- All Exams Instant Download
Which solution meets these requirements?
An engineer must design a multitenant solution using Cisco 7709 switches. The solution must support separate routing instances, separate spanning tree domains, and separate firewalls for each tenant. Which solution meets these requirements?A . CFS B. VDC C. vPC D. VRFView AnswerAnswer: B
Which Cisco Nexus feature must be used?
An engineer must logically partition two Cisco Nexus 7000 Series Switches into two environments called Test_39919596 and Production_59423879. The environments must use only F2-Series line cards and be limited to a maximum of 265 port-channels. Which Cisco Nexus feature must be used?A . vPC B. VDC C. vFC D. VRFView...
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right
DRAG DROP Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right. View AnswerAnswer: Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/creating-vdc.html
Drag and drop the configurations from the left onto the correct policies on the right
DRAG DROP Drag and drop the configurations from the left onto the correct policies on the right. View AnswerAnswer: Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/configuring_network_related_policies.html#task_7F03A03C719A4A44B8ACFAD73AADC73C
Where does Cisco UCS handle Fibre Channel traffic failover?
Where does Cisco UCS handle Fibre Channel traffic failover?A . on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching modeB . on the host, by using multipathing softwareC . in the hardware on the Cisco UCS VIC 12xx adapter or laterD . in the hardware on any Cisco...
What is the minimum MTU QoS requirement for the FCoE to work?
Refer to the exhibit. The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?A . 9000 bytesB . 2000 bytesC . 2158 bytesD . 2240 bytesView AnswerAnswer: C Explanation: This policy map shows a wrong MTU config. Check...
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?
Which protocol prevents fiber failures from causing a Layer 2 loop in a dark fiber DCI?A . BFDB . UDLDC . MCPD . LLDPView AnswerAnswer: B
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?A . Embedded RPB . Phantom RPC . MSDPD . PIM anycast RPView AnswerAnswer: B Explanation: Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-multicast/whitepaper_c11-508498.html
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right
DRAG DROP A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right. View AnswerAnswer: Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1238898
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?A . BGP ECMPB . Layer 4 to Layer 7 device packageC . inline load-balancing deviceD . ITDView AnswerAnswer: B Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0110.html
