Exam4Training

SAP C_IBP_2302 SAP Certified Application Associate – SAP IBP for Supply Chain (2302) Online Training

Question #1

You created a key figure and want to add calculations.

Which of the following rules do you consider? Note: There are 2 correct answers to this question.

  • A . Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
  • B . The calculation chain for a key figure must always result in a calculated key figure.
  • C . Key figurescan be calculated across different planning levels.
  • D . All key figure calculations have calculation inputs, which can be marked as stored or calculated.

Reveal Solution Hide Solution

Correct Answer: C,D
Question #2

Where can the results of a Time Series Analysis be used? Note: There are 2 correct answers to this question.

  • A . During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app
  • B . In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs
  • C . In the Manage Forecast Error Calculations app C Demand Planning app to calculatethe Forecast Error CV
  • D . In the Microsoft Excel add-in, where you can use them to limit and filter your planning views

Reveal Solution Hide Solution

Correct Answer: B D
Question #3

Model configuration allows the attributes of a master data type to be assigned as key figures.

Which features are relevant for this type of object?

  • A . This type of key figure is not usually stored and it cannot be set to editable.
  • B . This object is not exposed to the user in planning views or modeling.
  • C . This object contains user-definedcriteria that monitor the running of business plans.
  • D . This object provides a single value for a unique planning combination.

Reveal Solution Hide Solution

Correct Answer: A
Question #4

For which of the following application jobs can you enter planning filters as parameters? Note: There are 2 correct answers to this question.

  • A . Purge Master Data
  • B . Create Time Periods for Time Profiles
  • C . Purge Key Figure Data
  • D . Purge Non-Conforming Data

Reveal Solution Hide Solution

Correct Answer: C D
Question #5

Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct answers to this question.

  • A . The total number of attributes that can use subtotals in the planning view can be restricted.
  • B . The values of the attribute-based total at the highest attribute level in the planning level can be changed.
  • C . Only attribute-based totals can be added to the planning view.
  • D . The total value can be added before or after the selected attribute.

Reveal Solution Hide Solution

Correct Answer: A,D
Question #6

You are adding a value-based filter to a planning view.

Which of the following conditions apply? Note: There are 3 correct answers to this question.

  • A . You can only apply one value-based filter per planning view.
  • B . The alerts dashboard is not available if a value-based filter is set for the open planning view.
  • C . You can add (or delete) planning objects to a planning view after these filters are applied.
  • D . These filters can be used together with attribute totals in the same planning view.
  • E . These filters are always applied based on the values stored in the database.

Reveal Solution Hide Solution

Correct Answer: B C D
Question #7

Which of the following are features of the S&OP process templates? Note: There are 2 correct answers to this question.

  • A . New instances of templates allow for re-use of the same processes.
  • B . All process templates are assigned to dashboards.
  • C . Each step depicted in the template can have tasks associated with it.
  • D . The S&OP process step can be started with an application job.

Reveal Solution Hide Solution

Correct Answer: A,C
Question #8

You are configuring disaggregation for the KF1 key figure in the Planning Areas Model Configuration app.

Which methods can you use? Note: There are 3 correct answers to this question.

  • A . Disaggregation according to a helper key figure
  • B . Proportional disaggregation by using KF2 in the expression
  • C . Disaggregation according to an equal split
  • D . Disaggregation according to a user-defined expression
  • E . Disaggregation in batch triggered by an application job

Reveal Solution Hide Solution

Correct Answer: A,C,D
Question #9

How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle? Note: There are 2 correct answers to this question.

  • A . Simulate heuristics run in Supply Reviewstage
  • B . Simulate statistical forecast at the Demand Review stage
  • C . Simulate demand sensing inputs for Supply Review
  • D . Model inventory turns based on Target Safety stocks

Reveal Solution Hide Solution

Correct Answer: A,B
Question #10

You need to make manual adjustments to your S&OP plan.

Which are possible ways of making these changes? Note: There are 2 correct answers to this question.

  • A . Using Microsoft Excel planning views
  • B . Leveraging the web-based planning capability
  • C . Leveraging the functionality of SAP Workzone
  • D . Using Driver-Based planning

Reveal Solution Hide Solution

Correct Answer: A,B

Question #11

How many different time levels can be selected within one planning view?

  • A . Only base time levels of the planning area
  • B . All time levels available in the time profile
  • C . All time levels available in the time profile, restricted by global configuration parameter
  • D . Only time levels from the base planning level of selected key figures

Reveal Solution Hide Solution

Correct Answer: B
Question #12

You are working to realign the data due to a recent warehouse closure.

What should you be aware of in regards to the realignment steps settings? Note: There are 2 correct answers to this question.

  • A . The name of the realignment step should be no longer than 20 characters.
  • B . You must mark the realignment step as "shared" andassign the steps to users.
  • C . The number of steps in the realignment run is limited to 255.
  • D . A realignment step can change master data, planning objects and key figures.

Reveal Solution Hide Solution

Correct Answer: A C
Question #13

The S&OP Operator Profiles app is used to configure different types of algorithms.

Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer? Note: There are 2 correct answers to this question.

  • A . Time profile level
  • B . Discretization
  • C . Processing mode
  • D . Global cost factors

Reveal Solution Hide Solution

Correct Answer: B,D
Question #14

You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.

Which settings can you change and still run a successful consistency check? Note: There are 2 correct answers to this question.

  • A . Add a new time profile level to the time profile.
  • B . Change the numbering hierarchy of the period IDs in the time profile.
  • C . Change the description of the attributes in the time profile.
  • D . Change the past and future horizon of the levels in the time profile.

Reveal Solution Hide Solution

Correct Answer: C,D
Question #15

You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.

Which of the following parameters can you model to plan production with extra shift(s)?

  • A . Capacity expansion with additional costs
  • B . Adjusted production interactive values
  • C . Incremental production values
  • D . Production source validity at the start of seasonal peak

Reveal Solution Hide Solution

Correct Answer: A
Question #16

What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct answers to this question.

  • A . Link two analytics charts.
  • B . Rename the charts.
  • C . Add process templates.
  • D . Display all assigned analytics on a single UI.
  • E . Use drill-down functionality.

Reveal Solution Hide Solution

Correct Answer: A B E
Question #17

What are the possible ways that an attribute intended for use as an attribute as a key figure can be created and assigned?

  • A . Created as type NVARCHAR and assigned to an external master data type
  • B . Created as type INTEGER and assigned to a compound master data type
  • C . Created as type INTEGER and assigned to a simple master data type
  • D . Created as type DECIMAL and assigned to a compound master data type

Reveal Solution Hide Solution

Correct Answer: C
Question #18

Which SAP IBP planning operator can be run to delete planning objects in a certain version?

  • A . Purge Key Figure Data
  • B . Purge Key Figure Data Outside Planning Area Planning Horizon
  • C . Purge Non-Confirming Data
  • D . Purge Master Data

Reveal Solution Hide Solution

Correct Answer: A
Question #19

What are the S&OP operator (optimizer) parameters associated with demand fair share?

  • A . Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
  • B . Number of fair share segments Additional tiering costs (default) Inventory days of supply
  • C . Number of fair share segments Maximum days of coverage Number of fair share
    segments late delivery
  • D . Number of fair share segments Additional tiering costs (default) Maximum inventory

Reveal Solution Hide Solution

Correct Answer: A
Question #20

Forecast Error CV is an input to which of the following?

  • A . Time-Series-Based Supply Planning Optimizer
  • B . Calculate Target Inventory Components in Inventory Planning Profile Operator
  • C . Forecast Error Calculation in Inventory Planning Profile Operator
  • D . Multistage Inventory Optimization in Inventory Planning Profile Operator

Reveal Solution Hide Solution

Correct Answer: D

Question #21

You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.

How can you resolve this problem? Note: There are 2 correct answers to this question.

  • A . Use the Data Integration app to load suitable data that creates the combinations
  • B . Use the Check Mode operator to create the combinations
  • C . Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
  • D . Use the Manage Master Data app to create the combinations

Reveal Solution Hide Solution

Correct Answer: A,C
Question #22

A time profile is defined with these levels: day, technical week, week, month, quarter, and year.

What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?

  • A . IF("PERIODID4" ="$$PERIODID4CU$$…)
  • B . IF("PERIODID2" ="$$PERIODID2CU$$…)
  • C . IF("PERIODID3" ="$$PERIODID3CU$$…)
  • D . IF("PERIODID5" ="$$PERIODID5CU$$…)

Reveal Solution Hide Solution

Correct Answer: C
Question #23

Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm? Note: There are 2 correct answers to this question.

  • A . Sales Order Quantities (both historical and future open orders)
  • B . Forecast Error CV Calculated by Manage Forecast Error Calculations app
  • C . Future Consensus Forecasts and Lagged Forecast Snapshots
  • D . Recommended Safety Stocks from Multistage Inventory Optimization

Reveal Solution Hide Solution

Correct Answer: A C
Question #24

Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct answers to this question.

  • A . Violation of minimum resource utilization
  • B . Not adhering to maximum transport values
  • C . Not respecting production capacity
  • D . Violation of minimum aggregated inventory values
  • E . Not-fully satisfied demands

Reveal Solution Hide Solution

Correct Answer: A,B,E
Question #25

You are developing the functionality and appearance of the Excel UI for SAP IBP business users.

Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding? Note: There are 2 correct answers to this question.

  • A . Changing the member names
  • B . Changing the layout of the master data workbooks
  • C . Changing the entries from the Name Manager
  • D . SAP IBP ribbon extension

Reveal Solution Hide Solution

Correct Answer: B,D
Question #26

Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct answers to this question.

  • A . The Business Meaning of the attribute has been specified.
  • B . The attribute should be a non-key attribute of the master data type.
  • C . The attribute belongs to a simple or compound master data type.
  • D . The attribute should be assigned to all planning levels.

Reveal Solution Hide Solution

Correct Answer: B,C
Question #27

Which pre-processing steps can be used to cleanse historical sales data before generating a statistical forecast in SAP IBP? Note: There are2 correct answers to this question.

  • A . Substitute Missing with Mean or Median in Sales History
  • B . Intermittency Detection and Correction in Sales History
  • C . Promotion Sales Lift Elimination
  • D . Bias Detection and Correction in Sales History

Reveal Solution Hide Solution

Correct Answer: A,B
Question #28

Which of the following are examples of time-independent key figures? Note: There are 2 correct answers to this question.

  • A . A special key figure marked as an aggregate key figure (aggregate constraint)
  • B . A currency conversion key figure, such as exchangerate
  • C . A unit of measure key figure, such as UOMCONVERSIONFACTOR
  • D . A forecast metric key figure, such FCSTMAPE

Reveal Solution Hide Solution

Correct Answer: B,C
Question #29

SAP IBP ensures interoperability with which applications? Note: There are 2 correct answers to this question.

  • A . Salesforce Sales Cloud
  • B . User management in SAP Success Factors
  • C . Financial Planning in SAP Analytics Cloud
  • D . Business Network in SAP Ariba

Reveal Solution Hide Solution

Correct Answer: C,D
Question #30

You are reviewing the master datatypes that are often used for supply and inventory planning.

Which master data types are compound master data types? Note: There are 2 correct answers to this question.

  • A . SOURCELOCATION
  • B . SOURCECUSTGROUP
  • C . SOURCECUSTOMER
  • D . SOURCEPRODUCTION

Reveal Solution Hide Solution

Correct Answer: A,C
Exit mobile version