Network Appliance NS0-182 Certified Storage Installation Engineer, ONTAP Online Training
Network Appliance NS0-182 Online Training
The questions for NS0-182 were last updated at Nov 19,2024.
- Exam Code: NS0-182
- Exam Name: Certified Storage Installation Engineer, ONTAP
- Certification Provider: Network Appliance
- Latest update: Nov 19,2024
Insert a cable from left controller port 0a to IOMA port 2, and from port 0b to IOMB port 3.
You just installed two nodes into an existing ONTAP cluster.
When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?
- A . The node-management LIF has to be on e0M for NTP to work.
- B . The DNS is not configured for this node.
- C . The NTP is adjusting in small increments.
- D . No NTP server is configured for this node.
When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)
- A . Complete a Service Event Report.
- B . Use Config Builder to create a configuration spreadsheet.
- C . Review the hardware components in Hardware Universe.
- D . Open a support case to prepare for the installation.
- E . Search for Technical Support bulletins for the hardware.
Node 3 has taken over Node 4. You are attempting to access Node 4 on its management interface but cannot do it. In this scenario, how would you access Node 4’s management interface?
- A . You must use the Service Processor; node management LIFS do not fall over between nodes.
- B . You have not waited long enough for the failover timeout for a node management LIF; there is a broadcast domain configured for this situation.
- C . You should use SSH directly to one of the cluster interconnect switches; from there, you can use SSH to the node management on node 4.
- D . Connect to the node management on Node 3 and then use the HA interconnect to access node 4.
You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager. In this scenario, what caused this problem?
- A . Breakout cables were used and the second port on the same ASIC became disabled.
- B . This is a hardware error and you must open a case with NetApp Support.
- C . You must first enable the ports using the network port modifycommand.
- D . You are missing a license to enable those ports.
C
Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP11694144
A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports.
However, LIFs that serve the block have not migrated. In this scenario, what is happening?
- A . The failover group is configured incorrectly.
- B . The fiber switch is configured incorrectly.
- C . There is a faulty SFP.
- D . The LIFs that serve the block protocol do not failover.
A customer has a 6-node AFF A700 cluster and wants to add four nodes without having to update license functionality for each node manually. In this scenario, which type of license provides this functionality?
- A . Demo License
- B . Site License
- C . Standard License
- D . Evaluation License
In a 4-node cluster, what are two functions of the HA interconnect? (Choose two.)
- A . It provides the ability to relocate the aggregate ownership.
- B . It provides the ability to synchronize the cluster configuration.
- C . It provides nondisruptive operations and fault tolerance.
- D . It provides the ability to migrate a data aggregate to any node in the cluster.
AC
Explanation:
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1610209
You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.
Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?
- A . 1/21 to 1/24
- B . 0/13 to 0/16
- C . 1/31 and 1/32
- D . 0/1 and 0/2
After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.
Referring to the exhibit, what caused the problem?
- A . Port a0a of node cluster1-01 is down.
- B . The LIF has to be configured with a failover group.
- C . The ports of cluster1-02 are missing in the broadcast domain.
- D . The broadcast-domain MTU needs to be either 1500 or 9000.
D
Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-ug-rdg%2FGUID-3EC50093-6858-46B4-8B70-0B5AE4BDAB69.html
Latest NS0-182 Dumps Valid Version with 85 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
