- All Exams Instant Download
When the ADSL/ADSL2+ line conditions are better, what parameters can be adjusted to increase the transmission rate?
When the ADSL/ADSL2+ line conditions are better, what parameters can be adjusted to increase the transmission rate?A . Change the port channel mode to "fast"B . Change the port channel mode to "Interleaving" and increase the interleaving delayC . Reduce the target noise marginD . Improve the target noise marginView...
Is the following description correct?
Is the following description correct? Jitter buffer technology is used to eliminate the jitter of packets transmitted on the IP network and adjust the packets so that out-of-order and jitter packets are sent to the Decoder at a constant speed.A . TrueB . FalseView AnswerAnswer: A
Is the following description correct?
Is the following description correct? When negotiating a project acceptance test project with the customer, it is recommended that the product-related product acceptance manual is submitted directly to the customer, allowing the customer to select the test project.A . TrueB . FalseView AnswerAnswer: B
Which of the following can be the cause of the fault?
Two PPPoE users, the VLAN numbers respectively are 10 and 12. Use HT880 Modem, built-in PPPoE dial-up, user name belongs to the same domain. Both modems can successfully perform PPPoE dialing, but only one user can be online at the same time. Which of the following can be the cause...
When MA5680T traffic is scheduled, which of the following traffic will be marked as red?
When MA5680T traffic is scheduled, which of the following traffic will be marked as red?A . Lower than CIR's traffic.B . Higher than CIR's traffic but lower than PIR's.C . Higher than PIR's traffic.D . Higher than CBS's traffic.View AnswerAnswer: C
Checking the status of the POWER4845 on the UA5000 is always a fault. What is the possible reason for this? (Multiple Choice)
Checking the status of the POWER4845 on the UA5000 is always a fault. What is the possible reason for this? (Multiple Choice)A . The monitor line sequence is incorrect or damaged.B . The serial port where the monitoring cable is plugged in is incorrect.C . The hardware of the monitor...
When multicast services are configured on the MA5600T or MA5680T, programs in the multicast VLAN are statically configured. Which of the following must be configured? Otherwise, multicast programs may not be viewable.
When multicast services are configured on the MA5600T or MA5680T, programs in the multicast VLAN are statically configured. Which of the following must be configured? Otherwise, multicast programs may not be viewable.A . igmp previewB . igmp programC . igmp profileD . igmp priorityView AnswerAnswer: B
What are the reasons that may lead to PC Internet dialing 678 errors? (Multiple Choice)
What are the reasons that may lead to PC Internet dialing 678 errors? (Multiple Choice)A . PADI packets did not arrive at BRASB . BRAS send PADO packets discardC . Radius authentication does not passD . DNS resolution errorView AnswerAnswer: AB
What kind of business types does gemport support?
Data configuration is performed on the OLT. When adding a Gemport, the service type carried by the Gemport is usually selected. What kind of business types does gemport support? (Multiple Choice)A . ETHB . POTsC . TDMD . E1View AnswerAnswer: AC
If there are multiple Set top boxes watching a multicast program at the same time under a single ONT (for example: HG8245), enabling the following function on the MA5608T for the ONT multicast user can ensure that when a set-top box switches channels, programs watched by other STBs are not affected influences?
If there are multiple Set top boxes watching a multicast program at the same time under a single ONT (for example: HG8245), enabling the following function on the MA5608T for the ONT multicast user can ensure that when a set-top box switches channels, programs watched by other STBs are not...
