Which two configurations are supported for a virtual machine backup using the Agent for VMware? (Select two.)
- A . GRT item restore for Exchange 2016
- B . GRT item restore for Red Hat Enterprise Linux
- C . GRT item restore for Enterprise Vault
- D . GRT item restore for Active Directory Domain Service
- E . GRT item restore for Distributed SharePoint Farm
Which two alternate destinations are available when using the restore wizard to restore from file and folder backups? (Select two.)
- A . Zip file
- B . Drive and Path
- C . Microsoft Virtual Hard Disk
- D . PST file
- E . VMDK file
What is the recommended amount of free RAM on the Backup Exec server to support 5 TBs of deduplicated data?
- A . 5 GB
- B . 7.5 GB
- C . 8 GB
- D . 10 GB
Which two statistics are displayed in the Job Activity dialog box only when the pre-scan option is enabled? (Select two.)
- A . job rate
- B . elapsed time
- C . estimated time remaining
- D . percent complete
- E . byte count
An administrator runs a Back up to Disk and Simultaneously Convert to Virtual Machine job.
Which two actions occur if the backup job fails? (Select two.)
- A . the conversion job fails
- B . the conversion job succeeds
- C . the conversion job succeeds with exceptions
- D . the conversion job runs again during the next full backup
- E . the conversion job runs again independently
In which two circumstances will the overwrite protection period for a tape begin? (Select two.)
- A . at the start time of an overwrite job (if there are no appends)
- B . at the end time of an over-write job (if there are no appends)
- C . at the start time of the last append operation on a media
- D . at the end time of the first append operation on a media
- E . at the end time of the last append operation on a media
In which two file formats can Backup Exec 16 reports be generated? (Select two.)
- A . RTF
- B . TXT
- C . HTML
- D . PDF
- E . XPS
Which backup method is invalid when performing a SharePoint farm backup using a SharePoint agent?
- A . full – back up databases
- B . full copy – back up databases (copy)
- C . full (block-level)
- D . differential (block-level)
- E . incremental (block-level)
Which catalog mode is invalid in a Central Administration Server Option (CASO) environment?
- A . centralized
- B . distributed
- C . replicated
- D . synchronized
Which option, selected during the backup of NetApp filer using the NDMP feature, will provide the ability to restore an individual file or folder?
- A . Faster recovery option
- B . Enable file history
- C . Back up Access Control Lists
- D . Backup with checkpoint
How is the Capacity Edition licensed?
- A . 1 License per 1 TB of the size of the backup data in all storage devices
- B . 1 License per 1 TB of available backup Storage
- C . 1 License per 1TB of Front-End (source) data
- D . 1 License per 1TB of the deduplicated data size
Which two capabilities are included in the Enterprise Server Option (ESO)?
- A . backup of VMware and Hyper-V environments
- B . Off-Host backup
- C . sharing of tape libraries between multiple Backup Exec servers
- D . centralized management of Backup Exec and NetBackup
- E . backup of Microsoft Exchange
Where is the metadata for the backup sets contained?
- A . in the …Backup ExecCatalogs directory
- B . in the …Backup ExecData directory
- C . in the Backup Exec Database
- D . in the HKLMSOFTWAREVeritasBackup Exec registry key
Which two agents or features are included in the Bronze licensing edition? (Choose two.)
- A . Agent for VMware and Hyper-V
- B . Remote Media Agent for Linux Servers
- C . Agent for Applications and Databases
- D . Deduplication Feature
- E . VTL Unlimited Drive Feature
An administrator is configuring the Amazon S3 cloud-based storage device.
Which two options should the administrator consider to ensure a successful configuration? (Select two.)
- A . The bucket name should start with lowercase letters.
- B . The bucket should be pre-configured before adding a Cloud storage device.
- C . The bucket which is in use by different Backup Exec servers can be shared.
- D . The bucket can be created in any region the Cloud provider designates.
- E . The user must obtain an Amazon access key ID and a secret access key.
What is a capability of the Backup Exec Agent for VMware and Hyper-V?
- A . It supports agentless virtual machine backup and complete recovery of guest virtual machines.
- B . It integrates directly with the Simplified Disaster Recovery (SDR) process to provide complete recovery.
- C . It enables image-level protection of virtual machines with physical Raw Device Mapping volumes.
- D . It shuts down and restarts virtual machines to consistently backup the content.
What is required in order to perform a Simplified Disaster Recovery (SDR) of a system from a deduplicated backup set?
- A . The deduplicated data must be staged to the local server before recovery
- B . The deduplication storage folder must be locally attached to the target server
- C . The deduplication storage folder must be taken offline to prevent backups from running during the restore operation
- D . The target server must connect to a Backup Exec Server with the deduplication storage
Backup Exec allows administrators to make copies of deduplicated backup sets and transfer them to a different Backup Exec 2014 server. The transfer process is optimized, meaning only unique blocks (those not already contained in the deduplication disk storage device of the destination server) are copied.
What is the proper name of this ability?
- A . optimized deduplication
- B . optimized replication
- C . optimized duplication
- D . optimized synchronization
What is the purpose of enabling the Allow Backup Exec to Delete All Expired Backup Sets setting?
- A . It ensures a response to an alert will be required before any backup set is deleted
- B . It ensures Data Lifecycle Management (DLM) is enabled instead of ADAMM
- C . It prevents Backup Exec from keeping the most recent backup set per resource
- D . It causes Backup Exec to immediately delete all expired backup sets and disable the setting
A multi-server backup is failing. After checking the job log, the root cause is unclear.
What is the next action an administrator should take to identify the issue?
- A . perform a test run of the job
- B . run Veritas Quick Assist and review the failed job report
- C . divide the job and back up the servers individually
- D . leave the job intact and enable BEUtility
An administrator has a Central Admin Server (CAS) that was recently upgraded from Backup Exec 2014 to Backup Exec 16 that is displaying the following message: Database Encryption Key Has Not Been Created
What is a possible reason for the message?
- A . A Database Encryption Key is unnecessary for Backup Exec 16 Central Admin Servers (CAS).
- B . Some of the Managed Backup Exec Servers (MBES) have yet to be upgraded to Backup Exec 16.
- C . The CAS was upgraded before the MBES, causing the Database Encryption Key creation to fail.
- D . An export location for the Database Encryption Key has yet to be defined in the CAS settings.
Which Cloud based storage support is added with Backup Exec 16?
- A . Amazon
- B . Google
- C . Azure
- D . Quantum
When the Deduplication feature is installed on a Backup Exec server, four services are installed.
Which two services are also available on a remote computer that has the Agent for Windows installed, even if the Deduplication feature is unavailable on the Backup Exec server?
- A . Backup Exec Deduplication Engine and Backup Exec Deduplication Manager
- B . Backup Exec Deduplication Manager and Backup Exec Deduplication Multi-threaded Streaming Agent
- C . Backup Exec Deduplication Engine and Backup Exec PureDisk Filesystem Service
- D . Backup Exec PureDisk Filesystem Service and Backup Exec Deduplication Multi-threaded Streaming Agent
What are two requirements for enabling the Backup Exec Management Command Line Interface (BEMCLI)? (Select two.)
- A . Microsoft ReportViewer
- B . Microsoft Visual C + + Redistributable
- C . Microsoft Silverlight
- D . Microsoft .NET 3.5
- E . Microsoft Windows PowerShell V2
An administrator is using Simplified Disaster Recovery to perform a full recovery of a Symantec Backup Exec server including the volume that contains the deduplication storage folder.
Which two conditions will exist after the recovery is performed? (Select two.)
- A . All backup sets sent to the deduplication storage folder after it was backed up will be restored.
- B . Any existing backup sets sent to the deduplication storage folder after it was backed up are unavailable.
- C . The Symantec Backup Exec media server will be fully functional, including all media devices.
- D . The deduplication storage folder logon account will need to be reset.
- E . The deduplication storage folder will need to be restored via Shadow Copy Components.
What are two functions of media rotation? (Select two.)
- A . determines the way media are used and reused
- B . defines rules for duplicating media
- C . allows access to multiple sets of data
- D . load balances backup jobs
- E . ensures that media is sent offsite
Which option is an administrator unable to select when configuring a test run job?
- A . check logon account credentials
- B . check for checksum errors
- C . check for sufficient storage space
- D . check that media is available
An administrator’s robotic library has gone offline the last three times the same piece of media has been used.
Where can the administrator look to determine whether the tape has any soft or hard errors?
- A . on the properties of the media set
- B . on the properties of the tape drive
- C . on the properties of the job history
- D . on the properties of the media
Which benefit is provided by the Instant GRT (Granular Recovery Technology) feature?
- A . detailed catalog information
- B . the ability to perform a search of GRT items from the catalog
- C . faster browsing of GRT data on restores
- D . faster backups
When should an administrator disable the option Request all media in the sequence for catalog operations within the Backup Exec settings?
- A . when cataloging deduplication storage folders
- B . when media is missing within spanned backup sets
- C . when cataloging incremental backups only
- D . to free disk space by purging catalogs from disk
Which action can an administrator perform during the Backup Exec database maintenance?
- A . apply patches to the database
- B . take the database offline
- C . delete expired data from the database
- D . put the database into single user mode
An administrator has several expired backup sets that are still showing under the configured Disk Storage.
Which two reasons will prevent the expired backup sets from being deleted? (Select two.)
- A . There are other unexpired backup sets that are dependent on them.
- B . The expired backup sets need to be duplicated before they will be deleted.
- C . The expired backup sets are part of a (Simplified Disaster Recovery) SDR-enabled backup.
- D . The expired backup sets have to be overwritten by a new backup job.
- E . The expired backup sets need to be manually deleted from the Backup Exec console.
Which utility operation should an administrator perform within Backup Exec when adding new blank media?
- A . Catalog
- B . Import
- C . Label
- D . Inventory
Which two types of information are held in the Backup Exec server catalogs?
(Choose two.)
- A . the resource credentials
- B . the resource
- C . the primary copy
- D . the backup time stamp
- E . the device credentials
Which command must an administrator use to start the Agent for Linux daemon?
- A . /etc/VRTSralua/RALUS.init start
- B . /etc/init.d/VRTSBE.init start
- C . /etc/init.d/RalusAqent.init start
- D . /etc/init.d/VRTSralus.init start
Which kind of storage destination is managed through media set rotation?
- A . disk cartridge storage
- B . tape storage
- C . cloud storage
- D . deduplication storage
Which selection methods are available in the Restore Wizard when creating a Files, folders, or volumes restore job?
- A . file and folder backups to an SDR recovery point, file and folder backups from a backup set, and file and folders located through search
- B . file and folder backups to a point-in-time, file and folder backups from a backup set, and file and folders located through search
- C . file and folder backups to an NTFS checkpoint, file and folder backups from a backup set, and file and folders located through search
- D . file and folder backups to a change journal sequence number, file and folder backups from a tape, and file and folders located through search
An administrator needs to ensure that any new resources added to a server in the future will be automatically included in the backup job.
How should the administrator make the selections to ensure dynamic protection?
- A . Check the box next to the server name
- B . Check the job option for dynamic inclusion
- C . Use the Advanced File Selection page to dynamically include all resources on the server
- D . Enable the option to Discover Data to Back Up in Backup Exec Settings
What is the most efficient way an administrator can test logon accounts?
- A . Manage Logon Accounts > Test > select the servers
- B . log in to each server individually with the account
- C . BEUtility > Test Service Account
- D . create a Server Group and test credentials
A VMware backup job is configured with GRT selected and the Delayed Catalog is set to run immediately after the backup job. The backup job completes successfully, but the Delayed Catalog job fails.
Which statement is accurate for the GRT restore ability of this VMware GRT backup set?
- A . neither GRT Search or Browse Restore are possible
- B . only a GRT Search restore is possible
- C . both GRT Search and Browse restore are possible
- D . only a GRT Browse restore is possible
Which software encryption recommendation is part of Veritas best practices?
- A . Use the Blowfish encryption algorithm.
- B . Avoid using the same encryption keys for all synthetic backup templates.
- C . Avoid using hardware compression with software encryption.
- D . Use 128-bit encryption to be FIPS compliant.
An administrator has restored the System State which has created a temporary directory named F52E2DD5-CE7D-4e54-8766-EE08A709C28E, and wants to delete the directory.
Where can the administrator find the temporary directory?
- A . %SYSVOL%
- B . C:temp
- C . C:WindowsSystem32
- D . %SystemRoot%
An administrator is attempting to browse file and directory details, but only backup set header information is available.
What may be the cause for the lack of detailed information; and how should the administrator enable the selection of individual items for restore?
- A . The backup sets have expired, and the media must be re-cataloged.
- B . The backup sets have expired, and the media must be re-inventoried.
- C . The Backup Exec server catalog settings have been set to truncate automatically, and the media must be re-cataloged.
- D . The Backup Exec server catalog settings have been set to truncate automatically, and the media must be re-inventoried.
Which two choices of agents or options are included with the V-Ray Edition of Backup Exec? (Select two.)
- A . NDMP Option
- B . Agents for Applications and Databases on virtual machines
- C . Library Expansion Option
- D . Enterprise Server Option
- E . Deduplication Option
The Tag as Business-Critical option allows users to select resources that are most important to business continuity.
Which two resources can be tagged as business-critical? (Choose two.)
- A . Exchange databases
- B . partial selections
- C . SQL instances
- D . Enterprise Vault resources
- E . resources from an older version of Backup Exec
What is an unsupported method of deduplication in Backup Exec 15?
- A . appliance deduplication on an Open Storage device
- B . client-side deduplication for Linux
- C . client-side deduplication for Mac
- D . server-side deduplication
Which statement is correct about configuring OpenDedupe storage?
- A . OpenDedupe must be shared in CAS-MBES scenario to get a better deduplication ratio.
- B . Multiple Backup Exec servers can use the same cloud container with OpenDedupe.
- C . OpenDedupe is supported on Windows Server 2012 R2 or above.
- D . OpenDedupe can be configured directly from the Backup Exec console.
Which two file formats are available when attaching Backup Exec job logs to emails? (Select two.)
- A . DOC
- B . TXT
- C . HTML
- D . PDF
- E . CSV
Which two options can be selected from the Database Maintenance settings in Backup Exec? (Select two.)
- A . optimize database performance
- B . perform database validation
- C . perform database consistency check
- D . optimize database size
- E . perform database tuning
An administrator is unable to proceed with the configuration of disk storage on a second disk on the Backup Exec server.
What could be the possible reason?
- A . The disk has unformatted partitions.
- B . The disk is initialized, but partitions need to be created.
- C . The disk is already used as a Backup Exec disk storage.
- D . The disk has a volume configured, but needs to have a drive letter assigned.
Within which section of Backup Exec Settings should the administrator define the Database Encryption Key export path?
- A . Preferences
- B . Network and Security
- C . Database Maintenance and Security
- D . Storage
Which type of server should an administrator choose in Add a Server wizard under the Backup and Restore tab to add a SQL server?
- A . File server or NDMP data server
- B . Microsoft Windows computers and servers
- C . Microsoft SQL server
- D . Microsoft SharePoint server farm
What are two advantages of enabling the ‘Use storage-based catalogs’ option?
- A . Faster cataloging is available
- B . Detailed cataloging is available
- C . New catalogs are created by reading each file block
- D . On-media catalogs are copied to the Backup Exec server
- E . The size of catalogs is reduced
Which two methods can an administrator use to find more information on Backup Exec job error messages? (Choose two.)
- A . review the job log and click the UMI link
- B . use the Backup Exec Diagnostic utility Bediag.exe
- C . in the Administrative Console, open the Help pages and search for the error
- D . use the Veritas Quick Assist tool
- E . search the Veritas Technical Support Knowledge base for common errors
Which activity information is an administrator unable to configure for display in the Audit Logs?
- A . Alerts
- B . Error-Handling Rules
- C . Reports
- D . Logon Accounts
An administrator has 3 VMware hosts running a total of 25 virtual machines. Each host has 2 Quad-Core CPU sockets.
How many V-Ray licenses does the environment require?
- A . 1 V-Ray license is necessary to cover the whole environment
- B . 3 V-Ray licenses are necessary; one for each host
- C . 6 V-Ray licenses are necessary; one for each CPU socket
- D . 25 V-Ray licenses are necessary; one for each virtual machine
An administrator used SGMon.exe for troubleshooting and closed it once the issue was resolved, but the debug logs keep increasing and the C drive is running out of space.
How can the administrator disable the debug logging?
- A . open SGMon.exe again, stop the live debugging, and close it
- B . open the task manager and kill SGMon.exe
- C . open SGMon.exe and uncheck the option Enable job engine and agent for windows debugging outside the debug monitor
- D . open ServicesMgr.exe, stop the Backup Exec services, delete the debug logs, and restart the services
Which notification option is supported by Backup Exec?
- A . MAPI
- B . pager
- C . Net-send
- D . SMTP
How can publishing be disabled for a remote server on which the Agent for Windows is installed?
- A . run Backup Exec Utility on the Backup Exec server and clear the "Enable the Agent for Windows to publish information to the Backup Exec servers in the list" check box under the Publishing tab
- B . run the Backup Exec Agent Utility on the Backup Exec server and clear the "Enable the Agent for Windows to publish information to the Backup Exec servers in the list" check box under the Publishing tab
- C . run Backup Exec Utility on the remote server and clear the "Enable the Agent for Windows to publish information to the Backup Exec servers in the list" check box under the Publishing tab
- D . run the Backup Exec Agent Utility on the remote server and clear the "Enable the Agent for Windows to publish information to the Backup Exec servers in the list" check box under the Publishing tab
Refer to the exhibit.
Backup Exec catalogs each backup job.
What is the effect if the catalogs are truncated in the Backup Exec server’s settings?
- A . restores fail
- B . only backup set information is listed in the restore wizard
- C . no backup set information is listed in the restore wizard
- D . restores are only performed from disk devices