The  configuration commands on the  MSR  router are as follows  :

The  configuration commands on the  MSR  router are as follows  :

acl number 2000

rul e o permit source 192.168.0.0 0.0.0.255

acl number 2002

rule o permit source 192.168.2.0 0.0.0.255

#

traffic classifier 2 0perator and

if-match acl 2002

traffic classifier l operator and

if-match acl 2000

##

interface GigbitEthernet0/1

port link-mode route

duplex full

speed 10

ip address 192.168.1.1 255.255.255.0

qos reserved-bandwidth pct 90

qos appl polic test outbound

When the traffic rates of packets with source addresses of  192.168.0.2  ,  192.168.2.2  , and  192.168.3.2  are  4Mbps  ,  4Mbps  ,  5Mbps  , and no other background traffic is forwarded from port  G0/l  .

The incorrect statement under the team is  ____  .
A . The forwarding rate of packets with the source address of  192.168.0.2  is about  4Mbps
B . The forwarding rate of packets with the source address of  192.168.0.2  is about  3Mbps
C . The forwarding rate of packets with the source address of  192.168.0.2  is about  2.7Mbps
D . The forwarding rate of packets with the source address of  192.168.2.2  is about  4Mbps
E . The forwarding rate of packets with the source address of  192.168.2.2  is about  3Mbps
F . The forwarding rate of packets with the source address of  192.168.2.2  is about  2.7Mbps

Answer:   ABDE

Explanation:

Bandwidth  9M  ,  9*0.3=2.7M

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments