Huawei H12-831_V1.0-ENU HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Online Training
Huawei H12-831_V1.0-ENU Online Training
The questions for H12-831_V1.0-ENU were last updated at Nov 22,2024.
- Exam Code: H12-831_V1.0-ENU
- Exam Name: HCIP-Datacom-Advanced Routing & Switching Technology V1.0
- Certification Provider: Huawei
- Latest update: Nov 22,2024
In order to support multi-topology functions, which of the following TLVs has been newly added by IS-IS?
- A . TLV No. 229
- B . TLV No. 236
- C . TLV No. 129
- D . TLV No. 232
Which of the following is not a new addition to IS-IS to support IPv6 routing processing and calculation?
- A . TLV 236: describes the reachability of the network by defining routing information prefix, metric value and other information
- B . TLV 232: It is equivalent to the "IP Interface Address" TLV in IPv4, except that the original 32-bit IPv4 address is changed to a 128-bit IPv6 address
- C . When an IPv6 route is advertised externally, the NLPID value must be included
- D . The source IP address of the IS-IS Hello message is changed to the link-local address
In order to support the processing and calculation of IPv6 routes, IS-IS adds a new NLPID in TLV No. 129. NLPID is an 8-bit field that identifies the network layer protocol message. Which of the following is the NLPID value of IPv6?
- A . 232
- B . 236
- C . 142
- D . 204
There are many types of MAC address entries on the switch. Which of the following types of entries can discard messages by matching the source and destination MAC addresses of received messages, thereby filtering out illegal users?
- A . Business MAC address table
- B . Dynamic MAC address table
- C . Static MAC address table
- D . Blackhole MAC address table
The MPLS architecture is divided into a control plane and a forwarding plane, which contains multiple protocols and tables. Which of the following tables is responsible for forwarding packets with MPLS labels?
- A . Label Information Table LIB
- B . Label Forwarding Information Table LFIB
- C . Forwarding Information Table FIB
- D . Routing Information Table RIB
In the network shown in the figure, R1 and R2 establish an EBGP neighbor relationship through a direct interface, and the BFD function is enabled in the BGP process. The BFD parameters are "bfd min-tx-interval 1000 min-rx-interval 1000 detect-multiplier 6". If the IP address of GE0/0/0 on R2 is deleted and the BGP neighbor relationship is checked on R1, which of the following is the longest time for the BGP neighbor relationship on R1 to change from Up to Down?
- A . 0s
- B . 60s
- C . 6s
- D . 180s
If an OSPF router is set as a stub router, which of the following is the link metric in the LSA sent by the router?
- A . 1
- B . 100
- C . 65535
- D . 10
In a BGP/MPLS IP VPN network, VPNv4 routing transfers carry Export RT values. Which of the following path attributes does MP-BGP use to carry Export RT?
- A . AS_Path
- B . Extended_Community
- C . MP_REACH_NLRI
- D . Local_Preference
In a BGP/MPLS IP VPN network, VPNv4 routing transfers carry RD values. Which of the following path attributes does MP-BGP use to carry the RD value?
- A . Extended_Community
- B . AS_Path
- C . MP_REACH_NLR
- D . Local_Preference
When traffic accesses the backbone network, VPN isolation is required. At this time, the interface configuration of a PE router is as follows. If the administrator needs to bind the interface to VPN1 and the interface IP address remains unchanged, which of the following descriptions of the administrator’s operation is correct?
Interface GigabitEthernet 0/0/1
IP address 192.168.100.2 24
- A . After the administrator enters the command ip binding vpn-instance VPN1 in the interface view, it is also necessary to bind the RD value of VPN1
- B . After the administrator types the command ip binding vpn-instance VPN1 in the interface view, he needs to bind the RT value of VPN1.
- C . After the administrator enters the command ip binding vpn-instance VPN1 in the interface view, he needs to reconfigure the interface IP address
- D . The administrator can type the command ip binding vpn-instance VPN1 in the interface view.