In what customizing table do you group employees for use in personnel calculation rules (PCRs)?
- A . V_T511
- B . V_001P_K
- C . V_512W O
- D . V_503_B
Which activities must you configure before running a payroll? Note: There are 2 correct Answers to this question.
- A . Generate payroll periods.
- B . Create control records.
- C . Create organizational units.
- D . Assign cost centers to positions.
What operation must you use to query an employee’s personnel area in a personnel calculation rule (PCR)?
- A . OUTWPPLANT
- B . OUTWPPAYSB
- C . OUTWPABART
- D . OUTWPPARTT
Which processing class determines if a wage type should be considered for factoring?
- A . Processing class 10
- B . Processing class 6
- C . Processing class 3
- D . Processing class 20
Which wage type do you use for cumulations?
- A . /552
- B . /101
- C . /001
- D . /801
How can you view the status of the payroll run?
- A . By using the payroll infotype
- B . By using the payroll area
- C . By using the payroll period
- D . By using the payroll control record
Which functions use MODIF A to evaluate absences?
- A . WPBP
- B . RAB
- C . PAB
- D . P2001
An employee reports an absence that spans several payroll periods.
Where can SAP Payroll evaluate the absence using absence valuation? Note: There are 3 correct Answers to this question.
- A . On the working day in which the absence ends
- B . In the payroll period in which the absence begins
- C . On the actual dates in each affected payroll period
- D . In the working week in which the absence begins
- E . In the payroll period in which the absence ends
What must you define in the attributes of a personnel calculation rule (PCR)? Note: There are 2 correct Answers to this question.
- A . Processing class
- B . Program class
- C . Project assignment
- D . Country grouping
A vacation wage type is to be generated for an employee based on vacation.
Which identifiers play an important role in Absence Valuation (v_T554C) in Customizing?
- A . MODIF A and Absence Valuation Rule
- B . MODIF 2 and Absence Valuation Rule
- C . MODIF W and Absence Valuation Rule
- D . MODIF W and the Day Rule
The following wage type with its wage type fields is given:
What is the result of the wage type in the output IT if it only runs through the following calculation rules: MULTI RAA and ADDWT *?
- A . Rate = 0
Number = 0
Amount = 130 - B . Rate = 0
Number = 0
Amount = 0 - C . Rate = 10
Number = 0
Amount = 130 - D . Rate 10
Number = 0
Amount = 0
Which scenarios cause factoring to occur when they happen in the middle of a pay period? Note: There are 2 correct Answers to this question.
- A . A new main bank record is created.
- B . An employee has a basic pay change.
- C . An employee’s name is updated.
- D . A different work schedule rule is assigned.
What function generates time wage types on the TIP table?
- A . GWT
- B . DAYPR
- C . PIT
- D . PZL
In which payroll subschema are time wage types selected?
- A . TM00 Time Evaluation with Clock Times
- B . TM04 Time Evaluation Without Clock Times
- C . TC00 Time Data Processing, WT Selection
- D . XINO Initialization of payroll (INTERNATIONAL)
Which of the following personnel calculation rules does the system use in the subschema of XAL9 factoring and storage? Note: There are 2 correct Answers to this question.
- A . X020
- B . X015
- C . XPPF
- D . XVAL
Which of the following rules are used to determine hourly rates for all employees? Note: There are 2 correct Answers to this question.
- A . X010
- B . X012
- C . X015
- D . X013
Under what condition will a time wage type be selected using the rule shown in the attached graphic?
- A . On a Sunday
- B . For all planned work
- C . NOT on a public holiday
- D . After a maximum of two work hours
When processing a wage type, there is no requirement to differentiate between employee subgroup groupings.
What value must you add in parameter 3 when function PIT calls the rule to process the wage type?
- A . GEN
- B . Pnn
- C . NOAB
- D . <Blank>
What is the name of the international subschema that is used to initialize payroll?
- A . XTOO
- B . XBDO
- C . XINO
- D . XEND
You want to multiply wage type fields rate and number in a calculation rule. The result should be in the amount field. The values in the rate and number fields should then be set to zero.
Which arithmetic operations do you have to use?
- A . • MULTI RNA
• ELIMI=N
• ELIMI=N - B . • MULTI ARN
• ZERO=N
• ZERO=A - C . • MULTI RNA
• ZERO=N
• ZERO=R - D . • MULTI ANR
• ZERO=N
• ZERO=A
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
You are working in an international accounting protocol of SAP with functions and tables.
Which of the following is both a function and a table?
- A . GENPS
- B . COPY
- C . WPBP
- D . PIT
Which functions do you use to import infotypes data into the current payroll run? Note: There are 2 correct Answers to this question.
- A . COM
- B . WPBP
- C . 2010
- D . PIT
Which personnel calculation rule is used to determine the "Time wage type selection group" (MODIF
W)?
- A . XMOD
- B . X015
- C . X013
- D . TMOD
Which wage type’s can you use to calculate the hourly base rate for salaried employees? Note: There are 2 correct Answers to this question.
- A . /802
- B . /001
- C . /801
- D . /002
In rule XPPF, what does operation PPPAR check? Note: There are 2 correct Answers to this question.
- A . Employee entry or exit after period start
- B . Payments replaced
- C . Work place basic pay splits
- D . Current entry in arrears
What function do you use to select the time wage types for table DZL?
- A . P2002
- B . DAYMO
- C . GWT
- D . TIMTP
Which of the following values are allowed in parameter 2 for function PIT? Note: There are 2 correct Answers to this question.
- A . PRT
- B . NOAB
- C . P10
- D . GEN
You want to use rule Z123 to process only wage type 1200 in the results table (RT). The processing will differ for hourly and salary employees.
How do you call the rule?
- A . PRT Z123 <blank> NOAB
- B . PRT Z123 <blank> <blank>
- C . PRT Z123 GEN NOAB
- D . PRT Z123 1200 <blank>
What is the purpose of the GENAU constant in the standard payroll process?
- A . It decreases the time for processing payroll.
- B . It increases the accuracy of rounding.
- C . It provides employee groupings for payroll.
- D . It removes redundancy from calculations.