HPE6-A72 exam

You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch. What command could you have issued before making changes that would have recovered the original...

What is the binary conversion of the hexadecimal value 0x2001?A . 0010 0001B . 0002 0000 0000 0001C . 0011 0000 0000 0001D . 0010 0000 0000 0001View AnswerAnswer: D

What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?A . backup secondary sftp://[email protected]/GB . 10.04.0003.swiC . copy secondary sftp://[email protected]/GD . 10.04.0003.swiE . copy sftp://[email protected]/GF . 10.04.0003.swi secondaryG . copy secondary tftp://[email protected]/GH . 10.04.0003.swiView AnswerAnswer: B

The section in blue can be ignored. SW1(config)# interface 1/1/1-1/1/2 SW1(config-if-<1/1/1-1/1/2)# vlan access 2 SW1(config-if-<1/1/1-1/1/2)# exit SW1(config)# interface 1/1/11-1/1/17 SW1(config-if-<1/1/11-1/1/17)# vlan access 17 SW1(config-if-<1/1/11-1/1/17)# exit After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added? A . Option AB...

Refer to the exhibit. You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master. What is a valid configuration for Access-2 to join the VSF stack?A . Access-2# configure Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2...

What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)A . Management interface split detectionB . Peer switch-based detectionC . Loopback keepalivesD . ARP-basedE . BFDView AnswerAnswer: A,D

Which security benefit does SNMPv3 offer that SNMPv2 does not offer?A . SSL encryptionB . ScopesC . Data confidentiallyD . RADIUS groupsView AnswerAnswer: C

Refer to the exhibit. Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN. Which configuration will correct the issue?A . Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181B . Core-1(config)# ip route...

DRAG DROP Match the term to the correct description. View AnswerAnswer:

Refer to the exhibit. The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?A . The command pageB . The command terminal length 30C . The command moreD . The command...