- All Exams Instant Download
To configure AAA, you first need to define the RADIUS server, RADIUS server defined manner as follows:
To configure AAA, you first need to define the RADIUS server, RADIUS server defined manner as follows: [Huawei] radius-server template EXAM [Huawei-radius-EXAM] radius-server shared-key cipher HUAwei123 [Huawei-radius-EXAM] radius-server authentication 10.7.66.66 1812 [Huawei-radius-EXAM] radius-server authorization 10.7.66.66 1812 [Huawei-radius-EXAM] radius-server accounting 10.7.66.66 1813 [Huawei-radius-EXAM] radius-server retransmit 2A . TrueB . FalseView AnswerAnswer:...
You want to set the DSCP value of VoIP traffic in HW network device as EF.
You want to set the DSCP value of VoIP traffic in HW network device as EF. According to distinguish service model RFC, flow mark EF should be set to:A . DSCP is set as decimal 36B . IP ToS is set as 0xEFC . IP Experimental ECND . DSCP is...
What are the key component of NAC?
What are the key component of NAC?A . communication agentB . NAC equipmentC . access terminalD . policy serverView AnswerAnswer: ABD
The following description of ASM model and SSM model, which is right?(please select three correct answer)
The following description of ASM model and SSM model, which is right?(please select three correct answer)A . in SSM model, the receiver can know in advance the position of the multicast sourceB . in ASM model, the receiver will not be able to know in advance the position of the...
So from this output, what conclusion can you draw?
There is a network composed by router R1, router R2, router R3 and router R4. The four routers are interconnected by a LAN network. All four routers deploy the basic OSPF. When you are executing the command "display ospf peer" on Router 2, you will find the status between Router2...
If there is a switch running STP, and now the switch G0/0/17 interface and G0/0/18 interface are connected by a cable, then on the scenario described below, which is correct?
If there is a switch running STP, and now the switch G0/0/17 interface and G0/0/18 interface are connected by a cable, then on the scenario described below, which is correct?A . G0/0/18 interface will enter the discarding stateB . Both G0/0/17 interface and G0 0/18 interface will enter the forwarding...
Which of the following description about GVRP interface registration mode in Huawei switch is true?
Which of the following description about GVRP interface registration mode in Huawei switch is true?A . GVRP interface registration mode have four types.B . When selecting Normal registration mode, allows the interface dynamic registration and logout VLAC . Logout here include deleting dynamically learned VLAN and VLAN administrators created in...
