- All Exams Instant Download
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?A . UDP 16666 for control plane, EoIP (IP protocol 97) for data planeB . UDP 16668 for control plane, UDP 16667 for data planeC . UDP 16667 for control plane, UDP 16666 for data planeD...
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?A . UDP 16666 for control plane, EoIP (IP protocol 97) for data planeB . UDP 16668 for control plane, UDP 16667 for data planeC . UDP 16667 for control plane, UDP 16666 for data planeD...
Which traffic flow must be allowed at the firewall to enable the communication?
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?A . UDP port 16666B . IP protocol...
Which dBm range is the network inspected against?
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?A . -75 to -67 dBmB . -72 to -65 dBmC . -85 to -65 dBmD . -85 to -67 dBmView...
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?A . in the aisleB . under the seatC . above the stageD . under the stageView AnswerAnswer: B
Which section must the consultant check before replacing the old APs with APs that are IEEE 802.11ac-capable?
A wireless network consultant must assess an existing wireless LAN controller. Which section must the consultant check before replacing the old APs with APs that are IEEE 802.11ac-capable?A . number of AP licensesB . controller PSUC . throughput capacityD . software versionView AnswerAnswer: A
Which statement does the engineer respond with?
A customer asks an engineer to explain the concept of mobility domains and mobility groups. Which statement does the engineer respond with?A . A mobility group does not constrain the distribution of security context of a client and also does not constrain AP fail-over between controllers when the WLC are...
Which power design should the engineer use?
An engineer is designing the physical infrastructure for an IEEE 802.11ac network. Which power design should the engineer use?A . 802.3at PoE+ portsB . inline PoE portsC . 802.3af PoE portsD . 802.3af PoE injectorsView AnswerAnswer: C
Which scenario explains the client roaming behavior?
Refer to the exhibit. A client roams between two APs that are registered to two different controllers, where each controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client roaming behavior?A . Controllers exchange mobility control messages (over UDP port 16666) and...
When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?A . the client that has the highest RF propertiesB . the client that is...
