HPE7-A07

Exhibit. A network administrator attempts to improve multicast traffic flow and performs some packet captures for validation. What can the network administrator conclude from the results?A . The data rate increased from 6 Mops to 300 Mops because Broadcast Multicast optimization (BCMCO) was configured.B . The capture taken after optimization...

Which command would allow you to verity receipt of a CoA message on an AOS 10 GW?A . packet-capture datapath udp 3799B . packet-capture controipath udp 3799C . packet-capture interprocess udp 3799D . tcpdump host-port 3799View AnswerAnswer: B Explanation: The Change of Authorization (CoA) messages are used in network access...

Exhibit. An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency never progresses past the "EXSTART-DR" slate as shown below. Which configuration action on either router will allow R1 and R2 to progress past the "EXSTART/DR" state?A . Change R1 and R2 to a...

You created a new SSID with the security settings shown in the exhibit. Some, but not all users complain that client devices are unable to connect to this SS1D. What is the reason for this?A . The WPA3 Enterprise GCM-2S6 mode does not support transition mode.B . WPA3 Enterprise is...

Exhibit. Which user role will be assigned when a voice client tries to connect for the first time, but the RADIUS server is unavailable?A . CRITICAl_AUTHB . DEFAULT_AUTHC . CRIT1CAL_V0ICED . PRE_AUTHView AnswerAnswer: C Explanation: In the provided configuration for interface 1/1/7, there are roles specified for different scenarios concerning...

Exhibit. Which statement is true?A . The SSID supports HR-DSSS data ratesB . The SSID is supports 6 GHz clients.C . The SSID supports 802 11ax clients.D . The SSID supports 802 11ac clients.View AnswerAnswer: C Explanation: The exhibit shows that the SSID supports 802.11ax clients, which is indicated by...

A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attributes: • MAC address = 81:cd:93:13:ab:31 • LLDP sys-desc = iotcontroller The test device is being assigned to the ‘’lot-dev’' role However, the customer requires the "lot-prod’’ role be applied. Given the configuration,...

You configured" a bridgedmode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates. ClearPass shows the following error. What is needed to resolve this issue?A . Enable authorization in your Authentication Method.B . Recreate the SSID m tunneled mode.C ....

A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attribute: • MAC address=81:cd:93:13:ab:31 The test device needs to be assigned the "lot-prod'' role, in addition the "lot-default" role must be applied for any other device connected lo interface 1/1/1. This is a...

After onboarding three new AOS 10 gateways using the full-setup methodinto the same Central group, a customer cannot log in to one of the gateways using the HPE Aruba Networking Central remote console due to an incorrect password.A . The admin password created using full-setup does not match the global...