As an IP packet is routed across subnets, which value gets updated at each hop?
As an IP packet is routed across subnets, which value gets updated at each hop?A . destination MAC addressB . destination IP addressC . source IP addressD . subnet maskView AnswerAnswer: A
If a customer needs to implement VRRP-E on their ICX7550 units, which license needs to be applied to enable this feature?
If a customer needs to implement VRRP-E on their ICX7550 units, which license needs to be applied to enable this feature?A . PoDB . MACSecC . L3-BaseD . L3-premView AnswerAnswer: C
Which switch cannot exceed a maximum of 30W per port?
Which switch cannot exceed a maximum of 30W per port?A . ICX7650B . ICX7550C . ICX7150-48ZPD . ICX7150-C12PView AnswerAnswer: C
What are two features of Open Shortest Path First (OSPF)? (Choose two.)
What are two features of Open Shortest Path First (OSPF)? (Choose two.)A . utilizes distance vectorB . calculates link costC . automatic redistribution of routesD . updates routes dynamicallyE . uses exterior gateway protocolsView AnswerAnswer: A, D
Which ICX switch would fit these requirements?
A customer required an access switch with a Power over Ethernet (PoE) budget not to exceed 240W. They also require the switch to make no fan noise. Which ICX switch would fit these requirements?A . ICX7150-C12PB . ICX7150-24PC . ICX7150-48PD . ICX7150-C10ZPView AnswerAnswer: B
Which link will remain in a forwarding state on both sides?
The root bridge is connected to another switch over two independent 10Gbe links. Which link will remain in a forwarding state on both sides?A . the link with the lowest port number on the non-root switchB . the link with the lowest port number on the root switchC . the...
What is the correct configuration?
A Wi-Fi access point is configured for management traffic on the default VLAN and a guest SSID on VLAN 10. The access point is connected to port 1/1/10. What is the correct configuration? A) vlan 1 no tagged ethernet 1/1/10 ! vlan 10 untagged ethernet 1/1/10 B) vlan 1 no...
What are two differences between Class of Service (CoS) and Differentiated Services Code Point (DSCP)? (Choose two.)
What are two differences between Class of Service (CoS) and Differentiated Services Code Point (DSCP)? (Choose two.)A . DSCP defines priority levels and CoS manipulates traffic according to these defined priority levels.B . CoS defines priority levels and DSCP manipulates traffic according to these defined priority levels.C . DSCP operates...
What is the highest Power over Ethernet (PoE) power class supported by 802.3bt?
What is the highest Power over Ethernet (PoE) power class supported by 802.3bt?A . 8B . 4C . 1D . 16View AnswerAnswer: A
Which ICX model can run silently in fanless mode?
Which ICX model can run silently in fanless mode?A . ICX7150-48PFB . ICX7150-48PC . ICX7550-24PD . ICX7150-48ZPView AnswerAnswer: B