You have set up a new 2-node switchless cluster and want to verify that the failover is configured correctly.
In this scenario, which two commands accomplish this task? (Choose two.)
- A . cluster ha show
- B . storage failover show
- C . cluster ring show
- D . storage failover show-takeover
AB
Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMLP2492713
You are completing an ONTAP base installation, and your customer is asking you to create two SVMs, one for NFS and one for SMB.
Which type of SVM needs to be created to complete the installation?
- A . system SVM
- B . data SVM
- C . admin SVM
- D . multitenancy node SVM
Which NetApp tool relies on PowerShell to produce a comprehensive handover report to the customer?
- A . Active IQ
- B . Config Advisor
- C . NetAppDocs
- D . Fusion
Which LIF type is used by default for hardware-assisted storage failover communication?
- A . intercluster
- B . node-mgmt
- C . data
- D . cluster-mgmt
B
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950% 2Fstorage__failover__hwassist__show.html
Which LIF type is used by default for hardware-assisted storage failover communication?
- A . intercluster
- B . node-mgmt
- C . data
- D . cluster-mgmt
B
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950% 2Fstorage__failover__hwassist__show.html
Which LIF type is used by default for hardware-assisted storage failover communication?
- A . intercluster
- B . node-mgmt
- C . data
- D . cluster-mgmt
B
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950% 2Fstorage__failover__hwassist__show.html
Which LIF type is used by default for hardware-assisted storage failover communication?
- A . intercluster
- B . node-mgmt
- C . data
- D . cluster-mgmt
B
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950% 2Fstorage__failover__hwassist__show.html
Which LIF type is used by default for hardware-assisted storage failover communication?
- A . intercluster
- B . node-mgmt
- C . data
- D . cluster-mgmt
B
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950% 2Fstorage__failover__hwassist__show.html
Which LIF type is used by default for hardware-assisted storage failover communication?
- A . intercluster
- B . node-mgmt
- C . data
- D . cluster-mgmt
B
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950% 2Fstorage__failover__hwassist__show.html
Which LIF type is used by default for hardware-assisted storage failover communication?
- A . intercluster
- B . node-mgmt
- C . data
- D . cluster-mgmt
B
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-cmpr-950% 2Fstorage__failover__hwassist__show.html
Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.
You just installed two nodes into an existing ONTAP cluster.
When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?
- A . The node-management LIF has to be on e0M for NTP to work.
- B . The DNS is not configured for this node.
- C . The NTP is adjusting in small increments.
- D . No NTP server is configured for this node.
When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)
- A . Complete a Service Event Report.
- B . Use Config Builder to create a configuration spreadsheet.
- C . Review the hardware components in Hardware Universe.
- D . Open a support case to prepare for the installation.
- E . Search for Technical Support bulletins for the hardware.
Node 3 has taken over Node 4. You are attempting to access Node 4 on its management interface but cannot do it. In this scenario, how would you access Node 4’s management interface?
- A . You must use the Service Processor; node management LIFS do not fall over between nodes.
- B . You have not waited long enough for the failover timeout for a node management LIF; there is a broadcast domain configured for this situation.
- C . You should use SSH directly to one of the cluster interconnect switches; from there, you can use SSH to the node management on node 4.
- D . Connect to the node management on Node 3 and then use the HA interconnect to access node 4.
You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager. In this scenario, what caused this problem?
- A . Breakout cables were used and the second port on the same ASIC became disabled.
- B . This is a hardware error and you must open a case with NetApp Support.
- C . You must first enable the ports using the network port modifycommand.
- D . You are missing a license to enable those ports.
C
Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP11694144
A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports.
However, LIFs that serve the block have not migrated. In this scenario, what is happening?
- A . The failover group is configured incorrectly.
- B . The fiber switch is configured incorrectly.
- C . There is a faulty SFP.
- D . The LIFs that serve the block protocol do not failover.
A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually. In this scenario, which type of license provides this functionality?
- A . Demo License
- B . Site License
- C . Standard License
- D . Evaluation License
In a 4-node cluster, what are two functions of the HA interconnect? (Choose two.)
- A . It provides the ability to relocate the aggregate ownership.
- B . It provides the ability to synchronize the cluster configuration.
- C . It provides nondisruptive operations and fault tolerance.
- D . It provides the ability to migrate a data aggregate to any node in the cluster.
AC
Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1610209
You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.
Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?
- A . 1/21 to 1/24
- B . 0/13 to 0/16
- C . 1/31 and 1/32
- D . 0/1 and 0/2
After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.
Referring to the exhibit, what caused the problem?
- A . Port a0a of node cluster1-01 is down.
- B . The LIF has to be configured with a failover group.
- C . The ports of cluster1-02 are missing in the broadcast domain.
- D . The broadcast-domain MTU needs to be either 1500 or 9000.
D
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-ug-rdg%2FGUID-3EC50093-6858-46B4-8B70-0B5AE4BDAB69.html
Which two NetApp features encrypt storage data? (Choose two.)
- A . NVE
- B . NSE
- C . TPM
- D . NVMe
AB
Explanation:
Reference: https://www.netapp.com/us/media/ds-3899.pdf
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Your customer regularly schedules disaster recovery tests to ensure the high availability capabilities of the ONTAP cluster.
In this scenario, which two commands would you use to perform this test? (Choose two.)
- A . system node run -node NetApp-Cluster-02 -command cf takeover
- B . storage failover giveback -of-node NetApp-Cluster-02
- C . system node run -node NetApp-Cluster-02 -command cf giveback
- D . storage failover takeover -of-node NetApp-Cluster-02
BD
Explanation:
Reference: https://www.netapp.com/us/media/tr-3450.pdf (37)
Set the adapter to status-admin up.
Explanation:
Reference: https://kb.netapp.com/app/answers/answer_view/a_id/1001031/~/what-are-unified-targetadapter-%28uta2%29%2Fcna-ports-and-how-to-configure-them%3F
Which NetApp tool should you use to set up an ONTAP 9.5 cluster?
- A . Config Advisor
- B . System Setup
- C . SANtricity Storage Manager
- D . OnCommand System Manager
A
Explanation:
Reference: http://www.admin-sys.com/IMG/pdf/Config_Advisor_32_Installation_and_Administration_Guide.pdf
While preparing for a new ONTAP installation, you discover an issue with the controllers that are running ONTAP 9.5. The issue is not affecting controllers that are running ONTAP 9.4 with the latest patch version. In this scenario, which two steps should you perform to solve the problem? (Choose two.)
- A . Review the issue with the customer’s deployment to see if it would be affected.
- B . Inform your customer that they must always install the latest supported ONTAP release.
- C . If the controllers are in a Product Support Bulletin with ONTAP 9.5, open a case and wait for support to provide a patch release.
- D . Download ONTAP 9.4 with the latest patch version and ONTAP 9.5 for an eventual rollback on the day of the installation.
Which keyboard combination enables you to access the Service Processor (SP) or the Board Management Control (BMC) from the system console CLI?
- A . Ctrl + D
- B . Ctrl + G
- C . Ctrl + S
- D . Ctrl + C
B
Explanation:
Reference: https://kb.netapp.com/app/answers/answer_view/a_id/1001033/~/what-is-a-baseboardmanagement-controller-%28bmc%29-and-how-do-i-use-it%3F
You are installing a new 2-node AFF A220 cluster running ONTAP 9.5. The customer would like to use the UTA2 adapters from the first controller to connect to the 10GbE front-end switches. On the second controller, they would like to use the first UTA2 port as a target FC port, and the second as an FC initiator. In this scenario, according to NetApp Best practices, what should your customer do?
- A . Change all the UTA2 ports from CNA mode to FC mode.
- B . Change all the UTA2 ports to CNA to support both FC and Ethernet.
- C . Change the first two ports of each controller to FC and the last two to CNA.
- D . Change the UTA2 ports from CNA mode to FC mode on the first controller.
C
Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMLP284266 7
You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
- A . 9a/1d
- B . 9c/1a
- C . 9b/1b
- D . 9a/1a
What are two types of load balancing methods available in multimode interface groups? (Choose two.)
- A . broadcast domain-based load balancing
- B . IP-based load balancing
- C . LIF-based load balancing
- D . port-based load balancing
BD
Explanation:
Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-nmg/GUID-27EAC723-A07A4F60-A1AC-8E91AE6AE82E.html
You are deploying a cluster with four AFF A300 nodes and Cisco 3232C switches. When you arrive at the customer’s site, you notice that there are multiple breakout cables and four Cisco 3232C switches. In this scenario, which statement is true?
- A . A 4-node AFF A300 cluster requires four Cisco 3232C switches.
- B . Cisco best practices require four Cisco 3232C switches for high availability.
- C . A 4-node AFF A300 cluster requires two Cisco 3232C switches for the cluster interconnect and two for management.
- D . Your customer ordered a MetroCluster IP configuration.
Which statement about LIFs is true?
- A . Cluster LIFs and data LIFs can share a port.
- B . One cluster-management LIF exists per node.
- C . One port can host multiple data LIFs.
- D . A data LIF can be associated with multiple SVMs.
C
Explanation:
Reference: https://library.netapp.com/ecmdocs/ECMP1196907/html/GUID-C8355A55-5063-4EF5-B0D291BC187681D5.html
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.
The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)
- A . The customer needs to enable AutoSupport for both nodes.
- B . The customer needs to exclude the two nodes from the attachment-size limitation.
- C . The customer needs to change the transport protocol to HTTP.
- D . The customer needs to white-list the two nodes on their mail server.
You are using a NetApp CN1610 cluster-interconnect switch and need to connect a new AFF A800A node to the switch.
In this scenario, how many Ethernet ports per node are required on each switch?
- A . 2
- B . 4
- C . 6
- D . 1
You have just installed a new AFF A220 4-node cluster with ONTAP 9.5 for a customer.
Which two cluster switches are supported in this scenario? (Choose two.)
- A . Cisco Nexus 5596UP
- B . Brocade 6510
- C . Cisco MDS 9148S
- D . NetApp CN1610
You install a new 2-node FAS8200 switchless cluster. You want to reach all necessary management LIFs and SPs for this cluster.
How many management IP addresses do you need in this scenario?
- A . 1
- B . 2
- C . 5
- D . 4
You have a 6-node ONTAP 9.1 cluster with two FAS6290 nodes and four FAS8080 EX nodes using a SAN protocol.
In this scenario, how many FAS9000 HA pairs would be joined to this cluster?
- A . 3
- B . 2
- C . 9
- D . 6