- All Exams Instant Download
When implementing Cisco MPLS TE, the constrained-based path calculations will use which value as the TE cost of each link within the MPLS domain?
When implementing Cisco MPLS TE, the constrained-based path calculations will use which value as the TE cost of each link within the MPLS domain?A . By default, it will use the IGP metric, or each link can be assigned a specific value using the admin-weight command.B . It can only...
Which Cisco IOS XR command should be used to identify if MPLS TE FRR is enabled?
Which Cisco IOS XR command should be used to identify if MPLS TE FRR is enabled?A . show mpls traffic-eng tunnel <tunnel#>B . show mpls frrC . show mpls traffic-eng protectionD . show mpls protectionE . show mpls fast-rerouteView AnswerAnswer: A
When implementing MPLS DS-TE on Cisco IOS XR routers, all aggregate Cisco MPLS TE traffic is mapped to which class type by default?
When implementing MPLS DS-TE on Cisco IOS XR routers, all aggregate Cisco MPLS TE traffic is mapped to which class type by default?A . class-type 0 (bandwidth global pool)B . class-type 1 (bandwidth subpool)C . class-type 2 (bandwidth priority)D . class type class-default (bandwidth best-effort)View AnswerAnswer: A
On PE7 which statement is correct regarding the "traffic-policing" policy-map?
Scenario: On PE7 which statement is correct regarding the "traffic-policing" policy-map?A . The "traffic-policing" QoS policy is applied to the Gi0/0/0/0 interface in the outbound direction.B . The "traffic-policing" QoS policy will police the traffic matched by the "test12" ACL to 3 mbps and will drop all exceeding traffic.C ....
What is an important requirement with MPLS applications like Layer 3 MPLS VPNs?
What is an important requirement with MPLS applications like Layer 3 MPLS VPNs?A . All the PE routers loopback addresses should be summarized to reduce the number of routing table entries in the core routers.B . Targeted hellos are required between all the PE routers.C . An end-to-end LSP is...
Which field in the MPLS shim header is used to support different QoS markings?
Which field in the MPLS shim header is used to support different QoS markings?A . IP precedenceB . DSCPC . EXPD . ToSE . SF . LabelView AnswerAnswer: C
On the Cisco IOS XR, which MQC configuration is different than on the Cisco IOS and IOS XE?
On the Cisco IOS XR, which MQC configuration is different than on the Cisco IOS and IOS XE?A . On the Cisco IOS XR, WRED can only be applied in the output direction.B . On the Cisco IOS XR, marking can only be applied in the input direction.C . On...
A DSCP value of 41 in decimal corresponds to which IP precedence value?
A DSCP value of 41 in decimal corresponds to which IP precedence value?A . 3 C FlashB . 4 C Flash OverrideC . 5 C CriticalD . 6 C Internet ControlE . 7 C Network ControlView AnswerAnswer: C
Please Answer Questions Follow The Prompts Below
DRAG DROP View AnswerAnswer:
When implementing MPLS TE tunnels on Cisco IOS XR routers, what is the tunnel setup and hold priority value range, and which value has the highest priority?
When implementing MPLS TE tunnels on Cisco IOS XR routers, what is the tunnel setup and hold priority value range, and which value has the highest priority?A . 0-63, where 0 is the highest priorityB . 0-63, where 63 is the highest priorityC . 0-7, where 0 is the highest...
