- All Exams Instant Download
Which configuration permits this traffic?
Refer to the exhibit. The loopback on R3 is advertised within OSPF and shows up in the RIB on R1. Pings to the loopback on R3 time out when sourced from the loopback on R1. Which configuration permits this traffic?A . R1(config)#ip access-list extended 100 R1(config-ext-nacl)#no 100B . R1(config)#ip access-list...
What should be the next step after the problem is solved?
What should be the next step after the problem is solved?A . document itB . knowledge transferC . result analysisView AnswerAnswer: A Explanation: Cisco has broken this process into eight steps:
Which root cause of the issue is true?
Refer to the exhibit. A remote office was recently connected to the main office by using a GRE tunnel. Path MTU Discovery (PMTUD) is enabled on the tunnel interface. End users at the remote office report having issues accessing a file sever in the main office. Attempts to use PMTUD...
Topology with three switches which are connected to each other via Gi0/0 & Gi0/1. All interfaces are configured in VLAN 100 and voice VLAN 101. Duplex mismatch between two switches (one interface in full duplex which the opposite interface in half duplex). Spanning tree is detecting a loop in the network, what is causing the loop.
Topology with three switches which are connected to each other via Gi0/0 & Gi0/1. All interfaces are configured in VLAN 100 and voice VLAN 101. Duplex mismatch between two switches (one interface in full duplex which the opposite interface in half duplex). Spanning tree is detecting a loop in the...
Why is it not reachable you need to choose the ACL?
A topology with three routers R1, R2 and R3 connected to each other and a list of ACL statements to choose. The question ask that R3 is not able to reach R2 loop back, Why is it not reachable you need to choose the ACL?View AnswerAnswer: 30 Deny tcp R3...
Which configuration context must be modified to accomplish this configuration?
Refer to the exhibit. The organization has implemented Management Plane Protection. Headquarters has decided that FTP needs to be enabled on all management ports. Which configuration context must be modified to accomplish this configuration?A . Policy-mapB . Control-plane hostC . Access-listD . Class-mapView AnswerAnswer: B
What should be the next step after the problem is solved?
What should be the next step after the problem is solved?A . document itB . knowledge transferC . result analysisView AnswerAnswer: A Explanation: Cisco has broken this process into eight steps:
On Which device is the fault condition located?
Ticket 2 IP NAT TROUBLE TICKET STATEMENT: The implementation group has been using the test bed to do a ‘proof-of-concept’ that required both client 1 and client 2 to access the Web Server at 209.65.200.241. After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at...
Examine the configuration on R5. Router R5 do not see any route entries learned from R4; what could be the issue?
Examine the configuration on R5. Router R5 do not see any route entries learned from R4; what could be the issue?A . HSRP issue between R5 and R4B . There is an OSPF issue between R5and R4C . There is a DHCP issue between R5 and R4D . The distribute-list...
