- All Exams Instant Download
Under the RIP process of Huawei equipment, declared network 10.1.1.1/30, which of the following configuration is correct? ( ) (Multiple choice)
Under the RIP process of Huawei equipment, declared network 10.1.1.1/30, which of the following configuration is correct? ( ) (Multiple choice)A . network 10.1.1.0B . undo summary network 10.1.1.0C . Version 2 summary network 10.0.0.0D . undo summary network 10.1.0.0E . network 10.0.0.0View AnswerAnswer: CE
There are two routers RTA and RTB from the source device to the destination device, use the Tracert command to test the path. When detecting the first jump RTA, the source device to a large port of the destination device to send a UDP packet with a TTL of 1, when the packet arrives in RTB, TTL becomes 0, so the RTA respond a ICMP_________ message to the source device .
There are two routers RTA and RTB from the source device to the destination device, use the Tracert command to test the path. When detecting the first jump RTA, the source device to a large port of the destination device to send a UDP packet with a TTL of 1,...
Network administrator configures RIPng protocol in a small IPvs network, which of the following configuration is correct and effective?
Network administrator configures RIPng protocol in a small IPvs network, which of the following configuration is correct and effective?A . [RTA-GigabitEthernet0/0/0] ripng 1 enableB . [RTA] ripng 1 enableC . <RTA>ripng 1 enableD . [RTA-ripng-1] ripng 1 enableView AnswerAnswer: A
On VRP platform, which command is used to set up data link layer encapsulation type to HDLC on the Serial port?
On VRP platform, which command is used to set up data link layer encapsulation type to HDLC on the Serial port?A . encapsulation hdlcB . link-protocol hdlcC . hdlc enableD . link-protocol pppView AnswerAnswer: B
Network administrators use the Ping command on the AR G3 series routers to test the connectivity reaching 10.0.0.2, which of the following description of the output is correct?
00% packet loss round-trip min/avg/max = 2/6/10 ms Network administrators use the Ping command on the AR G3 series routers to test the connectivity reaching 10.0.0.2, which of the following description of the output is correct? ( )A . network administrators using command is ping -c 2 -s 800 10.0.0.2B...
In STP, assuming that all switches are configured the same priority, switch1 MAC address is 00-e04c-00-00-40, switch 2 MAC address is 00-e0-fc-00-00-10, switch3 MAC address is 00-e0-fc-00-00-20, switch4 MAC address is 00-e0-fc-00-00-80, the root switch should be ( ).
In STP, assuming that all switches are configured the same priority, switch1 MAC address is 00-e04c-00-00-40, switch 2 MAC address is 00-e0-fc-00-00-10, switch3 MAC address is 00-e0-fc-00-00-20, switch4 MAC address is 00-e0-fc-00-00-80, the root switch should be ( ).A . Switch 1B . Switch 2C . Switch 3D . Switch...
Refer to the following topology and configuration, the router R1 and R2 connect via Serial low-speed cable, and the data link layer encapsulation using PPP. When R1 and R2 Holdtime inconsistent, APP negotiation fails, can not communicate.
Refer to the following topology and configuration, the router R1 and R2 connect via Serial low-speed cable, and the data link layer encapsulation using PPP. When R1 and R2 Holdtime inconsistent, APP negotiation fails, can not communicate. A . TrueB . FalseView AnswerAnswer: B
NAPT is through TCP or UDP or IP packets in the protocol number to distinguish the different user's IP address.
NAPT is through TCP or UDP or IP packets in the protocol number to distinguish the different user's IP address.A . TrueB . FalseView AnswerAnswer: B
Refer to the following BHCP flow diagram, which of the following statement is correct? ( ) (Multiple choice)
Refer to the following BHCP flow diagram, which of the following statement is correct? ( ) (Multiple choice) A . The first step is to send multicast packetsB . The second step is to send unicast packetsC . The third step is to send broadcast packetsD . The fourth step...
VRP system login timeout time should be set under the VTY interface.
VRP system login timeout time should be set under the VTY interface.A . TrueB . FalseView AnswerAnswer: B
