- All Exams Instant Download
Drag and drop the packet types from the left onto the correct descriptions on the right
DRAG DROP Drag and drop the packet types from the left onto the correct descriptions on the right. View AnswerAnswer: Explanation: Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network...
In which circumstance does the BGP neighbor remain in the idle condition?
Refer to the exhibit. In which circumstance does the BGP neighbor remain in the idle condition?A . if prefixes are not received from the BGP peer B. if prefixes reach the maximum limit C. if a prefix list is applied on the inbound direction D. if prefixes exceed the maximum...
What is the reason for this issue?
Refer to the exhibit. An engineer is trying to redistribute OSPF to BGP, but not all of the routes areredistributed. What is the reason for this issue?A . By default, only internal routes and external type 1 routes are redistributed into BGP B. Only classful networks are redistributed from OSPF...
Drag and drop the operations from the left onto the locations where the operations are performed on the right
DRAG DROP Drag and drop the operations from the left onto the locations where the operations are performed on the right. View AnswerAnswer: Explanation: Label Switch Router
Which list defines the contents of an MPLS label?
Which list defines the contents of an MPLS label?A . 20-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL B. 32-bit label; 3-bit traffic class; 1-bit bottom stack; 8-bit TTL C. 20-bit label; 3-bit flow label; 1-bit bottom stack; 8-bit hop limit D. 32-bit label; 3-bit flow label; 1-bit...
Which configuration enabled the VRF that is labeled “Inet” on FastEthernet0/0?
Which configuration enabled the VRF that is labeled “Inet” on FastEthernet0/0?A . R1(config)# ip vrf Inet R1(config-vrf)#interface FastEthernet0/0 R1(config-if)#ip vrf forwarding Inet B. R1(config)#router ospf 1 vrf Inet R1(config-router)#ip vrf forwarding FastEthernet0/0 C. R1(config)#ip vrf Inet FastEthernet0/0 D. R1(config)# ip vrf Inet R1(config-vrf)#ip vrf FastEthernet0/0View AnswerAnswer: A
Which subnet is redistributed from EIGRP to OSPF routing protocols?
Refer to the exhibit. Which subnet is redistributed from EIGRP to OSPF routing protocols?A . 10.2.2.0/24 B. 10.1.4.0/26 C. 10.1.2.0/24 D. 10.2.3.0/26View AnswerAnswer: A
Drag and drop the packet types from the left onto the correct descriptions on the right
DRAG DROP Drag and drop the packet types from the left onto the correct descriptions on the right. View AnswerAnswer: Explanation: Unlike legacy network technologies such as ISDN, Frame Relay, and ATM that defined separate data and control channels, IP carries all packets within a single pipe. Thus, IP network...
Which two actions are needed to allow the file to copy?
An engineer is trying to copy an IOS file from one router to another router by using TFTP. Which two actions are needed to allow the file to copy? (Choose two.)A . Copy the file to the destination router with the copy tftp: flash: command B. Enable the TFTP server...
Which command must be used in configuration mode to enable SSH on the device?
Refer to the exhibit. An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting. Which command must be used in configuration mode to enable SSH on the device?A . no ip ssh...
