What is a feature of NFS?

What is a feature of NFS?A . role-based access control B. Kerberos-based security model C. block-based file access D. zone-based access controlView AnswerAnswer: B Explanation: https://www.cisco.com/c/en/us/support/docs/security-vpn/kerberos/16087-1.html#modifiednfs

September 6, 2022 No Comments READ MORE +

Which server policy is used to install new Cisco IMC software on a server?

Which server policy is used to install new Cisco IMC software on a server?A . host firmware policy B. hypervisor firmware policy C. BIOS software policy D. Cisco IMC software policyView AnswerAnswer: A Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_01.html# You can use host firmware packages by defining a host firmware policy as an attribute...

September 6, 2022 No Comments READ MORE +

Which configuration must be applied to both Nexus switches to meet these requirements?

An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1...

September 6, 2022 No Comments READ MORE +

Which server policy is used to install new Cisco IMC software on a server?

Which server policy is used to install new Cisco IMC software on a server?A . host firmware policy B. hypervisor firmware policy C. BIOS software policy D. Cisco IMC software policyView AnswerAnswer: A Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_01.html# You can use host firmware packages by defining a host firmware policy as an attribute...

September 5, 2022 No Comments READ MORE +

Which command sequence must be used to accomplish this goal?

An engineer must configure HTTPS secure management for Cisco UCS Manager using a key ring named kr2016 and a key size of 1024 bits. The environment consists of a primary fabric interconnect named UCS-A and a secondary fabric interconnect named UCS-B. Which command sequence must be used to accomplish this...

September 5, 2022 No Comments READ MORE +

Copy backup-config from the backup server to the running-config file

Copy backup-config from the backup server to the running-config fileView AnswerAnswer: D Explanation: TFTP is the only protocol that uses UDP. FTP, SFTP, and SCP use TCP.

September 5, 2022 No Comments READ MORE +

Which configuration implements the traffic capture that meets the requirements?

Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements? A . Option A B. Option B...

September 4, 2022 No Comments READ MORE +

A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches

DRAG DROP A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches. Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right. View AnswerAnswer: Explanation: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/security/cisco_mds9000_security_config_guide_8x/configuring_users_and_common_roles.html#con_1422305

September 4, 2022 No Comments READ MORE +

What are two types of FC/FCoE oversubscription ratios? (Choose two.)

What are two types of FC/FCoE oversubscription ratios? (Choose two.)A . server storage to end-node count B. port bandwidth to uplink bandwidth C. edge ISL bandwidth to core ISL bandwidth D. host bandwidth to storage bandwidth E. switch processing power to end-node processing powerView AnswerAnswer: C, D Explanation: https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/BRKDCN-1121.pdf https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/n5k_fcoe_ops.html

September 4, 2022 No Comments READ MORE +

Which action must be taken before the maintenance policy can be committed?

Refer to the exhibit. Which action must be taken before the maintenance policy can be committed?A . Set the soft shutdown timer to a specific time. B. Associate a service profile to the maintenance policy. C. Set the policy to apply the change on the next reboot. D. Specify a...

September 4, 2022 No Comments READ MORE +