- All Exams Instant Download
In AOS 10. which session-based ACL below will only allow ping from any wired station to wireless clients but will not allow ping from wireless clients to wired stations"? The wired host ingress traffic arrives on a trusted port.
In AOS 10. which session-based ACL below will only allow ping from any wired station to wireless clients but will not allow ping from wireless clients to wired stations"? The wired host ingress traffic arrives on a trusted port. A. ip access-list session pingFromWired any user any permit B. ip...
Which feature supported by SNMPv3 provides an advantage over SNMPv2c?
Which feature supported by SNMPv3 provides an advantage over SNMPv2c?A . Transport mappingB . Community stringsC . GetBulkD . EncryptionView AnswerAnswer: D Explanation: Encryption is a feature supported by SNMPv3 that provides an advantage over SNMPv2c. Encryption protects the confidentiality and integrity of SNMP messages by encrypting them with a...
You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration How should you establish the keepalive connection?
You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration How should you establish the keepalive connection?A . SVI, VLAN trunk allowed all on ISL in default VRFB . routed port in custom VRFC . loopback 0 and OSPF area 0 in default VRFD...
What is an OSPF transit network?
What is an OSPF transit network? A. a network that uses tunnels to connect two areas B. a special network that connects two different areas C. a network on which a router discovers at least one neighbor D. a network that connects to a different routing protocolView AnswerAnswer: C Explanation:...
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device.
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device. The following configuration was created on the switch: A) B) C) D) A . Option AB . Option BC . Option CD . Option DView AnswerAnswer: C Explanation: The correct configuration...
What is the correct configuration to ensure that APs will work properly?
A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled. The VLANs are already...
What is the benefit of VSX clustering with the new solution?
The customer needs a network hardware refresh to replace an aging Aruba 5406R core switch pair using spanning tree configuration with Aruba CX 8360-32YC switches. What is the benefit of VSX clustering with the new solution?A . stacked data-plane B. faster MSTP converge processing C. dual Aruba AP LAN port...
What is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports?
What is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports?A . Implement a control plane ACL to limit access to approved IPs and/or subnets B. Manually enable Enhanced Security Mode from a console session. C. Disable all management services...
What is the solution for this?
A customer is using stacked Aruba CX 6200 and CX 6300 switches for access and a VSX pair of Aruba CX 8325 as a collapsed core 802 1X is implemented for authentication. Due to the lack of cabling, some unmanaged switches are still in use Sometimes devices behind these switches...
What is correct about access from the servers to the Core?
Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where servers attach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been...
