- All Exams Instant Download
Which two actions provide maximum support of Cisco 3800 Series access points?
An engineer must perform an assessment of a customer LAN for a future IEEE 802.11ac Wave 2 wireless deployment All access switches are Fast Ethernet-Capable only, and the wired infrastructure between existing APs and access switches is based on the CAT 6A standard. Which two actions provide maximum support of...
Which rule must the engineer follows to ensure proper roaming?
An engineer must configure the virtual IP address on multiple controllers in a mobility group. Which rule must the engineer follows to ensure proper roaming?A . Ensure that the DNS entry is tied to the virtual IP address of the WLC . Use a unique IP address for each WLE...
Which Cisco measurement recommendation should be considered?
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?A . The edge of the cell should be -67 dBm.B . The edge of the cell should be below 35 RSSD . The measurement should be done on the 2.4-GHz band.E...
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
Refer to the exhibit. What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?A . aestheticsB . transmit power considerationsC . antenna gainD . power supply considerationsView AnswerAnswer: B Explanation: https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html #wp1000551
Which design approach creates the desired result?
A customer celled with a requirement that internal clients must be on different subnets depending on the building they are in, AH access points are operating in local mode and will not be modified, and this is a single controller solution. Which design approach creates the desired result?A . Create...
Which operating mode is configured for a Cisco CleanAIR AP?
An engineer performs a Layer 1 survey by using Metegeek chanalyzer only on the current operating channel. Which operating mode is configured for a Cisco CleanAIR AP?A . LocalB . SnifferC . MonitorD . SE-connectView AnswerAnswer: A
How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?A . up to 20...
Which level of encryption does the backhaul link use?
A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?A . hashB . AESC . WEPD . 3DESView AnswerAnswer: B
What should the engineer use to identify the source of the Interference?
During a post-deployment site Survey, issues are found with non wi-Fi interference. What should the engineer use to identify the source of the Interference?A . Network analysis moduleB . Wireless intrusion preventionC . WiresharkD . Cisco spectrum expertView AnswerAnswer: D
By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?A . controller with the most available AP free license capacityB...
