- All Exams Instant Download
Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched SSID is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired...
Which configuration change resolves this issue?
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair...
Which configuration is required in the network?
An engineer wants the wireless voice traffic class of service to be used to determine the queue order for packets received, and then have the differentiated services code point set to match when it is resent to another port on the switch. Which configuration is required in the network?A ....
Which solution must be used to address this issue?
An organization is supporting remote workers in different locations. In order to provide wireless network connectivity and services, OfficeExtend has been implemented. The wireless connectivity is working, but users report losing connectivity to their local network printers. Which solution must be used to address this issue?A . OEAP gateway override...
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?A . Policy Profile B. AP Join Profile C. Flex Profile D. RF ProfileView AnswerAnswer: B Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/cisco-hyperlocation.html
Which action is needed to complete this configuration?
An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode, WLAN A works but WLAN B does not. When converting APs to local mode, WLAN B works, but WLAN A does not. Which action is needed to complete this configuration?A . Create...
Which AP mode and submode must be implemented?
An engineer must implement intrusion protection on the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which AP mode and submode must be implemented?A . AP mode: local, AP submode: none B. AP mode: monitor, AP...
Which command should be used to reconcile this?
An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address. Which command should be used to reconcile...
How should the CAPWAP multicast group address be assigned during configuration?
An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients. How should the CAPWAP multicast group address be assigned during configuration?A . Each WLC must be assigned a unique multicast group address. B. Each WLC management address must...
Which method does the angle of arrival use to determine the location of a wireless device?
A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?A . received signal strength B. triangulation C. time distance of arrival D. angle of incidenceView AnswerAnswer: D Explanation: Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS-DG/wifich2.html
