If the configuration is correct, which roles will the output show?

Refer to the exhibit. Spanning tree runs on the switches shown in the exhibit. The network administrator enters these two commands: Switch-1(config)# spanning-tree priority 0 Switch-2(config)# spanning-tree priority 1 The other switches use the default spanning tree priorities. The administrator enters the show spanning-treecommand on Switch-2. If the configuration is...

June 2, 2020No CommentsREAD MORE +

What should the network administrator do to permit Switch-1 to route traffic from a client in 10.1.11.0/24 to a client in 10.1.12.0/24?

Refer to the exhibit. What should the network administrator do to permit Switch-1 to route traffic from a client in 10.1.11.0/24 to a client in 10.1.12.0/24?A . Enable proxy ARC . Enable IP routing.D . Configure a static route to 10.1.11.0/24 and a static route to 10.1.12.0/24.E . Enable OSPF...

June 2, 2020No CommentsREAD MORE +

168.1.5

168.1.5. B. On Switch-1, Switch-2, and Switch-3, change the next hop in each static route to specify an IP address that exists on that switch. C. On Switch-1, raise the administrative distance for the second route to 192.168.3.0/24; on Switch-2, raise the administrative distance for the second route to 192.168.2.0/24...

June 2, 2020No CommentsREAD MORE +

What should the administrator do to accomplish this?

A network administrator configures MSTP on an ArubaOS switch. The administrator wants to ensure that this switch is always the root for instance 1. What should the administrator do to accomplish this?A . Specify priority 15 for spanning tree instance 1.B . Specify spanning tree cost 0 on all switch...

June 2, 2020No CommentsREAD MORE +

Which type of 802.11 wireless network can be hosted by an endpoint device such as a laptop?

Which type of 802.11 wireless network can be hosted by an endpoint device such as a laptop?A . a wireless distribution systemB . an ad hoc networkC . a wireless mesh or bridgeD . an infrastructure networkView AnswerAnswer: B

June 1, 2020No CommentsREAD MORE +

Where should the network administrator configure an IP helper address of 10.1.1.10?

Refer to the exhibit. All of the switches shown in the exhibit are ArubaOS switches. Where should the network administrator configure an IP helper address of 10.1.1.10?A . on VLAN 2 on Switch-1B . on VLAN 2 on Switch-3C . on VLAN 1 on Switch-1D . on VLAN 1 on...

May 30, 2020No CommentsREAD MORE +

Where are these requests received?

Refer to the exhibit. Endpoint A sends broadcast ARP requests. Where are these requests received?A . at EndpointCB . at EndpointBC . at EndpointB, at EndpointC, and at EndpointDD . at EndpointB and at EndpointCView AnswerAnswer: A

May 30, 2020No CommentsREAD MORE +

Which links can be combined in the same link aggregation?

Refer to the exhibit. Which links can be combined in the same link aggregation?A . Links 3 and 4B . Links 3 and 5C . Links 3 and 6D . Links 4 and 6View AnswerAnswer: A Explanation: We can also aggregate link 5 and 6

May 29, 2020No CommentsREAD MORE +

What is the relationship between a wireless client’s data rate and the throughput for the client’s traffic?

What is the relationship between a wireless client’s data rate and the throughput for the client’s traffic?A . The throughput is 90 percent of the data rate.B . The throughput is equal to the data rate multiplied by the connection time, minus the headers’ bytes.C . The throughput is less...

May 28, 2020No CommentsREAD MORE +

Which privilege level would a network administrator use to configure an ArubaOS switch?

Which privilege level would a network administrator use to configure an ArubaOS switch?A . AdministratorB . ManagerC . SuperD . UserView AnswerAnswer: B

May 28, 2020No CommentsREAD MORE +