- All Exams Instant Download
On Which device is the fault condition located?
Ticket 2 IP NAT TROUBLE TICKET STATEMENT: The implementation group has been using the test bed to do a ‘proof-of-concept’ that required both client 1 and client 2 to access the Web Server at 209.65.200.241. After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at...
Which command is used to check the SSH version?
Which command is used to check the SSH version?A . show ip sshB . show crypto key mypubkey rsaC . show ssh sessionsView AnswerAnswer: A Explanation: R1# show ip ssh Connection Version Encryption Username HMAC Server Hostkey IP Address Inbound: 1 SSH-2 3des-cbc Raymond hmac-sha1 ssh-dss 10.120.54.2 Outbound: 6 SSH-2...
Please Answer Questions Follow The Prompts Below
BGP sim View AnswerAnswer: R1 configuration Router>enable Router#show running-config show run on R1 can see the following configuration ―-output omitted―- router bgp 64520 network 172.16.1.1 mask 255.255.255.255 neighbor IBGP peer-group neighbor IBGP remote-as 64550 ----wrong AS neighbor IBGP update-source loopback0 neighbor 172.16.2.2 peer-group IBGP neighbor 172.16.3.3 peer-group IBGP neighbor 209.165.200.2...
The Fault Condition is related to which technology?
The Fault Condition is related to which technology?A . BGPB . NATC . IP NATD . IPv4 OSPF RoutingE . IPv4 OSPF RedistributionF . IPv6 OSPF RoutingG . IPv4 layer 3 securityView AnswerAnswer: C Explanation: Clients 1 and 2 belong in the 10.2.0.0 subnet, as if you observe the NAT...
What should be the next step after the problem is solved?
What should be the next step after the problem is solved?A . document itB . knowledge transferC . result analysisView AnswerAnswer: A Explanation: Cisco has broken this process into eight steps:
Fault Condition is related to which technology?
Fault Condition is related to which technology?A . BGPB . NTPC . IP NATD . IPv4 OSPF RoutingE . IPv4 OSPF RedistributionF . IPv6 OSPF RoutingG . IPv4 layer 3 securityView AnswerAnswer: D Explanation: The problem in this situation is with OSPF on router 1. It is missing the "ip...
Which action is next to be performed?
A problem is resolved for a network-related issue by using a troubleshooting methodology. Which action is next to be performed?A . doucument the solutionB . perform a knowledge transferC . create an action planeD . analyze the resultsView AnswerAnswer: A Explanation:
You have been asked by your customer to help resolve issues in their routed network. Their network engineer has deployed HSRP. On closer inspection HSRP doesn't appear to be operating properly and it appears there are other network problems as well. You are to provide solutions to all the network problems
HSRP Case You have been asked by your customer to help resolve issues in their routed network. Their network engineer has deployed HSRP. On closer inspection HSRP doesn't appear to be operating properly and it appears there are other network problems as well. You are to provide solutions to all...
What is the solution of the fault condition?
What is the solution of the fault condition?A . Under the interface Serial0/0/0 configuration enter the ip nat inside commandB . Under the interface Serial0/0/1 configuration enter the ip nat outside commandC . Under interface Serial0/0/1 delete the “ip nat inside” command and add the “ip nat outside” commandD ....
Which configuration setting or step will allow the firewall to get automatic application signature updates?
An administrator has configured the Palo Alto Networks NGFW’s management interface to connect to the internet through a dedicated path that does not traverse back through the NGFW itself. Which configuration setting or step will allow the firewall to get automatic application signature updates?A . A scheduler will need to...
