- All Exams Instant Download
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right
DRAG DROP Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right. View AnswerAnswer: Explanation: Reference: https://www.rogerperkin.co.uk/featured/route-distinguisher-vs-route-target/
Why is the remote NetFlow server failing to receive the NetFlow data?
Refer to the exhibit. Why is the remote NetFlow server failing to receive the NetFlow data?A . The flow exporter is configured but is not used.B . The flow monitor is applied in the wrong direction.C . The flow monitor is applied to the wrong interface.D . The destination of...
Which command allows the logging on the switch to show the time of the flap according to the clock on the device?
A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output currently does not show the time of the flap. Which command allows the logging on the switch to show the time of the flap according to the...
Which protocol does VRF-Lite support?
Which protocol does VRF-Lite support?A . IS-ISB . ODRC . EIGRPD . IGRPView AnswerAnswer: C
Which list defines the contents of an MPLS label?
Which list defines the contents of an MPLS label?A . 20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTLB . 32-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTLC . 20-bit label; 3-bit flow label; 1-bit bottom stack; 8-bit hop limitD . 32-bit label; 3-bit flow label; 1-bit...
Drag and drop the packet types from the left onto the correct descriptions on the right
DRAG DROP Drag and drop the packet types from the left onto the correct descriptions on the right. View AnswerAnswer: Explanation: Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network...
Which debug command is used to troubleshoot this issue?
Refer to the exhibit. An IP SLA was configured on router R1 that allows the default route to be modified in the event that Fa0/0 loses reachability with the router R3 Fa0/0 interface. The route has changed to flow through router R2. Which debug command is used to troubleshoot this...
What is the reason for this issue?
Refer to the exhibit. An engineer is trying to redistribute OSPF to BGP, but not all of the routes are redistributed. What is the reason for this issue?A . By default, only internal routes and external type 1 routes are redistributed into BGPB . Only classful networks are redistributed from...
Which configuration enabled the VRF that is labeled “Inet” on FastEthernet0/0?
Which configuration enabled the VRF that is labeled “Inet” on FastEthernet0/0?A . R1(config)# ip vrf Inet R1(config-vrf)#interface FastEthernet0/0 R1(config-if)#ip vrf forwarding InetB . R1(config)#router ospf 1 vrf Inet R1(config-router)#ip vrf forwarding FastEthernet0/0C . R1(config)#ip vrf Inet FastEthernet0/0D . R1(config)# ip vrf Inet R1(config-vrf)#ip vrf FastEthernet0/0View AnswerAnswer: A
Why is the image not uploading?
While working with software images, an engineer observes that Cisco DNA Center cannot upload its software image directly from the device. Why is the image not uploading?A . The device must be resynced to Cisco DNA Center.B . The software image for the device is in install mode.C . The...
