In the switching network as shown in the figure, all three switches only have the default VLAN 1, the interconnection ports of the three switches are Trunk, and all VLANs are allowed to pass, and the three switches have the global and port GVRP function enabled. VLAN 10 is created on the switch SVVA, VLAN 20 is created on the switch SWC, check the status information of each Trunk port on the three switches, the correct one is displayed below (choose one or more)

A . [SWA]display interface Ethernet 1/0/1
Ethernetl/0/1 current state: UP ……
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
B . [SWB]display interface Ethernet 1/0/1
Ethernet1/0/1 current state: UP ……
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
C . [SWB]display interface Ethernet 1/0/2
Ethernet1/0/2 current state: UP ……
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
D . [SWC]display interface Ethernet 1/0/1
Ethernet1/0/1 current state: UP ……
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q