Refer to the exhibit.
aaa authentication login default group radius
aaa authentication login NO_AUTH none
aaa authentication login vty local
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting update newinfo
aaa accounting dot1x default start-stop group radius
!
ip dhcp excluded-address 60.1.1.11
ip dhcp excluded-address 60.1.1.2
!
ip dhcp pool mabpc-pool
network 60.1.1.0 255.255.255.0
default-router 60.1.1.2
!
cts sxp enable
cts sxp default source-ip 10.9.31.22
cts sxp default password ccie
cts sxp connection peer 10.9.31.1 password default mode peer listener hold-time0
!
dot1x system-auth-control
!
interface GigabitEthernet1/0/9
switchport mode access
ip device tracking maximum 10
authentication host-mode multi-auth
authentication port-control auto
mab
!
radius-server host 161.1.7.14 key cisco
radius-server timeout 60
!
interface VLAN10
ip address 10.9.31.22 255.255.255.0
!
interface Vlan50
no ip address
!
interface Vlan60
ip address 60.1.1.2 255.255.255.0
!
interface Vlan150
ip address 150.1.7.2.255.255.255.0
Looking at the configuration what may cause the MAB authentication to fail for a supplicant?
A . There is an issue with the DHCP pool configuration
B . The VLAN configuration is missing on the authentication port
C . Incorrect CTS configuration on the switch
D . AAA authorization is incorrectly configured on the switch.
E . CoA configuration is missing
F . Dot1x should be globally disabled for MAB to work
G . Switch configuration is properly configured and the issue is on the Radius server.
Answer: G
Latest 400-251 Dumps Valid Version with 124 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund