- All Exams Instant Download
What is the solution of the fault condition?
What is the solution of the fault condition?View AnswerAnswer: Under interface Serial0/0/0.12 delete the “ip nat outside” command and add the “ip nat inside” command
On which device is the fault condition located?
Ticket 3 R1ACL TROUBLE TICKET STATEMENT: The implementation group has been using the test bed to do a ‘proof-of-concept’ that required both client 1 and client 2 to access the Web Server at 209.65.200.241. After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble...
Identify which of the following is the issue preventing route entries being installed on R4 routing table?
Examine the configuration on R4. The routing table shows no entries for 172.16.10.0/24 and 172.16.20.0/24. Identify which of the following is the issue preventing route entries being installed on R4 routing table?A . HSRP issue between R4 and R2B . This is an OSPF issue between R4 and R2C ....
PMTUD (Path MTU Discovery) not working, what is the issue?
PMTUD (Path MTU Discovery) not working, what is the issue?A . Local router MTU is 1500B . Local router MTU is 1400C . Router in the path has “no ip host unreachable” configuredD . Router in path has ICMP Redicrects enabledView AnswerAnswer: C
What should be the next step after the problem is solved?
What should be the next step after the problem is solved?A . document itB . knowledge transferC . result analysisView AnswerAnswer: A Explanation: Cisco has broken this process into eight steps:
Fault Condition is related to which technology?
Fault Condition is related to which technology?A . BGPB . NTPC . IP NATD . IPv4 OSPF RoutingE . IPv4 OSPF RedistributionF . IPv6 OSPF RoutingG . IPv4 layer 3 securityView AnswerAnswer: D Explanation: The problem in this situation is with OSPF on router 1. It is missing the "ip...
What should be the next step after the problem is solved?
What should be the next step after the problem is solved?A . document itB . knowledge transferC . result analysisView AnswerAnswer: A Explanation: Cisco has broken this process into eight steps:
Something related to permit FTP in all management hosts
Something related to permit FTP in all management hostsA . Policy-mapB . Control-planeC . Access-listD . Class-mapView AnswerAnswer: B
What should be the next step after the problem is solved?
What should be the next step after the problem is solved?A . document itB . knowledge transferC . result analysisView AnswerAnswer: A Explanation: Cisco has broken this process into eight steps:
What changes need to occur so R1 can ping R3 loopback?
Loopback from R1 can’t ping loopback of R3 (192.168.254.1/24). An ACL is configured on R3 that only permits 192.168.0.0 0.0.0.255. What changes need to occur so R1 can ping R3 loopback?A . ip access-list extended 101 no 30 30 permit 192.168.0.0 0.0.0.255B . ip access-list extended 101 no 30 30...
