- All Exams Instant Download
Which RRM feature allows an access point to avoid non-IEEE 802.11 interference?
Which RRM feature allows an access point to avoid non-IEEE 802.11 interference?A . DCAB . TPCC . RF groupsD . coverage hole detectionView AnswerAnswer: A
With the current Cisco WLC version 7.0 syslog level settings set the way they are, which log levels are captured by the Syslog server?
Refer to the exhibit. With the current Cisco WLC version 7.0 syslog level settings set the way they are, which log levels are captured by the Syslog server?A . syslog level errors onlyB . all syslog levelsC . only the syslog severity level number of error and greaterD . only...
Which four options are the characteristics of the original 802.11 protocol? (Choose four.)
Which four options are the characteristics of the original 802.11 protocol? (Choose four.)A . Defined DSSS and FHSS as possible methods for modulationB . Designed to operate in the 5 GHz ISM frequency spectrumC . The most common deployment is three non-overlapping channels that are 20 MHz wideD . The...
What three categories of parameters are needed?
An engineer is adding a controller to a WCS. What three categories of parameters are needed? (Choose three.)A . IP parametersB . SNMP ParametersC . Mobility ParametersD . Telnet/SSH ParametersE . TFTP ParametersF . RADIUS ParametersView AnswerAnswer: A, B, D
Which Cisco WLC command family can help to troubleshoot communication between an AP and the WLC?
Which Cisco WLC command family can help to troubleshoot communication between an AP and the WLC?A . (Cisco Controller) >debug capwapB . (Cisco Controller) >debug apC . (Cisco Controller) >debug cacD . (Cisco Controller) >debug dot11View AnswerAnswer: A
When reading a radiation pattern for an antenna, at which two drops in signal and power is the beam width measured? (Choose two.)
When reading a radiation pattern for an antenna, at which two drops in signal and power is the beam width measured? (Choose two.)A . 3 dBB . 6 dBC . 9 dBD . 10 dBE . 1/2 powerF . 1/4 powerG . 1/8 powerH . 1/10 powerView AnswerAnswer: A, E
What is the most likely cause of this problem?
Tablets and other wireless clients are unable to connect at any 802.11 n data rates. What is the most likely cause of this problem?A . WLAN > General properties are incorrectly configured.B . WLAN > QoS properties are incorrectly configured.C . WLAN > Security properties are incorrectly configured.D . WLAN...
During which type of survey does the surveyor interact with the infrastructure?
During which type of survey does the surveyor interact with the infrastructure?A . planningB . activeC . passiveD . predictiveView AnswerAnswer: B
Which step does the AP take next?
An AP using version 8.0 broadcasts a Layer 3 CAPWAP discovery message on the local IP subnet. Which step does the AP take next?A . Send a discovery request using locally stored information on the AC . Determine if the controller responses include the primary controller.D . Send a discovery...
When Cisco AnyConnect modules are installed on a PC, which module must be installed first?
When Cisco AnyConnect modules are installed on a PC, which module must be installed first?A . telemetryB . web securityC . VPND . NAME . DARTF . postureG . CSSCView AnswerAnswer: C
