- All Exams Instant Download
Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched SSID is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired...
Which RRC template should the engineer use?
An engineer has configured Media Stream on the WLC and must guarantee at least 2 Mbps stream per user. Which RRC template should the engineer use?A . coarse B. medium C. low D. ordinaryView AnswerAnswer: B Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/ b_cg74_CONSOLIDATED_chapter_0101010.html
Which configuration allows the devices to communicate over NMSP?
A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC. Which configuration allows the devices to communicate over NMSP?A . Allow UDP/16113 port on the central switch. B. Allow TCP/16113 port...
Which feature must be enabled toguarantee delivery?
An engineer has been hired to implement a way for users to stream video content without having issues on the wireless network. To accomplish this goal, the engineer must set up a reliable way for a Media Stream to work between Cisco FlexConnect APs. Which feature must be enabled toguarantee...
Which type of multicast routing should be implemented?
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?A . Protocol Independent Multicast Dense Mode B. Source Specific Multicast C. Multicast Source Discovery Protocol...
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?A . config flexconnectBranchA-FCG vlan 30 add B. config flexconnectBranchA-FCG vlan add 30 C. config flexconnect group BranchA-FCG vlan 30 add D. config flexconnect group BranchA-FCG vlan add 30View...
When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?A ....
Which configuration should be used to accomplish this goal?
A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and...
Which configuration must be performed?
An IT administrator is managing a wireless network in which most devices are Apple iOS. A QoS issue must be addressed on the WLANs. Which configuration must be performed?A . Enable Fastlane globally under Wireless > Access Points > Global Configuration. B. Create a new AVC Profile named AUTOQOS-AVC-PROFILE and...
Which AP mode and submode must be implemented?
An engineer must implement intrusion protection on the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which AP mode and submode must be implemented?A . AP mode: local, AP submode: none B. AP mode: monitor, AP...
