- All Exams Instant Download
If preempt is disabled, which switch is expected to be the Primary?
A group of four switches are configured to be part of a VRRP group with the following configurations: - Switch1: IP 192.168.10.11, Priority 11 - Switch2: IP 192.168.10.12, Priority 12 - Switch3: IP 192.168.10.13, Priority 13 - Switch4: IP 192.168.10.14, Priority 14 The switches are initially disconnected from the network...
What is the maximum number of dynamic MAC addresses that can be learned on a Dell EMC N-Series switchport that is configured for dynamic locking?
What is the maximum number of dynamic MAC addresses that can be learned on a Dell EMC N-Series switchport that is configured for dynamic locking?A . 100B . 300C . 400D . 600View AnswerAnswer: A
What allows an administrator to specify a list of host MAC addresses that are allowed on a port?
A network administrator wants to lock down network access using port security. What allows an administrator to specify a list of host MAC addresses that are allowed on a port?A . Static lockingB . Sticky modeC . Switchport modeD . Dynamic lockingView AnswerAnswer: A
Which OSPF packet type is sent to the neighbor when LSDB difference is detected?
Which OSPF packet type is sent to the neighbor when LSDB difference is detected?A . HelloB . LSRC . LSAckD . LSUView AnswerAnswer: B
Which Dell OS6 command displays the IPv6 address of the default gateway and the default route associated with the gateway?
Which Dell OS6 command displays the IPv6 address of the default gateway and the default route associated with the gateway?A . show ip routeB . show ipv6 routeC . show ip mrouteD . show ipv6 briefView AnswerAnswer: B
Which command will show the policy-based routing map applied on an interface?
Which command will show the policy-based routing map applied on an interface?A . show ip access-listsB . show route-mapC . show ip policyD . show ip interfaceView AnswerAnswer: C
When configuring a Dell EMC N-Series switch for voice traffic, which settings are needed?
When configuring a Dell EMC N-Series switch for voice traffic, which settings are needed?A . Enable voice VLAN Set each-interface to LLDP share all VoIP related parameters Set switchport mode to generalB . Create a VLAN for voice Set each interface to ISDP share all VoIP related parameters Set switchport...
Which protection is provided by the spanning tree root guard feature enabled on a switch port?
Which protection is provided by the spanning tree root guard feature enabled on a switch port?A . Advertises the switch as the spanning tree rootB . Forces the port to become the spanning tree root portC . Filters all inferior BPDUs received on the portD . Moves the port to...
What is the PoE source maximum power budget for a Class 3 end device?
What is the PoE source maximum power budget for a Class 3 end device?A . 12.95 wattsB . 60 wattsC . 30 wattsD . 15.4 wattsView AnswerAnswer: D
Which port number will be blocked by spanning tree?
The exhibit represents a topology with all Dell EMC N4000 Series switches with RSTP enabled. In addition, the switches are using the default configuration on all ports and protocols. Which port number will be blocked by spanning tree?A . Te 1/0/3B . Te 1/0/4C . Te 1/0/5D . Te 1/0/6View...
