HP HPE7-A01 Aruba Certified Campus Access Professional Exam Online Training
HP HPE7-A01 Online Training
The questions for HPE7-A01 were last updated at Dec 19,2024.
- Exam Code: HPE7-A01
- Exam Name: Aruba Certified Campus Access Professional Exam
- Certification Provider: HP
- Latest update: Dec 19,2024
What is an OSPF transit network?
- A . a network that uses tunnels to connect two areas
- B . a special network that connects two different areas
- C . a network on which a router discovers at least one neighbor
- D . a network that connects to a different routing protocol
Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?
- A . Hybrid Mode
- B . Air Monitor
- C . Spectrum Monitor
- D . Dual Mode
You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration How should you establish the keepalive connection?
- A . SVI, VLAN trunk allowed all on ISL in default VRF
- B . routed port in custom VRF
- C . loopback 0 and OSPF area 0 in default VRF
- D . SVI, VLAN trunk allowed all on ISL in custom VRF
Which method is used to onboard a new UXI in an existing environment with 802 1X authentication? (The sensor has no cellular connection)
- A . Use the UXI app on your smartphone and connect the UXI via Bluetooth
- B . Use the Aruba installer app on your smartphone to scan the barcode
- C . Connect the new UXI from an already installed one and adjust the initial configuration.
- D . Use the CLI via the serial cable and adjust the initial configuration.
How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?
- A . "The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients
- B . When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz
- C . The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.
- D . The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.
You need lo have different routing-table requirements with Aruba CX 6300 VSF configuration Assuming the correct layer-2 VLAN already exists how would you create a new OSPF configuration for a separate routing table?
- A . Create a new OSPF area, and attach VRF name.
- B . Create a new OSPF process ID with vrf name.
- C . Attach a new OSFP process ID with a custom routing table
- D . Attach OSPF process ID in the VRF configuration.
A customer has a large number of food-producing machines
* All machines are connected via Aruba CX6200 switches in VLANs 100.110. and 120
* Several external technicians are maintaining this special equipment
What are the correct commands to ensure that no rogue DHCP server will impact the network?
A)
B)
C)
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
In an ArubaOS 10 architecture using an AP and a gateway, what happens when a client attempts to join the network and the WLAN is configured with OWE?
- A . Authentication information is not exchanged
- B . The Gateway will not respond.
- C . No encryption is applied.
- D . RADIUS protocol is utilized.
Describe the difference between Class of Service (CoS) and Differentiated Services Code Point (DSCP).
- A . CoS is only used to determine CLASS of traffic DSCP is only used to differentiate between different Classes.
- B . CoS is only contained in VLAN Tag fields DSCP is in the IP Header and preserved throughout the IP packet flow
- C . They are similar and can be used interchangeably.
- D . CoS has much finer granularity than DSCP
A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working across the campus which is connected via layer-3. The legacy devices are connected to Aruba CX 6300 switches throughout the campus.
Which technology minimizes flooding so the legacy application can work efficiently?
- A . Generic Routing Encapsulation (GRE)
- B . EVPN-VXLAN
- C . Ethernet over IP (EolP)
- D . Static VXLAN