Which generic object do you use to import leave requests?
- A . External Time Data
- B . Employee Time Sheet
- C . External Time Record
- D . Employee Time
You have a total balance of 30 days at the beginning of January 2022. You take 10 days leave in December 2022.If you run the Time Account Snapshot report with March 31, 2022 as the end date, how many days are shown intaken and planned columns?
- A . Taken = 0, Planned = 10
- B . Taken = 0, Planned = 30
- C . Taken = 10, Planned = 30
- D . Taken = 10, Planned = 0
A customer requires their employee to change only the un-approved timesheets in the past 4 weeks.
What configuration is required to do this?
- A . Create Time Recording Admissibility and assignit in Job Information with the following settings: Set Past Weeks to 4. Set Amendment Allowed to No.
- B . Create Time Recording Admissibility and assign it in Time Recording Profile with the following settings: Set Past Weeks to 4. Set Amendment Allowed to Yes.
- C . Create Time Recording Admissibility and assign it in Time Recording Profile with the following settings: Set Past Weeks to 4. Set Amendment Allowed to No.
- D . Create Time Recording Admissibility and assign it in Job Information with the following settings: Set Past Weeks to 4. Set Amendment Allowed to Yes.
For a Time Tracking-enabled customer, what Time Record Filter capability is available for a Cross- Midnight scenario?
- A . Holiday Class Filter for only Current Day and Previous Day
- B . Holiday Class Filter for only Current Day
- C . Holiday Class Filter for only Current Day and Next Day
- D . Holiday Class Filter for Current Day, Previous Day, and Next Day
Which object do you use to configure how accruals are to be awarded?
- A . Time Account
- B . Time Account Type
- C . Time Type
- D . Accrual Calculation Base
Where in the Employee Time object definition should you assign the Time Off workflow trigger rule?
- A . Validate Rule
- B . Save Rule
- C . PostSave Rule
- D . Initialize Rule
What are the characteristics of Time Type classification Extra? Note: There are 2 correct answers to this question.
- A . Recordings of Extra Time Types do NOT create collisions with other time recordings.
- B . Recordings of Extra Time Types can further specify Attendance recordings.
- C . Recordings of Extra Time Types CANNOT collide with Attendance recordings.
- D . Recordings of Extra Time Types can further specify Allowance recordings.
You created an Attendance Time Type. When trying to assign it to a Time Profile, you realize it is NOT listed in the drop down for Available Time Types.
What are some possible reasons? Note: There are 3 correct answers to this question.
- A . The Country/Region assigned to Time Type and Time Profile have the same code.
- B . The Country/Region is assigned to Time Type, but missing in Time Profile.
- C . The Country/Region assignment is missing in both Time Profile and Time Type.
- D . The Country/Region assigned to Time Type and Time Profile have different codes.
- E . The Country/Region is assigned to Time Profile, but missing in Time Type.
You are using Clock In Clock Out Group in Job Info.
What is the correct combination that you are allowed to use?
- A . Time Recording Variant: Clock Times Time Record profile with Time Recording Variant set to Negative
- B . Time Recording Variant: Duration Time Record profile with Time Recording Variant set to Positive
- C . Time Recording Variant: Clock Times Time Record profile with Time Recording Variant set to Positive
- D . Time Recording Variant: Duration Time Record profile with Time Recording Variant set to Negative
Which posting type should you use to import time account balances?
- A . Accrual
- B . Entitlement
- C . Recalculation
- D . Manual adjustment
You have configured Period-EndProcessing to happen automatically. Your Time Account is valid from January 1 – December 31, 2022, and bookable from January 1, 2022 – March 31, 2023.
When is the automatic Period-End Processing calendar executed?
- A . 2023-01-01 00:00:00
- B . 2022-12-31 00:00:00
- C . 2023-04-01 00:00:00
- D . 2023-03-31 00:00:00
Which tool do you use to import Work Schedules?
- A . Import Employee Data
- B . Import and Export Data
- C . Import Foundation Data
- D . Import/Export Corporate Data Model
What are the allowed Message Types in a Time Valuation rule?
- A . Error and Information
- B . Information, and Alert and Warning
- C . Error, Information, and Alert and Warning
- D . Error, and Alert and Warning
Which of the following objects can you use to define the type of Time Management data that is replicated to SAP SuccessFactors Employee Central Payroll?
- A . Data Replication Monitor Configuration
- B . Data Replication Proxy
- C . Replication Target System
- D . Data Replication Configuration
You import a leave request. In your import file, you set the Approval Status field to Pending.
What happens after import?
- A . A workflow is triggered automatically.
- B . The approval status field is automatically set to Approved.
- C . The import of the leave request fails.
- D . The approval status field is in Pending status.
What is the purpose of the IF condition in the following take rule?
- A . To prevent more than 4 sick leave days from being created in a month
- B . To prevent more than 4 sick leave days from being created on the first day of the month
- C . To prevent more than 4 sick leave requests from being created on the first day of the month
- D . To prevent more than 4 sick leave requests from being created in a month
Which tasks can an administrator accomplish using the Time Administrator Workbench? Note: There are 3 correct answers to this question.
- A . Approve time sheets.
- B . Review attendance recordings.
- C . Analyze time account postings.
- D . Perform time account payouts.
- E . Create absences for employees.
What settings are possible in a Time Recording Profile? Note: There are 3 correct answers to this question.
- A . Time Valuation
- B . Time Valuation Period
- C . Workshedule
- D . Workflow
- E . Time Type
Employees in your company can get their Time Account balances paid out. You replicate the Time Account with its related information. As such, Time Account payouts are replicated to info type 0416.
What do you need to keep in mind?
- A . You need to avoid double payment because payouts are also replicated to info type 0015 in the form of spot bonuses.
- B . You need to avoid double payment because payouts are also replicated to info type 0015 in the form of time valuation results.
- C . You need to avoid double payment because payouts are also replicated to info type 2010 in the form of spot bonuses.
- D . You need to avoid double payment because payouts are also replicated to info type 2010 in the form of time valuation results.
The customer has a collective/union agreement that automatically provides employees with a 15 minute break for every 3 hours they work during a non-working day or public holiday.
What break configuration is required in this case?
- A . Create a Fixed Break and assign it to the employee’s Job Info.
- B . Create a Dynamic Break and assign it to the employee’s Workschedule.
- C . Create a FixedBreak in the employee’s Workschedule.
- D . Create a Dynamic Break and assign it to the employee’s Job Info.
How is a Night Shift Bandwidth used in a Work Schedule Day Model? Note: There are 2 correct answers to this question.
- A . It can be used if the Time Recording Variant is Duration.
- B . It can be used if the Time Recording Variant is Clock Times.
- C . It can be used only if the Cross Midnight Allowed is set to Yes.
- D . It can be used if Cross Midnight Allowed is set to No.
A customer wants to calculate a specific payment for employees working between 7:00 pm to 11:59 pm.
In the Time Evaluation rule, what is the appropriate Time Valuation Type to be used to achieve this?
- A . Difference between Threshold and Input
- B . Compare Threshold with Input Group and Counted Events
- C . Compare Threshold with Comparison Group to Route Input
- D . Filter Segments from Input Groups
Whichthreshold options are allowed for Time Valuation Type Aggregate Input Group and Split? Note: There are 2 correct answers to this question.
- A . Time Type Group
- B . Fixed Value
- C . Time Record Filter
- D . Time Segment
An employee is hired on January 10, 2022, with yearly accruals as accrual frequency.
What is the correct accruable and accrual period combination?
- A . Accrual period = January 1 C December 31, 2022, Accruable period = January 10 C December 31, 2022
- B . Accrual period = January 1 C December 31, 2022, Accruable period = January 10 C January 31, 2022
- C . Accrual period = January 1 C January 31, 2022, Accruable period = January 10 C January 31, 2022
- D . Accrual period = January 1 C January 31, 2022, Accruable period = January 1 C January 31, 2022
You need to send an alert to the HR admin if an employee is sick for more than 15 days.
How would you define the reminder alert?
- A . As a post save rule in the Time Type object definition
- B . As a save rule in the Employee Time object definition
- C . As a save rule in the Time Type object definition
- D . As a post save rule in the Employee Time object definition