HP HPE6-A41 Applying Aruba Switching Fundamentals for Mobility Online Training
HP HPE6-A41 Online Training
The questions for HPE6-A41 were last updated at Nov 22,2024.
- Exam Code: HPE6-A41
- Exam Name: Applying Aruba Switching Fundamentals for Mobility
- Certification Provider: HP
- Latest update: Nov 22,2024
Refer to the exhibit.
The network consists of two ArubaOS switches with routing disabled.
How should the network administrator configure the link between Switch A and Switch B to ensure that all hosts can communicate to all the other hosts within their respective VLANs?
- A . tagged for VLAN 20 and tagged for VLAN 30
- B . untagged for VLAN 10 and tagged for VLAN 30
- C . tagged for VLAN 10 and tagged for VLAN 20
- D . untagged for VLAN 10, untagged for VLAN 20, and tagged for VLAN 30
A company has ArubaOS switches that are already configured to support the network. The company now wants to use Aruba AirWave to manage the switches. The network administrator creates a new group on Aruba AirWave, and then discovers several ArubaOS switches that should belong to this group.
What is the best practice for the initial authorization of the switches in AirWave?
- A . Authorize the switches in Monitor + Firmware Updates only mode.
- B . Authorize the switches and immediately change the scan set credentials to match the credentials on the switches.
- C . Authorize the switches and immediately change the global communication settings to match the credentials on the switches.
- D . Authorize the switches in Managed Read/Write mode.
Refer to the exhibit.
A company has an existing Aruba Instant cluster with several Instant APs (IAPs), as shown in the exhibit. The network administrator orders a new IAP and boots it for the first time by connecting it to the PoE switch port shown in the exhibit.
What happens after the IAP boots?
- A . The IAP attempts to contact AirWave. If it is able to reach AirWave and obtain the current VC (master) IP address, it joins the cluster.
- B . The IAP fails to join the cluster because the administrator has not yet connected to its Instant SSID and provisioned it.
- C . The IAP undergoes an election process with the current VC (master). It takes the VC role if it has a higher MAC address unless the current VC is configured as the preferred VC.
- D . The IAP hears the messages from the current VC (master), and it joins the cluster without the occurrence of a new election.
A network administrator configures MSTP on an ArubaOS switch. The administrator wants to ensure that this switch is always the root for instance 1.
What should the administrator do to accomplish this?
- A . Specify priority 15 for spanning tree instance 1.
- B . Specify spanning tree cost 0 on all switch ports that connect to other switches that use instance 1.
- C . Specify priority 0 for spanning tree instance 1.
- D . Specify spanning tree cost 15 on all switch ports that connect to other switches that use instance 1.
A retail company needs a quick way to deploy network infrastructure to new sites.
Which Aruba solutions provide Zero Touch Provisioning (ZTP) for Aruba Instant APs (IAPs) and ArubaOS switches?
- A . Aruba AirWave and Aruba Activate
- B . Aruba Meridian and Aruba ALE
- C . Aruba AirWave and Aruba Central
- D . Aruba Activate and Aruba Meridian
Refer to the exhibit. Exhibit 1.
Exhibit 2.
The administrator enters the show spanning-treeinstance 2 command on Switch-3 and sees the output shown in Exhibit 2.
What could explain the output results?
- A . Switch-1 has a lower MAC address than Switch-2.
- B . Switch-1 has a higher MAC address than Switch-2.
- C . Switch-3 filters BPDUs on port 26.
- D . Switch-3 has incompatible MSTP region settings with other switches.
Managers log in to an ArubaOS switch with SSH.
What does SSH require to authenticate the switch to the SSH client and set up a secure session?
- A . an SSH authorized user key, managed by the ip ssh public-key commands
- B . a username and password set with the password manager command
- C . an SSH key, managed by the crypto key sscommands.
- D . a self-signed certificate configured with the crypto key commands
A network administrator needs to configure a link aggregation on an ArubaOS switch.
For which type of link aggregation is the administrator required to enter the lacp command in the interface context?
- A . a distributed LACP link aggregation
- B . a dynamic LACP link aggregation
- C . a static LACP link aggregation
- D . a manual LACP link aggregation
Refer to the exhibit.
Spanning tree runs on the switches shown in the exhibit.
The network administrator enters these two commands:
Switch-1(config)# spanning-tree priority 0
Switch-2(config)# spanning-tree priority 1
The other switches use the default spanning tree priorities. The administrator enters the show spanning-treecommand on Switch-2.
If the configuration is correct, which roles will the output show?
- A . A1 = Designated A2 = Alternate A3 = Alternate
- B . A1 = Root A2 = Designated A3 = Designated
- C . A1 = Designated A2 = Designated A3 = Designated
- D . A1 = Root A2 = Alternate A3 = Alternate
Refer to the exhibit.
The network administrator enters this command:
Switch(config)# ip route 172.16.2.0/30 192.168.1.100 metric 1 distance 1
Why does this route fail to appear in the IP routing table?
- A . Its prefix length is invalid.
- B . Its next hop is unreachable.
- C . Its administrative distance is the same as an existing static route.
- D . Its metric is the same as an existing static route.
Latest HPE6-A41 Dumps Valid Version with 125 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
