it to one or more custom groups and/or application definitions
B
Explanation:
Reference https://blogs.vmware.com/management/2017/04/creating-percentage-super-metric-vrealizeoperations.html
Which is the name of the file that can be created to contain property values for agents to use during deployment? (Choose the best answer.)
- A . epops.cfg
- B . agent.properties
- C . configure.info
- D . agent.conf
B
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-61/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-AA118E41-CC52-4C29-A5BB-96EE5E0E462F.html
Endpoint Operations agent installs require a vROps account with which permission? (Choose the best answer.)
- A . Manage Agents
- B . Content Creation
- C . Endpoint Management
- D . Interactive Logon
A
Explanation:
Reference https://kb.vmware.com/s/article/2135051
Which three authentication sources can be configured within vRealize Operations? (Choose three.)
- A . RADIUS
- B . Active Directory
- C . Horizon View Secure Gateway
- D . SSO SAML
- E . Local
An administrator needs to create a new report. He would like to use an existing report as a reference and make a few changes to save time.
Which method would the administrator use? (Choose the best answer.)
- A . Create a new, blank report and select the option to copy all the objects from an existing report
- B . Open the existing report and write down a description of all the objects within, then create a blank report and add objects in one at a time based on the notes
- C . Copy the report to his clipboard and paste that object into a new, blank report
- D . Use the Clone Template function to clone the existing report where he can make changes that will be saved as a new report
When a management pack is added to vRealize Operations, does the inventory tree reflect the addition of the management pack? (Choose the best answer.)
- A . Yes, if the inventory tree is updated manually
- B . Yes; the inventory tree is updated automatically
- C . No; the inventory tree is a static, hard-coded entity
- D . The inventory tree can only be updated through professional services
By default, which size configurations are offered by VMware during the installation of vRealize Operations? (Choose the best answer.)
- A . Extra Small, Small, Medium, and Large
- B . Small, Medium, Large, and Extra Large
- C . Extra Small, Small, Medium, Large, and Extra Large
- D . Small, Medium, and Large
C
Explanation:
Reference https://kb.vmware.com/s/article/2148829
In vRealize Operations (vROps), what are three reasons for using custom data centers (CDC)? (Choose three.)
- A . Forecast and analyze capacity needs for the objects it contains
- B . Group objects across different vROps instances
- C . Provide capacity analytics and capacity badge computations for the objects it contains
- D . Group data centers, clusters, hosts, virtual machines and datastore objects that span multiple vCenter server instances
ACD
Explanation:
Reference https://docs.vmware.com/en/vRealize-Operations-Manager/6.5/com.vmware.vcom.core.doc/ GUID-B8A67BF8-B283-4B47-8F04-D3ECB1A04723.html
Which report should be used to help mitigate risk and efficiency issues? (Choose the best answer.)
- A . Cluster Capacity Report
- B . VMware Tools Status Summary Report
- C . Oversized Virtual Machines Report
- D . VM Configuration Summary List View Report
Which process can help reduce resource over-allocation in the environment? (Choose the best answer.)
- A . Investigating and acting upon the ‘Virtual Machine quest file systems are running out of disk space’ alerts
- B . Investigating and acting upon the vSphere Hardening alerts
- C . Running the Network Traffic by VM report and taking action based on this data
- D . Running the Oversized VM report and taking action based on this data
Which badge combines metrics that show the demand for resources on an object? (Choose the best answer.)
- A . Faults
- B . Stress
- C . Workload
- D . Anomalies
C
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-7B4E79CB-8440-43F3-82AC-B9767E56852E.html
Which statement is true about Endpoint Operations plugins? (Choose the best answer.)
- A . They are built by the community and are not supported by VMware
- B . They are available at no additional cost for customers who have purchased vRealize Operations Enterprise
- C . They are pre-installed in vRealize Operations
- D . They are available as Flings
B
Explanation:
Reference: https://www.vmware.com/products/vrealize-operations.html#compare
Which two networking requirements are true about the node types in a vRealized Operations (vROps) cluster? (Choose two.)
- A . Analytics cluster nodes must be on separate VLANs as long as they are in the same cluster
- B . All node types including remote collectors must be bi-directionally routable by IP address or FQDN
- C . All vROps cluster node types must be configured with dynamic IP addresses
- D . An underscore must NOT be included in the hostname of any cluster node
BD
Explanation:
Reference https://docs.vmware.com/en/vRealize-Operations-Manager/6.5/vrealize-operations-manager65-linux-install-guide.pdf (p.20)
How can all available views be accessed in vRealize Operations? (Choose the best answer.)
- A . From the Reports tab under Content
- B . From the Home tab under Views
- C . From the Administration tab under Global Settings
- D . From the Content tab under Views
D
Explanation:
Reference https://kb.vmware.com/s/article/2132786
Which two badges are Risk sub-badges? (Choose two.)
- A . The Fault badge
- B . The Capacity Remaining badge
- C . The Anomaly badge
- D . The stress badge
- E . The Workload badge
BD
Explanation:
Reference http://vmwaredevotee.com/2012/11/27/badges-in-vcenter-operations-manager/
View the Exhibit. The VM chg-web-01a is a member of several Custom Groups including the “Production VMs” Custom Group. The “Production VMs” Custom Group is associated with the “No CPU and memory overcommit” Policy.
As shown in the Exhibit, what is the effective policy for this VM? (Choose the best answer.)
- A . There is no policy associated with the chg-web-01a VM
- B . The VMware Policy for Interactive workloads policy
- C . The No CPU and memory overcommit policy
- D . The Default policy
What purpose do Access Control Roles serve in vRealize Operations (vROps)? (Choose the best answer.)
- A . Roles allow administrators to install and configure the vROps OVA
- B . Roles include predefined user types such as applications, storage, networking, and virtual infrastructure administrators
- C . Roles determine the features a user can access and the actions they can perform
- D . Roles are a legacy requirement for vCenter authentication and security
C
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-625E2C7C-3262-405B-8FF5-AA21101CF780.html
Which process can help reduce resource over-allocation in the environment? (Choose the best answer.)
- A . Investigating the high CPU leading to Stress alerts
- B . Viewing the Compliance sub-badge
- C . Running the Virtual Machine Inventory Summary report
- D . Investigating the Reclaimable Capacity page on the Cluster objects
As of vRealize Operations (vROps) version 6.1, remote collectors can be configured into collector groups.
Why is this significant? (Choose the best answer.)
- A . If the collecting node fails, another node in the collecting group can take over and resume collection
- B . The more nodes in a collection group, the more collected metric data can be buffered and stored in the case of a network outage
- C . Configuring a collector group, the nodes can be configured in an active-active mode which will allow for faster and increased capacity collections
- D . Remote collectors of different vROps versions can be run in a collector group
Which Action is supported for automation? (Choose the best answer.)
- A . Rebalance Container
- B . Power Off VM
- C . Print Report
- D . Delete Snapshots
B
Explanation:
Reference https://blogs.vmware.com/management/2016/07/david-davis-on-vrealize-operations-post-27automated-remediation-in-vrops-6-x.html
View the exhibit.
In the Policy Library tree shown, a change to which two policies could have an impact on the Production MySQL policy? (Choose two.)
- A . The Default Policy
- B . The A Production Policy
- C . The Production PostgreSQL policy
- D . The Base Settings policy
- E . The Production MySQL policy
BD
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-3A0B0010-0584-4D02-89F1-A91CC2850362.html
Which three methods can be used to create user groups in vRealize Operations? (Choose three.)
- A . The import user groups dialog in Access Control
- B . The import user groups dialog in Authentication Sources
- C . Add groups dialog in Access Control
- D . The vRealize Operations product API
- E . The import user groups from vSphere dialog
ABC
Explanation:
Reference: http://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-819EDE51-D292-4F32-A057-E58155B33EFF.html
Endpoint Operations agent plug-ins for application monitoring (such as MS SQL, IIS, Apache) are included with which vRealize Operations licensing? (Choose the best answer.)
- A . vRealize Operations Enterprise
- B . vRealize Operations Standard
- C . vSphere with Operations Manager
- D . vRealize Operations Advanced
C
Explanation:
Reference http://vxpresss.blogspot.com/2017/03/using-end-point-operations-agent-with.html
What is the length of the sliding window used to calculate recommended capacity? (Choose the best answer.)
- A . 60 days
- B . 90 days
- C . 120 days
- D . 30 days
Endpoint Operations provides the native ability to monitor supported operating systems and applications within vRealize Operations.
What are additional capabilities of Endpoint Operations? (Choose the best answer.)
- A . Script monitors, hardware monitors and anti-virus
- B . Process monitors, script monitors and patch monitors
- C . Security monitors, hardware monitors and patch monitors
- D . Remote monitors, process monitors and script monitors
After running the Rebalance Container action, where can a user view the status and verify all of the virtual machines were moved? (Choose the best answer.)
- A . Recent Tasks
- B . Home Screen
- C . Alerts tab
- D . Workload Utilization dashboard
A
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-62/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-92F9F9E0-2D6F-487F-90DE-C5940EE43494.html
What is required for configuring the autoswitch of dashboards? (Choose the best answer.)
- A . Enabling all dashboards for auto transition, which will then transition all every five minutes, in the order dashboards were first opened
- B . No action; dashboards will automatically switch through all open tabs, with one transition every five minutes
- C . Enabling specific dashboards for auto transition, selecting the switch time interval from one dashboard to the next, and determining the transition order of the enabled dashboards
- D . Deleting dashboards from the autoswitch configuration that should NOT be in the transitions, selecting the switch time interval from one dashboard to the next, and determining the transition order of the remaining dashboards
A
Explanation:
Reference: https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-55ED9D0E-EA27-45B2-9000-3B9A8EEB226B.html
Which items may be contained in a management pack for vRealize Operations? (Choose the best answer.)
- A . Sample configurations, logs and authentication sources
- B . Queries, reports and content packs
- C . Adapter, reports, dashboards, symptoms and alerts
- D . Adapter, resources, logs and views
C
Explanation:
Reference: https://blogs.vmware.com/management/2015/10/exploring-management-packs-in-vrops.html
Which view type would display a tabular data set of specific objects in a monitored environment? (Choose the best answer.)
- A . List
- B . Distribution
- C . Text
- D . Trend
A
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-6EA000E9-0127-45A3-AF31-322EDCFB9EC8.html
Which is a true statement about creating new Alert Definitions? (Choose the best answer.)
- A . All Alert Definitions exist only in the alert policy
- B . Alert Definitions cannot be enabled or disabled in policies
- C . When creating new Alert Definitions, they are enabled by default in the default policies
- D . After creating a new Alert Definition, it must be enabled in policies
A
Explanation:
Reference: https://docs.vmware.com/en/vRealize-Operations-Manager/6.7/com.vmware.vcom.core.doc/ GUID-4C8CAF1E-2B40-4D9C-A18C-2C18CC315B1A.html
Which statement is true about alert ownership? (Choose the best answer.)
- A . A user can assign ownership of an alert to any other user
- B . A user can take ownership of an alert
- C . A user can only assign ownership of an alert to a user within the same group
- D . Ownership is automatically assigned based on the alert definition
B
Explanation:
Reference https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-B8467134-88C9-459A-B2D0-F3BAEAA04D29.html
View the Exhibit
What does the referenced Capacity Remaining widget, when included in a dashboard, display? (Choose the best answer.)
- A . The selected object’s general capacity remaining score and a bar chart of the object’s resource with the least remaining capacity
- B . The selected object resources’ capacity remaining scores represented as bar segments for remaining CPU, memory and disk space
- C . The selected object’s worst resource capacity remaining score and bar segments that list all of the object’s resources enabled by policy for capacity remaining calculation
- D . The selected object’s capacity remaining score and a bar chart showing numbers of subscribers, such as virtual machines on a cluster
B
Explanation:
Reference https://docs.vmware.com/en/vRealize-Operations-Manager/6.6/com.vmware.vcom.core.doc/ GUID-E9D25093-88B6-4102-80BD-580C1B93DF9B.html
Which dashboard provides an overview of the different data centers for which a user is responsible, and helps the user act on alerts to ensure that there are no underlying infrastructure problems? (Choose the best answer.)
- A . Cluster Configuration dashboard
- B . ESXI Configuration dashboard
- C . Operations Overview dashboard
- D . Capacity Overview dashboard
C
Explanation:
Reference https://docs.vmware.com/en/vRealize-Operations-Manager/6.4/com.vmware.vcom.core.doc/ GUID-F31221BB-A8CF-4064-84CE-4963DD5EF246.html
What is the maximum number of nodes in a vRealize Operations cluster for Medium and Large node sizes? (Choose the best answer.)
- A . 4
- B . 16
- C . 1
- D . 2
B
Explanation:
Reference https://kb.vmware.com/s/article/2150421
If a customer determines that high availability (HA) is required for their vRealize Operations (vROps) cluster, which factor will need to be considered? (Choose the best answer.)
- A . Determine how many replica nodes will be needed based on the number of total nodes in the vROps cluster
- B . Ensure that enough vROps cluster nodes have been deployed, as turning HA on will essentially reduce the cluster capacity in half
- C . Ensure that HA is enabled in the Default policy
- D . Remote collectors will NOT be supported once HA is selected
B
Explanation:
Reference https://kb.vmware.com/s/article/2150421 (see notes)
View the exhibit.
Within the Environment tab referenced in the exhibit, which icon should a user select to view the virtual machines with the highest workload? (Choose the best answer.)
- A .
- B .
- C .
- D .
A system administrator of an online banking system application must monitor its Web, App and Database component tiers that affect the performance of its banking system application.
How can these components be monitored in vRealize Operations? (Choose the best answer.)
- A . Creating a custom data center group that hosts the related components
- B . Creating application smart alerts for each of the related components
- C . Creating a group by defining its membership criteria for all the related components
- D . Creating an application that groups the related components for each of the tiers
D
Explanation:
Reference: http://virtual-red-dot.info/multi-tier-application-monitoring/
What is required to collect vSphere data in vRealize Operations (vROps)? (Choose the best answer.)
- A . Install an Endpoint Operations Management Agent on the vCenter appliances or servers where vROps will be collecting from
- B . In the vROps console, navigate to Administration, select Solutions, select the vSphere Management Pack, click the Configure button on the toolbar to input vCenter IP or FQDN and credentials to register the vCenter
- C . In the vROps console, navigate to Administration, select Solutions, click on the + action, and install the vSphere Management Pack
- D . Log in to vCenter and accept the vROps MOB
C
Explanation:
Reference: https://pubs.vmware.com/vrealizeoperationsmanager-6/index.jsp?topic=% 2Fcom.vmware.vcom.core.doc%2FGUID-19DAD6AF-7262-4655-B69F-6C665E33B52F.html