Huawei H35-211-ENU HCIP-Access(Huawei Certified ICT Professional-Access) Online Training
Huawei H35-211-ENU Online Training
The questions for H35-211-ENU were last updated at Apr 22,2025.
- Exam Code: H35-211-ENU
- Exam Name: HCIP-Access(Huawei Certified ICT Professional-Access)
- Certification Provider: Huawei
- Latest update: Apr 22,2025
Use OTDR to locate the position of abnormal attenuation in the optical path. After the OTDR connection is to be detected the line, which of the following parameters can be set? (Multiple Choice)
- A . Set the measurement range
- B . Set the wavelength
- C . Set the mode
- D . Set the pulse width
It can be judged by the query results that (). (Multiple Choice)
- A . The service configuration of PPPoE users is normal
- B . The PPPoE user account and authentication method are correct
- C . The link between the MDU device and the BRAS is normal
- D . The MDU management IP is configured correctly
In the FTTB/C scenario, the ONU is connected to the phone as an AG device, and no sound failure when the SIP protocol is picked up. The possible cause is:
- A . olt upper network has packet loss
- B . The status of the MG interface on the ONU side is abnormal
- C . Voice server failure
- D . The route between ONU and IMS is unreachable
When the ONT fails or the hardware is upgraded, the ONT needs to be replaced, and the ONT service needs to be removed on the OLT, and then the ONT terminal is removed, and the new ONT service is registered and configured.
- A . Ture
- B . False
An IPTV user reports that the TV cannot be watched. Turn on the debugging switch on the OLT side, and the debugging print information is as follows:
Huawei(config) 
Can be judged by the query results:
- A . poN port multicast bandwidth is insufficient
- B . The user does not have rights to view program
- C . IGMP version does not match
- D . User bandwidth verification failed
A GPON Type C dual-homing protection is deployed for a power access service, and the status of the protection group and the uplink Ethernet port is set on the OLT. When the status of the Ethernet port associated with the protection group on the OLT becomes down, which of the following description is incorrect?
- A . The status of the work port on the ONU side becomes standby
- B . OLT general ONU uplink status changes
- C . After the switch, the service on the ONU is sent to the OLT through the protect port, that is, the service message is transmitted on the protect link.
- D . ONU detects link failure and triggers protection switching
TypeB protection provides redundant protection for both the OLT PON port and the backbone fiber. When the OLT or OLT PON port or the backbone fiber fails, manually switch to the other optical fiber.
- A . Ture
- B . False
In order to improve link reliability, the LT device configures the Time delay protection group through two uplink ports 0/19/0 and 0/20/0. Which of the following commands is optional?
- A . huawei （ config ） #interface giu 0/ 19
huawei （ config-if-giu-0/19 ） h offline-tx-off-time0500 - B . huawei （ protect-group-0 ） h protect-group member port 0/19/0role work
- C . huawei （ protect-group-0 ） a protect-group enable
- D . huawei （ config ） =protect-group 0 protect-target sth-nni port work mode time delay
When deploying GP ON Type C single-homing protection, which of the following description is correct?
- A . A branch fiber break occurs, and the status of the work port of the OLT becomes standby
- B . The two ports protected on the OLT side cannot send and receive data at the same time
- C . When the olt uplink fails, protection switching can be triggered
- D . The service configuration of ONU access is the same as the configuration before protection
The device will periodically send and receive LMCP packets to avoid information loss. If no packets are received within () LACP packet interaction cycles, the system considers the port to be faulty.
- A . 3
- B . 5
- C . 4
- D . 2
Latest H35-211-ENU Dumps Valid Version with 238 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
