- All Exams Instant Download
Among the SNMPv1 messages, the messages sent by the Agent to the NMS include:
Among the SNMPv1 messages, the messages sent by the Agent to the NMS include:A . GetRequestB . GetNextRequestC . SetRequestD . GetResponseE . TrapView AnswerAnswer: DE
The host PCA, PCB and PCC are respectively connected to the GigabitEthernet1/0/1 GigabitEthernet1/0/2 and GigabitEthernet1/0/3 ports of the switch SWA, and the host addresses are in the same network segment. If you want to realize that both PCA and PCB can access PCC , But PCA and PCB are isolated from each other. Which of the following technologies or methods can meet customer needs
The host PCA, PCB and PCC are respectively connected to the GigabitEthernet1/0/1 GigabitEthernet1/0/2 and GigabitEthernet1/0/3 ports of the switch SWA, and the host addresses are in the same network segment. If you want to realize that both PCA and PCB can access PCC , But PCA and PCB are isolated...
The host PCA, PCB and PCC are respectively connected to the GigabitEthernet1/0/1 port of the switch SWA □ UP, Ethernet1/0/2 and Ethernet1/0/3 ports, and their addresses are in the same network segment, i exchange & SWA are configured
The host PCA, PCB and PCC are respectively connected to the GigabitEthernet1/0/1 port of the switch SWA □ UP, Ethernet1/0/2 and Ethernet1/0/3 ports, and their addresses are in the same network segment, i exchange & SWA are configured [SWA]vlan 10 [SWA-vlan10]port ethernet 1/0/1 [SWA-vlan10]quit [SWA]vlan 20 [SWA-vlan20]port ethernet 1/0/2 [SWA-vlan20]quit...
Which of the following descriptions about H3C switch static routing is correct (choose one or more)
Which of the following descriptions about H3C switch static routing is correct (choose one or more)A . Layer 2 switches do not support routing and forwarding, so Layer 2 switches cannot be configured with static routesB . Layer 2 switches can be configured with static routesC . Only Layer 3...
The core goal of highly reliable redundant network design is
The core goal of highly reliable redundant network design isA . Maximize network bandwidthB . Maximize network access securityC . Minimize the existence of a single point of failure in the networkD . Minimize network management complexityView AnswerAnswer: C
What is correct about the interoperability between Sub VLANs in SuperVLAN technology?
What is correct about the interoperability between Sub VLANs in SuperVLAN technology?A . Host IP addresses in different SubVLANs belong to the same network segment, and they can communicate directly with each other through Layer 2 forwardingB . Host IP addresses in different SubVLANs belong to the same network segment,...
Which of the following elements may the MAC address table entry of the switch contain?
Which of the following elements may the MAC address table entry of the switch contain?A . MAC addressB . Port numberC . VLANIDD . Aging timeE . IP addressView AnswerAnswer: ABCD
In the network shown in the figure, the switch SWA is a two-layer switch, and the router RTA is the gateway of each PC. The following configuration is made on the router RTA:
In the network shown in the figure, the switch SWA is a two-layer switch, and the router RTA is the gateway of each PC. The following configuration is made on the router RTA: [RTA]interface Ethernet 0/0.1 [RTA-Ethernet0/0.1]ip address 10.10.10.1 255.255.255.0 [RTA-EthernetO/0.1 ]vlan-type dotlq vid 1 [RTA-Ethernet0/0.1 Jinterface ethernet 0/0.2 [RTA-Ethernet0/0.2]ip...
In the switching network as shown in the figure, VLAN10 is set as Isolate-user-vlan on switch SWA, VLAN2 and VLAN3 are set as Secondary VLAN of VLAN 10; VLAN2-VLAN20 is created on switch SWB, and VLAN20 is set as Isolate-user-vlan , VLAN4 is the Secondary VLAN of VLAN20. After setting the IP address of each device as shown in the figure, the local proxy ARP function is enabled on both SWA and SWB. Initially, the switch and pc did not learn their corresponding ARP entries. In the process of PCA ping PCB, PCA will send an ARP request. After receiving the ARP request message, the PCA will send the destination MAC response. The destination MAC address is
In the switching network as shown in the figure, VLAN10 is set as Isolate-user-vlan on switch SWA, VLAN2 and VLAN3 are set as Secondary VLAN of VLAN 10; VLAN2-VLAN20 is created on switch SWB, and VLAN20 is set as Isolate-user-vlan , VLAN4 is the Secondary VLAN of VLAN20. After setting...
If port-based VLAN, MAC address-based VLAN, protocol-based VLAN, and IP subnet-based VLAN are simultaneously enabled on a port of the switch, by default, VLANs will be matched in order
If port-based VLAN, MAC address-based VLAN, protocol-based VLAN, and IP subnet-based VLAN are simultaneously enabled on a port of the switch, by default, VLANs will be matched in orderA . Port VLAN MACVLAN Protocol VLAN IP Subnet VLANB . Port VLAN IP Subnet VLAN Port VLAN MAC VLANC . MACVLAN...
