From left to right, what is the correct hierarchical order of switch configuration priorities from least to most preferred?
- A . Site Configuration, Org-level template, Switch Settings
- B . Site Configuration, Switch Settings, Org-level template
- C . Switch Setting, Site Configuration, Org-level template
- D . Org-level template, Site Configuration, Switch Settings
You have just connected a new cloud ready EX series switch to your network. While you are waiting for the swith to boot up, you claim the switch to your organization. You have waited ten minutes for it to boot up and connect to the Mist cloud, however you notice that the Cloud LED is blinking yellow in and has a three blinks pattern.
In this scenario, which statement is correct about the LED color and blink pattern?
- A . The switch has successfully connected to the Mist cloud
- B . The switch has successfully connected to the Mist cloud, however it cloud not find your organization.
- C . The ZTP bootstrap process has been completed.
- D . The switch has not successfully connected to the Mist cloud.
You are using the Wired Visibility option as your Wired Assurance solution. In this scenario, which protocol is used to exchange basic device information between your switches and APs?
- A . Telemetry
- B . LLDP
- C . LACP
- D . SNMP
Which of the following are functions of EVPN in a Campus EVPN-VXLAN deployment? (Select two)
- A . Provides a control plane for MAC address learning
- B . Reduces the efficiency of data plane operations
- C . Facilitates multipath forwarding
- D . Limits the number of broadcast domains
MAC learning in an EVPN-VXLAN environment is unique because:
- A . It is based solely on static configurations
- B . It occurs through control plane signaling rather than traditional flooding
- C . It requires manual entry of MAC addresses
- D . It decreases network security
What is a benefit of implementing a service block border in a campus fabric?
- A . Improving user experience by prioritizing specific traffic flows.
- B . Reducing hardware costs by eliminating physical appliances.
- C . Simplifying network core device management.
- D . Increasing the network’s overall bandwidth capacity.
The use of templates in Wired Assurance provisioning facilitates:
- A . Increased manual configuration errors
- B . Standardization and scalability of network configurations
- C . Decreased network performance
- D . Reduced network visibility
Route distinguishers in EVPN are used to:
- A . Identify routes within the same EVPN instance
- B . Aggregate multiple routes into a single advertisement
- C . Ensure all routes are publicly accessible
- D . Differentiate between routes in overlapping IP spaces
Switch events are classified into which three severity levels? (Choose three.)
- A . Bad
- B . Critical
- C . Neutral
- D . Ignored
- E . Good
When viewing an individual switch managed in Mist, the Utilities drop-down includes which two testing tools? (Choose two.)
- A . Perform Cable Test
- B . Upgrade Firmware
- C . Bounce Ports
- D . Replace Switch
The deployment of Campus Fabric Architectures typically involves:
- A . Randomly placing switches
- B . Ignoring security protocols
- C . Detailed planning and phased implementation
- D . Using legacy networking models
The integration of VXLAN with EVPN provides which of the following benefits?
- A . Reduced control plane scalability
- B . Integrated control and data plane learning for efficient MAC address management
- C . Increased reliance on Layer 2 flooding
- D . Simplification of physical network topology
EVPN Multihoming is best described as:
- A . A feature that allows a single device to form peering relationships with multiple devices
- B . A process to limit devices to a single upstream connection
- C . A method to reduce network traffic efficiency
- D . The practice of connecting a device to multiple gateways for increased reliability
Which route types are associated with EVPN? (Select two)
- A . Ethernet Auto-Discovery (EAD)
- B . IP Prefix Route
- C . DHCP Route
- D . ARP Route
What are three requirements for using ZTP during a Mist AI greenfield provisioning? (Choose three.)
- A . Junos Space
- B . Claim code
- C . SNMP server
- D . Internet access
- E . DHCP server
You are going to adopt a switch in your organization’s inventroy.
Where would you go to adopt this switch?
- A . The site’s Inventory page
- B . The list of switches page
- C . The Campus Fabric page
- D . The organization’s Inventory page
The management of switches using MistAI Wired Assurance includes which of the following features?
- A . Manual-only switch discovery
- B . AI-driven insights for switch health
- C . Increased network congestion
- D . Reduced data security
Which type of device is commonly supported by Wired Assurance?
- A . Network switches and routers.
- B . Personal computers and laptops.
- C . Smart home devices.
- D . Fitness wearables.
Where should you activate and manage your Mist subscriptions?
- A . At the site-level
- B . At the organization-level
- C . At the device-level
- D . At the template-level
In the context of deploying wired assurance, which of the following are considered supported architectures?
- A . Cloud-managed networks
- B . On-premises data centers
- C . Hybrid cloud environments
- D . Peer-to-peer networks
- E . Virtual private networks (VPNs)
A subscription within the MistAI platform primarily enables access to:
- A . Basic device connectivity only
- B . Advanced AI features and analytics
- C . Physical network installation services
- D . Traditional network management tools
GPB and Micro segmentation are crucial for __________ within a Campus Fabric network.
- A . Reducing security
- B . Enhancing security
- C . Decreasing network visibility
- D . Increasing complexity
What is the primary goal of Wired Assurance Management in a network environment?
- A . To minimize network security
- B . To maximize network downtime
- C . To optimize network performance and reliability
- D . To increase manual configuration tasks
What is the main purpose of policies in EVPN?
- A . To restrict the types of devices that can connect to the network
- B . To define the behavior of route distribution and acceptance
- C . To physically separate different network segments
- D . To standardize network configurations across all devices
VTEP functions include: (Select two)
- A . Encrypting VXLAN traffic
- B . Encapsulating and de-encapsulating Ethernet frames into VXLAN packets
- C . Acting as a firewall between VXLAN segments
- D . Mapping tenant networks to VXLAN segments
What type of subscription models does Wired Assurance offer?
- A . Monthly and annual subscription plans.
- B . Lifetime one-time payment.
- C . Pay-per-use for each device connected.
- D . Subscription based on network traffic volume.
In MistAI wired assurance, what is a key benefit of the AI-driven operations?
- A . Decreased network visibility
- B . Increased network troubleshooting time
- C . Proactive identification and resolution of issues
- D . Requirement for more specialized networking staff
To ensure high availability in Campus Fabric Architectures, EVPN multihoming utilizes __________ to avoid single points of failure.
- A . Single connections
- B . Manual interventions
- C . Multiple redundant paths
- D . Fixed routing protocols
How do VXLAN and EVPN work together to support MAC learning in a scalable way?
- A . By relying exclusively on Layer 3 routing protocols
- B . Through dynamic flooding mechanisms in the data plane
- C . Using EVPN as a control plane to distribute MAC addresses over VXLAN tunnels
- D . Implementing static MAC address tables for each VTEP
How do Client Insights assist in Wired Assurance Operations?
- A . By providing detailed analytics on network cable colors
- B . Through offering predictions on stock market trends
- C . By offering visibility into the experience of wired clients on the network
- D . By tracking the physical location of network switches
Which EVPN route type is used for designated forwarder elections?
- A . 4
- B . 7
- C . 1
- D . 2
The main advantage of Campus Fabric IP Clos architecture is:
- A . Increased network complexity
- B . Decreased scalability
- C . Enhanced fault tolerance
- D . Limited data flow control
What are two benefits of deploying EVPN in a campus network? (Choose two.)
- A . active-active forwarding
- B . increased ARP flooding
- C . control plane mac address learning
- D . control plane encapsulation
How many days of data does the Mist cloud service store?
- A . 2
- B . 7
- C . 10
- D . 14
Which statement is true regarding an EVPN-VXLAN overlay?
- A . Only the edge devices need to support VXLAN
- B . It requires the use of PIM to forward BUM traffic.
- C . Every device along the forwarding path must support and participate in VXLAN.
- D . You must configure IGMP.
What is a primary characteristic of Campus Fabric Architecture?
- A . Decreased network flexibility
- B . Reduced scalability
- C . Enhanced network segmentation
- D . Higher operational costs
What are two classifiers under the wired Throughput SLE? (Choose two)
- A . interface anonalies
- B . storm control
- C . latency
- D . packet loss
EVPN multihoming in Campus Fabric Architecture is utilized to:
- A . Decrease network redundancy
- B . Provide link redundancy and load balancing
- C . Simplify network design complexities
- D . Increase single points of failure
EVPN multihoming supports __________, allowing multiple connections to be used simultaneously for redundancy and load balancing.
- A . Single active mode
- B . All active mode
- C . Passive mode
- D . Active-standby mode
What are two insight categories on the Mist WAN Edge Insights page? (Choose two.)
- A . Application Policies
- B . Blocked Applications
- C . WAN Edge Ports
- D . WAN Link State
Which two devices support Group Based policy?
- A . EX4100
- B . EX4300
- C . EX9200
- D . EX4400
Scaling requirements for Campus Fabric Architectures must consider __________ to ensure network efficiency and reliability.
- A . Color schemes
- B . Cable lengths
- C . Future growth
- D . Past performance
MistAI accounts are essential for which of the following reasons?
- A . To manually configure network devices
- B . To access AI-driven network insights
- C . To limit network functionality
- D . To reduce network security
In Campus EVPN-VXLAN deployments, multipath is used to: (Select two)
- A . Increase network redundancy and bandwidth
- B . Simplify network management
- C . Provide a single path for data flow
- D . Enhance load balancing across multiple paths
What are two valid ways to claim an EX Series switch using Mist? (Choose two.)
- A . Use the activaton code.
- B . Use the chassis serial number.
- C . Use the claim code.
- D . Use the company account code.