Huawei H19-401_V1.0 HCSP-Presales-Campus Network Planning and Design V1.0 Online Training

Huawei H19-401_V1.0 Online Training

Question #21

In the park scenario, what is correct about the policy linkage function?

A . When the authentication point and the group policy execution point are not on the same device, you need to use the policy linkage function.
B . In the policy linkage scenario, it is necessary to set the downlink port type of the Edge device to an extended access switch.
C . The policy linkage function means that no matter where you go, the permissions to access resources are the same and are decoupled from the IP address.
D . When the authentication point, access point, and group policy execution point are all connected to the access device, the policy linkage function must be used.

Question #22

Which of the following common obstacles has the smallest signal attenuation ()

Question #23

In the LAN-WAN convergence scenario, which is the wrong description of the RR deployment design principles?

A . RR must be configured redundantly, and there must be at least two RR devices in the existing network. Avoid having only one RR device in the entire network. If the RR device fails, the services of the entire network will be interrupted;
B . Try to choose an independent RR. In an independent RR scenario, a single device can be deployed;
C . Use the RR model recommended in the specification list;
D . Edge should be dual uplinked to two RR devices to achieve egress backup;

Question #24

In the CloudCampus solution V1R22CO0 version, the incorrect description of the FW synchronization IP-Group feature is:

A . NCE-Campus supports the configuration of firewall security group policies.
B . When the user is authenticated by NCE-Campus or the permissions change, NCE-Campus synchronizes the username, IP-Group, and IP address information to FW; FW identifies all user groups based on the IP address, user name, and IP-Group mapping relationship. Execute the corresponding security group policy;
C . Reuse the current Internet behavior management process, and add IP-Group information to the synchronization information between NCE-Campus and the firewall.
D . When users come online and age on the FW, the FW actively queries the NCE-Campus server for online users to maintain synchronization of IP-Group and other information at both ends.

Question #25

Campus virtualization solution, the network topology that Underlay routing automation does not support is:

Question #26

The incorrect description of the deployment mode of iMaster NCE – Campus V300R022CO0 version is:

A . In the LAN management scenario, the minimum cluster requires 3 physical servers; it has a distributed 9-node/17-node deployment mode (nodes refer to the number of virtual machines).
B . POL convergence scenario, the minimum cluster requires 3 physical servers; there is no distributed cluster yet.
C . LAN-WAN&POL integration scenario, the minimum cluster requires 3 physical servers; it has a distributed cluster deployment mode.
D . LAN-WAN integration scenario, the minimum cluster requires 3 physical servers; it has a distributed 6-node/9-node/17-node deployment mode (nodes refer to the number of virtual machines)

Question #27

Regarding the NetEngineAR631l device description, the incorrect one is:

Question #28

Regarding the description of V300RO22C10 version NetEngine AR6300 SRG33XO series enterprise router, which is incorrect?

Question #29

Regarding the description of CloudEngineS8700 switch master control, the incorrect one is ()

A . The main control boards of frame 04, frame 06 and frame 10 cannot be shared.
B . The main control does not provide service ports
C . Main control and switching are integrated, centralized architecture, lower switching delay
D . 1:1 active and standby in the frame, packet loss during active and standby switching <5ms

Question #30

S switch V200R022 version, which of the following description about the S5X31(S)-S multi-rate switch is wrong?

A . Supports 2G large cache to cope with high burst business traffic.
B . It can be used as a central switch to support remote modules to achieve minimalist networking.
C . Supports advanced features such as VxLAN and MPLS, Telemetry real-time data collection, and network operation and maintenance visualization; it can be widely used in scenarios such as medium-sized campus aggregation and small campus core.
D . 3 power supply design, supports N+1 yuan, all ports support full supply of 802.3bt 90W PoE++ power supply, the maximum PoE output power of the whole machine can reach 2268W, adapting to the power supply needs of massive terminals.