- All Exams Instant Download
Which type of multicast routing should be implemented?
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?A . Protocol Independent Multicast Dense Mode B. Source Specific Multicast C. Multicast Source Discovery Protocol...
When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?A ....
Which feature meets these requirements?
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote...
What actions should be taken to resolve this issue?
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this...
Which switch configuration feature must be enabled?
A network engineer is deploying 8865 IP phones with wireless clients connected to them. In order to apply the appropriate QoS, the IP voice traffic needs to be distinguished from client data traffic. Which switch configuration feature must be enabled?A . Voice VLAN B. QBSS C. WME D. QoS routingView...
What is required to use Cisco CMX Location Analytics?
An engineer is managing a wireless network for a shopping center. The network includes a Cisco WLC, a Cisco MSE, and a Cisco Prime Infrastructure. What is required to use Cisco CMX Location Analytics?A . Enable tracking parameters in Cisco MSE. B. Enable Context Aware and CMX Browser Engage. C....
What must be implemented to accomplish this task?
An enterprise started using WebEx as a virtual meeting solution. There is a concern that the existing wireless network will not be able to support the increased amount of traffic as a result of using WebEx. An engineer needs to remark the QoS value for this application to ensure high...
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?A . RF Profile B. Flex Profile C. Policy Profile D. AP Join ProfileView AnswerAnswer: B
Which address provides automatic discovery of the best RP for each multicast group?
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?A . 224.0.0.13 B. 224.0.0.14 C. 224.0.1.39 D. 224.0.1.40View AnswerAnswer: D
What must be selected on the CMX server settings?
A shopping center uses AireOS controllers with Cisco Wave 2 APs. A separate WLAN named Guest-012345678-WLAN is used for guest wireless clients. Management needs location analytics to determine popular areas. CMX must track only associated clients. What must be selected on the CMX server settings?A . Exclude probing clients B....
