Huawei H12-221-ENU HCIP-Routing&Switching-IERS(Huawei Certified ICT Professional-Implementing Enterprise Routing and Switching Network) Online Training
Huawei H12-221-ENU Online Training
The questions for H12-221-ENU were last updated at Nov 22,2024.
- Exam Code: H12-221-ENU
- Exam Name: HCIP-Routing&Switching-IERS(Huawei Certified ICT Professional-Implementing Enterprise Routing and Switching Network)
- Certification Provider: Huawei
- Latest update: Nov 22,2024
In the static LACP mode, the correct description of the active link selection is: (Multiple Choice)
- A . After a member interface is added to the Eth-Trunk in static LACP mode, the member interface sends the information negotiation active port about the system priority, system MAC address, interface priority, and interface number to the peer.
- B . The higher the system LACP priority is, the higher the priority is. At both endsI of the devices, select the system with the larger LACP priority value as the active end. If the system LACP priority is the same, select the one with the higher MAC address as the active end.
- C . The passive end device determines the activity interface based on the active end interface LACP priority and interface ID (interface number).
- D . The interfaces selected by two-end device are inconsistent and the data can be forwarded normally.
Which of the following is the characteristics of the OSPF stub area?
- A . AS-external-LSAs can be published in the Stub area.
- B . The route to the outside of the AS can only be based on a default route generated manually by the ABR.
- C . Virtual connections cannot span the Stub area.
- D . Any area can be a stub area
The route injected into the BGP through the redistributed command has the Origin attribute of Incomplete.
- A . True
- B . False
Which of the following is incorrect about the OSPF protocol?
- A . When a router receives a Network-Summary-LSA, the router runs the SPF algorithm.
- B . Network-LSA is used to describe the link status information of the broadcast network segment and the NBMA network segment.
- C . Virtual connection is a virtual link that belongs to the backbone area (Area 0).
- D . Type-4 LSA is used to describe how to reach the ASBR and contain routing and topology information.
Autonomous System (AS) refers to a set of routers defined by users and using a unified routing policy.
- A . True
- B . False
As shown in the following figure, if you do not want employees of department A have mutual visits, employees in department B can communicate with each other, but different departments cannot communicate with each other, and all employees can access the company’s servers. To achieve this function through the MUX VLAN, the following statement is correct:
- A . VLAN 2 is set to interworking VLAN
- B . VLAN 100 is a slave VLAN
- C . VLAN 3 is set to primary VLAN
- D . VLAN 3 is set to interworking VLAN
About multicast RPF check, which of the following statements is wrong? (Multiple Choice)
- A . Multicast RPF check is not rely on unicast routing.
- B . All multicast protocols use RPF check.
- C . The router receives the multicast packet but fails the RPF check and discards the received multicast packet.
- D . There are two RPF check functions. One is to prevent loops in multicast routes, the other is to prevent forwarding of redundant multicast data packets.
Regarding the description of IGMPv1 and IGMPv2, the correct one is: (Multiple Choice)
- A . IGMPv1 packet type does not include a leave member packets.
- B . IGMPv2 packet type includes member leave packets
- C . IGMPv1 supports universal group queries.
- D . IGMPv2 supports only general group queries.
How many types can the Hello packets of ISIS be divided into? (Multiple Choice)
- A . Level-1 LAN IIH
- B . Level-2 LAN IIH
- C . Level-3 LAN IIH
- D . P2P LAN IIH
When an operating OSPF router receives an LSA and the LSA does not exist in its link state database, how does the router handle this LSA?
- A . The router will silently discard this LSA without returning any messages.
- B . This LSA will be immediately flooded to other OSPF neighbors.
- C . The LSA is installed in its own link state database, and then this LSA is acknowledged by multicast.
- D . Check the age of the LSA to see if it expires.