Which volume pool holds cleaning media?
- A . Scratch
- B . NetBackup
- C . None
- D . DataStore
An MSDP Media Server is experiencing performance issues when running multiple deduplication backup jobs concurrently over 10 GbE. When switched to AdvancedDisk on the same Media Server, the backups perform well.
Which step can be utilized to mitigate the performance issues?
- A . reduce network congestion between clients and the Media Server
- B . increase the size of the MSDP disk pool on the Storage Server
- C . add load balancing Media Servers for the Storage Server
- D . set the clients to back up over SAN
What is the state of the catalog backup media after successful completion of a catalog recovery using the Catalog Recovery Wizard?
- A . Suspended
- B . Active
- C . Imported
- D . Frozen
An administrator is performing a backup and receives the following error message: 129 Message: Disk storage unit is full.
Which Netbackup command should the administrator use to report the potential free space of AdvancedDisk storage units?
- A . nbdevquery
- B . nbdiscover
- C . nbemmcmd
- D . bpdbdm
Which command should an administrator use to determine which storage lifecycle policy’s image copies are incomplete?
- A . nbstl
- B . nbreplicate
- C . bpimage
- D . nbstlutil
Which command should an administrator run to display all images written to both disk and tape for a particular client?
- A . bplist
- B . bpimmedia
- C . bpimage
- D . bpstulist
When NetBackup makes more than one image copy simultaneously during the backup, it is called _____________.
- A . Simultaneous copy
- B . Inline copy
- C . Duplication copy
- D . Storage life backup
Where can an administrator add or list the service providers for cloud storage?
- A . NetBackup Management > Host Properties > Media Servers > Scalable Storage
- B . NetBackup Management > Host Properties > Master Servers > Scalable Storage
- C . NetBackup Management > Host Properties > Master Servers > Cloud Storage
- D . NetBackup Management > Host Properties > Media Servers > Cloud Storage
The administrator has a master server running over 50,000 jobs per day.
What can the administrator do to reduce the load on the master server?
- A . replicate the backups to another master server domain
- B . configure a new master server to distribute the backup load
- C . add additional media servers to the environment
- D . configure client-side deduplication and load balancing media servers
An administrator needs to recover the NetBackup master server catalog at a disaster recovery site, but the DR files are unavailable.
Which command should the administrator use to recreate the DR file?
- A . bprecrover
- B . nbcatsync
- C . bpimport
- D . cat_import
A restore has failed with the following job details:
Which two resources should the administrator use to troubleshoot this issue? (Select two)
- A . the bpmedia command
- B . the robtest command
- C . the operating system logs
- D . the logs from the NetBackup tar process
- E . the nbdevconfig command
An administrator wants to review the throughput of backup clients to improve performance.
Which area of the NetBackup Administration Console displays the throughput of backups for all clients?
- A . Status of Backups
- B . Device Monitor
- C . All Log Entries
- D . Client Backups
Which of the following is not a selection type of storage unit groups?
- A . First-in First-out
- B . Failover
- C . Priority
- D . Round Robin
An administrator is working with a Linux media server and has received a status code 80 with the following error message: Media Manager device daemon (ltid) is not active After attempting to start the daemon ltid manually, the administrator continues to receive the same error.
Which configuration file should the administrator change to enable VERBOSE level to this daemon (ltid)?
- A . bp.conf
- B . vm.conf
- C . emm.conf
- D . st.conf
Refer to the exhibit.
Two media servers, sharing a library with 10 tape drives, exist in the NetBackup 8.0environment displayed in the exhibit. Both weekly full and daily differential incremental backups need to run for the clients and each schedule has a different retention period.
Because of network topology, some clients back up to Media Server 1 and some back up to Media Server 2. The environment suffers from multiple status 96 failures during the backup window.
How can the administrator minimize the number of failures?
- A . increase the Media unmount delay
- B . configure media multiplexing
- C . enable backups to span tape media
- D . enable media sharing
The NetBackup Resource Broker (NBRB) maintains resource requests for jobs that are queued.
Which two criteria does NBRB use to evaluate the resource requests and provide resources to each job sequentially? (Select two.)
- A . job priority
- B . date of last successful backup
- C . data classification rank ID
- D . time when NBRB receives the request
- E . retention level
A file system on a server is corrupt and a restore is required. The system is being backed up using True Image Restore with move detection enabled.
The most recent backups of this file system are displayed below.
– Monday: A full backup
– Tuesday: A differential incremental backup
– Wednesday: A cumulative incremental backup
– Thursday: A differential incremental backup
What is the minimum number of backup images that will be used to fully restore the server?
- A . one
- B . two
- C . three
- D . four
What is the default length of time that true image restore (TIR) information is retained in the NetBackup catalog?
- A . 1 day
- B . 3 days
- C . 28 days
- D . 30 days
Which NetBackup components can be updated with VxUpdate?
- A . clients
- B . media servers
- C . media servers and master servers
- D . media servers and clients
Using the default values in the activity monitor, a failed job is discovered among hundreds of jobs that ran during the evening. The administrator would like to view all related jobs to verify they completed successfully.
Where in the activity monitor can the administrator find all related jobs?
- A . right-click the failed job and select View Job hierarchy
- B . right-click the failed job and select Troubleshooter
- C . double-click the failed job and select the Detailed Status tab
- D . right-click the failed job and select Details
An administrator needs to enable the media server to detect backup anomalies. To do this, the administrator needs to copy the NB_Anomaly.db file from the anomaly_detection folder on the primary server to the anomaly_detection folder on the media server.
On which path can the administrator locate the anomaly_detection folder in the primary server?
- A . /usr/openv/netbackup/dbext
- B . /usr/openv/netbackup/ext/dbext
- C . /usr/openv/netbackup/db
- D . /usr/openv/var/global
Upon arriving at work on a Monday, an administrator sees several replication Jobs that have failed with the following error message: No images were successfully processed
Which two reasons may be the cause for the error code? (Select two.)
- A . The checkpoint restart is disabled for the replication Jobs.
- B . There are network connectivity issues between the source and target domains.
- C . The NetBackup host ID-based certificate was revoked.
- D . There is insufficient storage space on the target storage server.
- E . There are insufficient tapes in the replication volume pool.
An administrator has an environment that runs over one thousand jobs a night. Some nights there are hundreds of jobs queued waiting for a resource.
Which action should the administrator take in the event that specific jobs need to run when a resource next becomes available during that evening’s backup session?
- A . suspend the job and resume the job after changing the policy job priority
- B . change the job priority for the job in the policy
- C . increment the job priority in the activity monitor for the job
- D . cancel the job and restart the job after changing the policy job priority
By using the robot front panel, an operator ejects media 000001 from robot TLD (1) and inserts it into robot TLD(2). Neither robot has a barcode reader.
Which two actions should the administrator in the administration console to update the EMM database accordingly and show media 000001 at the new location? (Select two.)
- A . run a robot inventory on both robots
- B . move media 000001 to standalone
- C . change the volume pool in media 000001 properties
- D . label media 000001
- E . move media 000001 from standalone to robot 2
Where in the NetBackup Administration Console should an administrator look to determine whether an AdvancedDisk storage server is configured?
- A . Media and Device Management > Device Monitor
- B . Media and Device Management > Devices
- C . NetBackup Management > Storage
- D . Media and Device Management > Credentials
An administrator runs the following command on the Master Server to test connectivity to a client:
bptestbpcd -client clientA
The administrator receives the following message:
<16> bptestbpcd main: Function ConnectToBPCD (clientA) failed: 25 cannot connect on socket
Which two reasons may cause the error message? (Select two.)
- A . an incorrect entry for the Master Server in the client’s hosts file
- B . the NetBackup processes on the client are stopped
- C . the Master Server is unknown to the client
- D . an incorrect entry for the client in the Master Server’s hosts file vnetd is stopped on the Master Server
Which status code applies only to disk storage units?
- A . 129
- B . 86
- C . 219
- D . 2805
What does media sharing mean in NetBackup?
- A . More than one backup application can write data to a tape
- B . More than one media server can append to the same tape
- C . More than one master server has the same tape in its catalog
- D . Data from more than one client can be written to a tape
Which two catalog components contain information on what has been backed up and its metadata in NetBackup? (Select two.)
Media
- A . Image
- B . Volume
- C . NBDB
- D . Class
An administrator has a backup for client Linux1 using the LinuxClients policy complete successfully, even though the policy Backup Selections are NOT modified, the backup job fails the next day with the following status code: Error 71: none of the files in the file list exist.
What is a possible reason the job failed?
- A . The Enable granular recovery option was unset.
- B . The client was added to another backup policy.
- C . The file systems have been unmounted on the client.
- D . The client was temporarily shut down.
Which two options are available to an administrator to bring the MSDP catalog back online in the case of a hardware problem that caused corruption? (Choose two.)
- A . restore the MSDP catalog from a MSDP catalog shadow copy.
- B . restore the MSDP catalog from the NetBackup catalog backup.
- C . recover the MSDP catalog from a MSDP catalog backup.
- D . repair the MSDP catalog using the recoverCR tool.
- E . repair the MSDP catalog using the crchk tool.
A restore must be performed. An administrator is attempting to view the valid images for a client, but the following error occurs: WARNING: Server does not contain any valid images.
Which two parameters may be configured incorrectly? (Select two.)
- A . Schedule type for restores
- B . Destination client for restores
- C . Server to use for backups and restores
- D . Media Server for backups and restores
- E . Policy type for restores
Which backup storage is unsupported with media server load balancing?
- A . BasicDisk
- B . Media Server Deduplication Pool
- C . AdvancedDisk
- D . Media Manager storage
Where should an administrator look in the NetBackup Administration Console to determine whether an AdvancedDisk storage server is configured?
- A . Media and Device Management > Credentials > Disk Array Hosts
- B . Media and Device Management > Device Monitor > Storage Servers
- C . Media and Device Management > Devices > Storage Servers
- D . Media and Device Management > Credentials > Storage Servers
Which servers are listed when selecting the client package during the creation of a new deployment policy?
- A . only media servers
- B . media servers and client servers
- C . only client servers
- D . media servers and primary servers
An administrator is using Storage Lifecycle Policies (SLP) to back up to a local Advanced Disk pool, duplicate to a local MSDP pool, replicate to an off-site MSDP pool, and finally duplicate to an off-site tape library which needs to be kept for a period of three years.
Which retention type should the administrator select for the SLP import operation?
- A . Expire after copy
- B . Fixed
- C . Capacity Managed
- D . Target Retention
An administrator is experiencing a communication issue between the master and client and believes the certificate might be revoked.
Which log can the administrator view to analyze a certificate issue?
- A . nbemm
- B . nbrb
- C . vnetd
- D . bprd
When an administrator creates a duplicate copy of an image, what will the retention be for the new copy?
- A . The specified date plus the retention period
- B . The duplication date plus the new retention period
- C . The system date plus the new retention period
- D . The backup date plus the new retention period
Backup jobs to an MSDP storage unit of a large EXT3 file system for a Linux client connected via a 1 GbE network are taking excessive time.
Which two settings should an administrator change to improve the performance of the backups? (Select two.)
- A . enable client-side deduplication
- B . enable multiplexing
- C . enable Use Change Journal for the client
- D . enable Use Accelerator for the policy
- E . enable WAN optimization
Weekly full backups run for clientA on master1 using a storage unit that belongs to media1. The administrator is required to retain clientA’S full backups for a period of four months. When the administrator modifies the full schedule, an option for 4 months is missing from the Retention drop-down list.
How can the administrator add a four-month retention?
- A . modify an existing retention level in the server host properties, under Retention Periods
- B . ignore the selection list and type in the desired retention period directly
- C . add a new retention period in the media server host properties, under Retention Periods
- D . increase the Image cleanup Interval in the master server host properties, under Clean- up
Where is the option to allow communication with NetBackup 8.0 and earlier hosts without certificates?
- A . NetBackup Administration Console > Security Management > Global Security Settings > Secure Communication tab.
- B . NetBackup Administration Console > Host Properties > Master Servers > Access Control
- C . NetBackup Administration Console > Host Properties > Master Servers > Firewall
- D . NetBackup Administration Console > Security Management > Global Security Settings > Access Management
Some NetBackup jobs are affected by the failure of a disk in an Advanced Disk pool, but the jobs are unavailable to view in the Activity Monitor.
In which two places can the administrator view Net Backup jobs affected by the disk failure? (Select two.)
- A . Media and Device Management > Device Monitor > Disk Pool
- B . NetBackup Management > Reports > Disk Reports > Disk logs
- C . NetBackup Management > Reports > Disk Reports > Disk Pool Status
- D . NetBackup Management > Reports > Disk Reports > Disk Storage Unit Status
- E . NetBackup Management > Reports > Media Logs
What is the Certificate Authority (CA) for NetBackup?
- A . an OpsCenter Server
- B . a media server
- C . a master server
- D . an Appliance Management Server
Which statement or statements describe the Scratch volume pool?
- A . The Scratch pool donates volumes to pools that need additional available volumes.
- B . There is one Scratch volume pool per NetBackup domain.
- C . All of the above.
- D . The Scratch volume pool is an optional volume pool.
Refer to the exhibit.
An assigned backup tape contains four images, two of which are expired. A new backup is initiated.
How does NetBackup write the new image?
- A . it appends new images to the last file marker on the tape
- B . it writes new images to the space where the expired images once resided on the tape
- C . it overwrites the expired data on the tape with the new images
- D . it writes the new image to an alternate tape
Where can an administrator change a disk pool to Down status in the NetBackup Administration Console?
- A . Media and Device Management > Device Monitor > Disk Pools
- B . NetBackup Management > Storage > Storage Unit
- C . Media and Device Management > Credentials > Storage Servers
- D . Media and Device Management > Devices > Disk Pools
A restore using the Java BAR is being attempted. Care has been taken to select the appropriate source client, but no backup image content is displayed.
What could be a reason for this to happen?
- A . All of the above.
- B . The wrong policy type has been specified.
- C . The date range is incorrect.
- D . The path does not exist in the images that have been selected.
On which system(s) is the NetBackup 8.0LiveUpdate agent installed by default?
- A . Master Server only
- B . Master Server and Media Server only
- C . Master Server, Media Server, and client
- D . Media Server and client only
An administrator has a Synthetic backup that fails with a status code 1, and the error message: No images were found to synthesize (607)
Which steps should the administrator take to determine why the backup failed?
- A . check the client attributes in Host Properties.
- B . check the policy backup selection list.
- C . check the schedule’s Storage Unit for compatibility.
- D . check the policy schedules.
An organization needs to have backups span between different BasicDisk storage units. The "Allow backups to span disk" setting has been enabled in Host Properties.
Which additional requirement must an administrator meet to allow backups to span disks?
- A . enable the "Enable standalone drive extension" setting in host properties
- B . put the BasicDisk storage units in a storage unit group
- C . create a disk pool with all the appropriate disk volumes
- D . configure the Media Server as a Storage Server
A NetBackup Master Server has commenced writing four long-running duplication jobs to an AdvancedDisk disk pool. The value of Maximum concurrent jobs for the storage unit and Limit I/O streams for the disk pool are both set to 4.
There are 35 jobs queued on the Master Server that require this disk pool:
– 5 replication jobs with priority 9999
– 10 backup jobs with priority 999
– 20 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?
- A . Backup
- B . Duplication
- C . Replication
- D . Restore
An administrator configures a default Standard file system backup policy, which backs up very large file systems from a set of clients, There are multiple scheduled backup attempts configured.
How can the administrator reduce the amount of time needed to complete these backup jobs alter failures?
- A . configure the Take checkpoints every policy setting
- B . increase the Job retry delay host property setting
- C . use the Resume Job action instead of Restart Job
- D . increase the Client connect timeout host property setting
An administrator has a backup policy with the following policy attributes:
– 3 paths listed in the Backup Selections list
– 5 clients listed in the Clients list
– Allow multiple data streams is selected
– Limit Jobs per policy is set to 4
How many jobs go Active when the job is started, excluding parent jobs?
- A . 3
- B . 4
- C . 12
- D . 15
A UNIX client has the mount points listed below:
/var
/usr
/opt
/home
A backup policy for this client has "Allow multiple data streams" enabled and contains a backup selections list with the ALL_LOCAL_DRIVES directive. It also contains an exclude list that excludes /home.
What happens when this backup policy runs?
- A . all backup jobs complete successfully
- B . backup jobs are created for all mount points except for /home
- C . the backup job for /home is partially successful because /home is excluded
- D . the backup job for /home fails because /home is excluded
What is device serialization?
- A . A method of reporting device errors to NetBackup
- B . A separate interface used to configure standalone tape drives
- C . The order in which devices are configured by the wizard
- D . A firmware feature that enables device identification and configuration
Which command should an administrator use to generate a list of all files backed up on a client for a specific backup job?
- A . bpimage
- B . bplist
- C . bpimagelist
- D . bpdbjobs
Which two schedule types are allowed for the NBU-Catalog policy type? (Select two.)
- A . Automatic Backup
- B . Vault Catalog Backup
- C . Full Catalog Backup
- D . Full Backup
- E . Application Backup
Which file contains LiveUpdate server configuration?
- A . pd.conf
- B . bp.conf
- C . nblu.conf
- D . vm.conf
An Advanced Disk storage unit consistently reaches capacity, causing older, staged backups to expire.
How can the administrator control the prioritization of images that get removed?
- A . change the priority for secondary storage lifecycle operations
- B . use Data Classification
- C . change the priority of relocation jobs in the staging schedule
- D . modify Retention Levels
Which two actions should an administrator take to allow NetBackup to manage the allocation of volumes to volume pools? (Select two.)
- A . define a scratch pool and add all of the volumes to it so NetBackup will move volumes to the other pools as volumes are needed
- B . assign volumes to all volume pools as required in the environment
- C . define a scratch pool with assigned volumes so NetBackup will move the assigned volumes to other pools as volumes are needed
- D . create volume pools as required, but refrain from adding volumes to the pools
- E . assign volumes to NetBackup and DataStore volume pools so NetBackup will move the assigned volumes to other pools as volumes are needed
The MSDP catalog on a Media Server has become corrupted.
Which two methods are available to bring the MSDP pool back online? (Select two.)
- A . restore the MSDP catalog from the NetBackup catalog backup
- B . recover the MSDP catalog from the MSDP catalog backup
- C . repair the MSDP catalog using the crchk tool
- D . restore the MSDP catalog from an MSDP catalogshadow copy
- E . repair the MSDP catalog using the recoverCR tool
When is it most appropriate to use multiple data streams?
- A . When backup up ALL_LOCAL_DRIVES to multiple tape drives
- B . When different backup selections are on the same disk
- C . When performing backups over a network that is very busy
- D . When you have very small backup jobs
Which feature is unavailable for all NetBackup cloud providers when configuring cloud storage using the Cloud Storage Server Configuration wizard?
- A . Compression
- B . Encryption
- C . Spanning volumes
- D . Use Secure Sockets Layer
Which volume pool must be manually created in NetBackup?
- A . None pool
- B . OataStore pool
- C . Scratch pool
- D . CatalogBackup pool
Which is the default volume pool used by catalog backup while backing up to tape?
- A . NetBackupCatalog
- B . CatalogPool
- C . CatalogBackup
- D . NetBackup
Consider the configuration information for a single UNIX client displayed below.
Allow Multiple Data Streams is enabled.
ALL_LOCAL_DRIVES is specified.
Media multiplexing is set to 6.
Three tape drives are available in the storage unit and multiplex per drive is 2.
Max Jobs per Client is set to 8.
The client has five local file systems with no exclude list.
How many concurrent data streams will there be when the policy runs?
- A . two
- B . three
- C . five
- D . six
- E . eight
Which statement is false about NetBackup deduplication?
- A . Deduplication can be performed at the disk block level
- B . Fingerprinting of data can be performed on the server side as well as the client side
- C . Deduplication uses a capacity-based license
- D . Media server deduplication has only been available since NetBackup 7.0
Which utility should an administrator use to verify tape device configuration?
- A . nbdevquery
- B . tpext
- C . bpmedia
- D . tpconfig
An image of the volume past is expiration date or has reached its maximum number of mounts is no longer available for restores.
- A . True
- B . False
What is the default value of Federal Information Processing Standards (FIPS) mode in NetBackup?
- A . Enabled
- B . Disabled
- C . Active
- D . Inactive
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes were frozen?
- A . ltid
- B . robots
- C . bptm
- D . bpdm
An administrator is comparing the NetBackup Accelerator and NetBack up FlashBackup features to determine which feature should be used for backup of a very large file system with millions of files.
Which consideration is irrelevant when determining whether to use NetBackup Accelerator or Net Back up FlashUackup in the situation?
- A . the file system change rate
- B . the file system storage capacity
- C . the type of file system being used
- D . the file system folder depth
An administrator is creating a Standard policy with the option ”Use Accelerator” to back up files on a Linux server.
Which two options are disabled by default in this type of policy? (Choose two.)
- A . Cross mount points
- B . Compress
- C . Collect true image restore information
- D . Allow multiple data streams
- E . Encrypt
What is the default value for the data-in-transit encryption setting on the primary server after an upgrade to NetBackup 10.0?
- A . Preferred On
- B . Enforced
- C . Preferred Off
- D . Automatic
Refer to the exhibit.
A backup job configured with a retention level of 2 and Policy volume pool set to the server_tapes is failing due to status code 96: Unable to allocate new media for backup.
See the output of the available_media command below:
Which task in the NetBackup Administration Console should the administrator perform to resolve the status code 96 error?
- A . Change volume C11201 to the scratch_pool volume pool
- B . Change volume E02002 to the scratch_pool volume pool
- C . Unfreeze volume E02004 in the server_tapes volume pool
- D . Change volume E02003 to the scratch_pool volume pool
An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes.
How can the administrator modify the time between backup attempts?
- A . modify the Job retry delay host property
- B . modify the Policy update interval host property
- C . modify the Schedule backup attempts host property
- D . modify the Take checkpoints every value in the backup policy
Which disk type is unsupported in a Media Server Load Balancing storage unit group?
- A . Pure Disk
- B . BasicDisk
- C . AdvancedDisk
- D . Cloud Storage
A job fails with the following message:
Error bpbrm (pid=5942) Cannot connect to winclient.example.com
Info bpbkar (pid=0) done. status: 58: can’t connect to client
The administrator verifies the default OS host name resolution order is in place in all the environments, but finds an incorrect entry for the client in the media server’s hosts file and corrects it.
The hosts file on the client is properly configured. The administrator restarts the job, but the job fails with the same error message.
Which action should the administrator perform to ensure the job completes successfully?
- A . restart the NetBackup services on the master server
- B . create a DNS record for the client
- C . run bpclntcmd -clear_host_cache command on the media server
- D . restart the NetBackup services on the client
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed? (Choose two.)
- A . bpimage
- B . bpimmedia
- C . bpimagelist
- D . bpmedia
- E . bpimport
A NetBackup administrator configures a policy to perform file system backups of multiple client systems using the Allow multiple data streams feature. All other policy attributes are at default settings.
Which Master Server parameter must be configured to enable the backup jobs from a client to run concurrently?
- A . Target storage unit: Maximum concurrent jobs
- B . Global Attributes: Maximum jobs per client
- C . Client Attributes: Maximum data streams
- D . Target storage unit: Enable multiplexing
Backups can be initiated by many methods.
Which method does not apply?
- A . As a user scheduled backup.
- B . Manually from the command line.
- C . Manually from the NetBackup Administration Console.
- D . Automatically, based on a policy schedule.
An administrator configures storage units STU-A and STU-B into a storage unit group in Failover mode.
If STU-A is busy, what happens to a new job going to the storage unit group?
- A . queues and waits for STU-A to become available
- B . queues and then initiates job to STU-B
- C . fails over and writes backups to STU-B
- D . fails with a status code 219: Required storage unit is unavailable
Which statement applies to a NetBackup calendar based schedule in a Windows policy type?
- A . the backup may run on a day with a closed backup window with Retries allowed after runday
- B . an Exclude date may be configured to occur on an included recurring day of the week
- C . configuring a start window spanning midnight is invalid
- D . a calendar based schedule can run twice a day
A backup image on tape is due to expire in one week. The administrator needs to keep the image available for restore indefinitely.
Which two methods can be used to accomplish this goal? (Select two.)
- A . use the bpexpdate command to change the expiration date of the image
- B . use the bpretlevel command to customize the retention level
- C . use the bpimmedia command to freeze the tape
- D . use the bpduplicate command to create a copy with an infinite retention
- E . use the vmchange command to change the expiration date of the tape
Which statement describes how Catalog backups can be scheduled?
- A . All of the above
- B . According to frequency
- C . According to calendar
- D . After each backup session
Which command is used to determine the state of an AdvancedDisk storage server?
- A . nbdevconfig
- B . nbdevquery
- C . nbemmcmd
- D . nbstserv
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.
Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
- A . set Enable unrestricted media sharing for all media servers
- B . increase Restore retries
- C . increase Delay on multiplexed restores
- D . add the client IP addresses to Resilient Network
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?
- A . create a differential or cumulative incremental backup schedule
- B . select a backup destination that supports synthetic backups
- C . enable Collect true image restore information with move detection
- D . create a full backup schedule with Accelerator forced rescan enabled
Which schedule can be configured as a synthetic backup in addition to the full backup schedule type?
- A . differential incremental backup
- B . cumulative incremental backup
- C . user backup
- D . application backup
- E . automatic backup
Which information is validated during an image verification operation?
- A . data on the client is validated with data on the volume
- B . data on the client is validated with data in the NetBackup catalog
- C . data on the volume is validated with data in the NetBackup catalog
- D . data on the client and the volume is validated with data in the NetBackup catalog
In which order should an administrator perform upgrades to a major release in a NetBackup environment?
- A . Master Server, OpsCenter Server, Media Server, Clients
- B . OpsCenter Server, Master Server, Media Server, Clients
- C . Master Server, Media Server, OpsCenter Server, Clients
- D . Master Server, Media Server, Clients, OpsCenter Server
Which restore method enables simplified search and retrieval across multiple NetBackup domains?
- A . The NetBackup Administration Console
- B . The OpsCenter Operational Restore feature
- C . The Backup, Archive and Restore interface
- D . The NetBackup Operations Manager Interface
What should an administrator do to enable backups to span multiple BasicDisk storage units?
- A . configure a storage unit group and add BasicDisk storage units from multiple Media Servers
- B . configure a storage unit group that consists only of disk storage units defined on a single Media Server
- C . confirm that a load balancing storage unit is selected at the group level
- D . select Storage Units > Storage Unit > Allow backup to span disks
An administrator has a media server with four empty disks with the following characteristics:
SSD1, SSD2: High-speed solid state drives
Disk3, Disk4: Medium-speed hard drives
What is the recommended disk storage configuration using these devices?
- A . place disks in one AdvancedDisk pool with media server load balancing configured
- B . place disks in one AdvancedDisk pool with round robin configured
- C . place disks in one AdvancedDisk pool with failover configured, in the order: SSD1, SSD2, Disk3, Disk4
- D . place disks in two AdvancedDisk pools: SSD1 and SSD2 in one pool, and Disk3 and Disk4 in the other pool
Which two methods should an administrator use to automate duplication in NetBackup? (Select two.)
- A . NetBackup Vault
- B . bpduplicate command
- C . OpsCenter
- D . Storage Lifecycle Policies
- E . OpenStorage API
A NetBackup environment with a single standalone LTO5 tape drive is experiencing slow performance when restoring a small number of files from a tape with multiplexed backup images.
What should the administrator do to improve restore performance for future backups?
- A . enable checkpoint restart
- B . disable multistreaming
- C . reduce fragment size
- D . disable tape compression
What is required to implement Auto Image Replication?
- A . BasicDisk or AdvancedDisk storage units and at least one Master Server
- B . OST-compliant appliances or MSDP and at least one Master Server
- C . OST-compliant appliances or MSDP and at least two Master Servers
- D . BasicDisk or AdvancedDisk storage units and at least two Master Servers
An administrator has a master server named master1.
When the administrator runs the bpclntcmd -pn command on the client, the administrator receives the following output:
What is a possible cause for this output?
- A . The host file needs to be changed on the master server.
- B . The client has lost connectivity to the master server.
- C . The SAN connection to the master server needs to be configured.
- D . The bp.conf of the client needs to be updated.
A BasicDisk storage unit is 500 GB and is running out of space. The disk and file system is resized to 800 GB.
What must occur to use this new disk space?
- A . initiate a backup operation to the BasicDisk storage unit
- B . run nbdevquery to refresh the disk inventory
- C . restart the Disk Manager (bpdm) process
- D . run bpstsinfo to update the high water mark
Which command should an administrator use to show a list of incomplete copies of lifecycle managed images?
- A . nbstl
- B . bpimmedia
- C . bpimage
- D . nbstlutil