The  following commands are configured on the  S3610  switch:

The  following commands are configured on the  S3610  switch:

qos map-table dotlp-ip

import 1 export4

import 2 export 5

interface Ethernet1/0/8

port link-mode bridge

port link-tpe trunk

port trunk permit vlan 1 4

qos trus t dotlp

interface Ethernet1/0/9

port link-mode bridge

port link-tpe trunk

port trunk permit vlan 1 4

qos gts an cir 65000 cbs 2000000

Then when the traffic is  40Mbps  , the packets with the  vlan id  of  4  and the  802.1p  priority are  1  , and the packets with the traffic of  40Mbps  with the  vlan id  of  4  and the  802.1p  priority of  2  enter at the same time from port  E 1/0/8  , When forwarding from port  E1/0/9  , which of the following statements is correct is  ____  .( Choose one or more )
A . 80Mbps  packets are forwarded normally
B . Packet traffic shaping is  65Mbps  for forwarding
C . Packets with  802.1p  priority  1  have packet loss on the outgoing port  E1/0/9
D . All packets with  802.1p  priority  1  are stored out of port  E1/0/9 and  forwarded
E . Packets with  802.1p  priority  2  have packet loss on outbound port  E1/0/9
F . All packets with  802.1p  priority  2  are forwarded on the outgoing port  E1/0/9
G . portions partial misconfigured

Answer:   BCF

Explanation:

Priority  2  has high priority and priority processing

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments