- All Exams Instant Download
Which setting on Cisco CMX allows the engineer to view the tags?
An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?A . Enable hyper location services for...
Which cause of this issue is true?
An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted....
Which traffic must be allowed on the firewall to ensure that the MSE and WLC can communicate using NMSP?
An engineer just added anew MSE to Cisco Prime Infrastructure and wants to synchronize the MSE with the Cisco 5520 WLC, which is located behind a firewall in a DMZ. It is noticed that NMSP messages are failing between the two devices. Which traffic must be allowed on the firewall...
Which configuration is required in the network?
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?A ....
Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and...
Which selection must be made from the direction drop-down list?
Refer to the exhibit. An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?A . It must be Inbound because traffic goes to the WLC . Packet direction has no significance; it is always Any.D ....
Which configuration on the WLC will accomplish this?
An engineer must create an account to log in to the CLI of an access point for troubleshooting. Which configuration on the WLC will accomplish this?A . ReadWrite User Access ModeB . Global Configuration Enable PasswordC . SNMP V3 UserD . Allow New Telnet SessionsView AnswerAnswer: B Explanation: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01101011.html
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port? A) B) C) D) A . Option AB . Option BC . Option CD . Option DView AnswerAnswer: D Explanation: Note: To enable Local switching, you...
Which type of multicast routing should be implemented?
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?A . Protocol Independent Multicast Dense ModeB . Source Specific MulticastC . Multicast Source Discovery ProtocolD...
What must be configured to permit only admins to have access?
The security learn is concerned about the access to all network devices, including the Cisco WLC. To permit only the admin subnet to have access to management, a CPU ACL is created and applied. However, guest users cannot get to the web portal. What must be configured to permit only...
