What is the earliest Server generation supported in HPE OneView for Secure Boot configuration within the Server Profile Template?
- A . Gen7
- B . Gen9
- C . Gen10
- D . Gen8
Your customer reports receiving an error after re-configuring some uplink sets. The error states that their Logical Interconnects are non-compliant with the Logical Interconnect Group.
What must they do to clear this error?
- A . Delete the affected Logical Interconnect Group and recreate it.
- B . Go to HPE OneView Dashboard to acknowledge the error.
- C . Update the Enclosure Group configuration with the new uplink set information.
- D . Go to Logical Interconnect and select "update" from the group options.
You need to add an HPE ProLiant DL380 Gen10 server to the HPE OneView appliance for monitoring.
Which information is required to complete this task? (Choose two.)
- A . HPE OneView Advanced license
- B . firmware baseline
- C . iLO IP address
- D . Enclosure Group name
- E . iLO credentials
Which enhanced security feature is unavailable within HPE OneView?
- A . configure firewall rules
- B . role-based access control
- C . two-factor authentication
- D . SNMP v3
A customer has a strict change control environment.
How do Server Profile Templates help with change control policies?
- A . They allow users to define configurations once and within minutes.
- B . They help to monitor, flag, and update server profiles in HPE OneView.
- C . They allow server profile mobility.
- D . They provision hardware quickly.
You are designing a new deployment consisting of HPE Proliant Gen10 rack servers and a Nimble storage array.
Which data protection method is recommended to back up and be able to restore your appliance in case of a catastrophic failure?
- A . Create regular backup files and store them to an off-appliance location
- B . Deploy two virtual appliance and enable synchronous replication
- C . Perform regular Snapshot of the virtual appliance on the HPE Nimple array.
- D . Configure automatic VMware snapshot of the virtual appliance.
DRAG DROP
Match the minimum HPE OneView license required to each function. (Matches may be used more than once.)
An administrator selected “firmware and OS drivers using smart update tools” when
installing a new HPE Service pack for ProLiant.
Which statement are true for the is administrator environment?
- A . Customer will be automatically detected and updated simulteniously.
- B . By default only a new version of firmware/drivers will be installed
- C . Firmware and OS drivers will always start immediately to be as fast as possible.
- D . Firmware and OS drivers are updated without powering off the server hardware
You remove an HPE SY480 compute module from its bay and install a host bus adapter (HBA) into the compute module. When you install the module back into its original bay you notice that the server profile in HPE OneView is showing “unassigned”.
What is the reason for this?
- A . There is no connection configured for the HBA in the “Connections” section of the Server profile.
- B . The server hardware type is invalid.
- C . The Server Profile is inconsistent with its Server Profile Template.
- D . The Affinity is configured to “Device bay + hardware”.
When creating a Server Profile Template, what are advantages or creating an unassigned Ethernet type connection during template creation? (Choose two.)
- A . It enables auto-zoning of SAN connections
- B . It avoids re-enumeration when assigning a network to existing connections
- C . It eliminates the need to power off the server when adding connectivity to the production networks or disabling a profile connection
- D . Template creation is the only time that new network adapters can be created
After assigning a server profile to an HPE ProLiant blade, you notice that the serial number being reported on the server profile page is not the one that matches the label on the server.
You want the reported serial number to match the label.
What do you need to do?
- A . Create a new Server Profile and go to the “Advanced” section, then change the radio button for the serial number/UUID from “Virtual” to “Physical” and apply it to the server.
- B . Edit the Server Profile and go to the “Advanced” section, then change the radio button for serial number/UUID from “Virtual” to “Physical”.
- C . Create a new Server Profile Template and go to the “Advanced” section, then change the radio button for the serial number/UUID from “Virtual” to “Physical”.
- D . Edit the Server Profile and go to the “Advanced” section, then change the radio button for serial number/ UUID from “Virtual” to “Physical” and enter the serial number.
HOTSPOT
Click where the server administrator can see the server profiles using the selected firmware Bundle.
A customer need to check wheather shared infrastructure and Gen10 servers are aligned with SPPs available in the oneview repositories.
Which HPE oneview functionality can be used to fulfill the customer requirements?
- A . Server hardware report
- B . Firemware compliance report
- C . Health check
- D . Firmware repository
A customer would like to apply a server profile to the server in the exhibit.
What is the first action they must take to successfully apply the server profile?
- A . Apply the correct HPE OneView license
- B . Power off the server
- C . Click on the server hardware type.
- D . Click on the create profile hyperlink.
What are Benefits of using HPE OneView along with 3rd Party integrations? (Select two)
- A . Standardized templates to optimize industry standard applications
- B . Faster application development
- C . Simplified Infrastructure lifecycle operations
- D . Integrated management of 3rd Party software licenses
- E . Extensive management of 3rd Party server and storage devices
Which statement is true about consistency checks between the server profile template and its corresponding server profiles?
- A . A server profile must always fulfill the minimum specifications jn its server profile template.
- B . You can have different consistency checking levels within a server profile.
- C . Server profiles can combine consistency checks from multiple server profile templates
- D . Consistency checking is enabled for a complete server profile.
A customer has a single BladeSystem environment running Virtual Connect and VMware ESXi. The customer wants to manage the enclosure with HPE OneView.
What must the customer consider?
- A . The Management Ring cannot talk to the production VLAN.
- B . The HPE OneView appliance cannot reside in an enclosure it manages.
- C . Virtual Connect Enterprise Manager (VCEM) is not supported with VMware.
- D . HPE OneView for VMware vCenter is licensed separately at an additional cost.
Which feature of HPE OneView for VMware vCenter enables you to create additional nodes for an existing environment?
- A . REST API
- B . VMware autodeploy
- C . Image Streamer
- D . Grow Cluster
DRAG DROP
Match the HPE OneView interconnect module state to its definition.
Explanation:
Network Set
Logical Interconnect
Logical Interconnect Groups
Enclosure Group
Refer to the exhibit.
A solution architect is setting up a Synergy configuration for a customer. The customer wants their redundancy level to be Highly Available.
What is preventing this option from being available for the customer?
- A . Synergy doesn’t support an HA fabric configuration on the Virtual Connect SE 40GB F8 module for Synergy.
- B . HA is not supported in Interconnect Bay set 3.
- C . HA requires multiple frames in the fabric domain.
- D . HA is only supported in mixed speed environments.
Which attributes are required to create a blade server profile? (Choose two.)
- A . BIOS settings
- B . Enclosure Group
- C . local storage configuration
- D . uplink set
- E . server hardware type
A,C
Explanation:
You can assign an unassigned profile only to server hardware that matches the server hardware type and enclosure group. After the profile is created, you cannot change the server hardware type and enclosure group.
A server administrator is integrating HPE OneView authentication with Active Directory and needs to add read-only access to members of a domain group.
Which steps are part of the procedure? (Choose two.)
- A . Add the domain group in Users and Groups menu.
- B . Define the Active Directory domain and associated directory server(s) in Directory settings.
- C . Add the domain group as Base DN in Directory settings.
- D . Add the domain group as Organization Unit in Directory settings.
- E . Add the Active directory server in Users and Groups menu.
A customer has a mixture of Gen8 and newer DL and BL devices. They want to enable support automation and run inventory reports on their devices. They are currently using Insight Control but are considering HPE OneView. They can’t have any downtime on the devices if they change management strategies.
What option is most efficient for them?
- A . Move to HPE OneView Advanced with Remote Support enabled.
- B . Move to HPE OneView Standard with Remote Support enabled.
- C . Stay on Insight Control and activate a Proactive Care contract.
- D . Stay on Insight Control and enable Insight Online.
You want to create a Support Dump file using REST: How would you accomplish this?
- A . POST /rest/backups/support-dumps
- B . PUT /rest/appliance/support-dumps
- C . GET /rest/appliance/support-dumps
- D . POST /rest/appliance/support-dumps
A customer plans to deploy HPE OneView to an existing group of HPE Blade System c7000 and HPE ProLiant Servers.
What does the customer need to purchase in order to manage their environment through HPE OneView?
- A . HPE OneView License
- B . HPE OneView Appliance
- C . HPE iLO Advanced Licenses
- D . HPE Synergy Composer
What types of activities can be displayed in the Activity section of the HPE OneView UI? (Choose two.)
- A . tasks
- B . alerts
- C . connections
- D . deployments
- E . email notifications
What does HPE OneView use to define the network connectivity for an Enclosure Group?
- A . Logical Switch Group
- B . Logical Interconnect Group
- C . Smart Link
- D . network set
Which statements about hypervisor cluster profile are true? Select two.
- A . Hypervisor cluster profiles can only be used with hpe synergy image streamer
- B . There can only be one type of hypervisor in the cluster
- C . A hypervisor cluster profile needs a server profile template
- D . The type of hypervisor used will be detected automatically
- E . A hypervisor cluster can be expanded but cannot be shrunk.
Synergy Composer enables remote support of which components? (Choose two.)
- A . HPE Onboard Administrator
- B . HPE Virtual Connect FlexFabric-20/40 F8 Module
- C . HPE Synergy D3940 storage module
- D . HPE Synergy 12000 frames
- E . HPE Synergy compute modules
For multiple events to be identified as an SNMP trap storm, what criteria must the traps meet? (Choose three.)
- A . have the same trap identifier
- B . are within 1 second of the previous event
- C . have the same hostname
- D . are from the same device
- E . originate from the same MAC addresses
- F . have the same number of variable string values
What is the best place to find installed firmware for all systems managed by HPE OneView?
- A . HPE Service Pack for HPE ProLiant
- B . HPE OneView predefined reports
- C . HPE Insight Online
- D . HPE OneView for Microsoft System Center
A server administrator is integrating HPE OneView authentication with Active Directory and needs to add read-only access to members of a domain group.
Which step is part of the procedure?
- A . Add the domain group as Organization Unit in Directory settings.
- B . Add the domain group as Base DN in Directory settings.
- C . Define the Active Directory domain and associated directory server(s) in Directory settings.
- D . Add the Active Directory server in Users and Group menus.
DRAG DROP
For each REST API operation, match the appropriate HTTP method to accomplish each task.
A customer has HPE OneView 1.2 and wants to upgrade to 4.0.
What is the correct procedure?
- A . import all virtual connect manager environments and then upgrade directly to 4.0
- B . upgrade directly to 4.0
- C . upgrade to 3.1, import all virtual connect manager environments, then upgrade to 4.0
- D . upgrade to 3.1 and then upgrade to 4.0
What tool provides a unified view of aggregated information from multiple OneView appliances?
- A . Redfish management
- B . Intelligent Management Console
- C . Global Dashboard
- D . Integrated Lights Out
A server administrator using the REST API is troubleshooting the error seen in the exhibit.
What needs to be fixed in the command?
- A . add the missing authentication token to the header
- B . change http to https in the URL
- C . change the POST method to PUT
- D . change the "login-sessions" string in the URL to "login-session"
Which HPE tool can be integrated with HPE OneView to provision ToR switch ports automatically for newly added BladeSystem enclosures?
- A . StoreServ Management Console
- B . Synergy Composer
- C . Onboard Administrator
- D . Global Dashboard
- E . Intelligent Management Console
Which parameter does the server profile assign to a Flex-10 adapter in a blade server profile?
- A . MAC address
- B . Hardware iSCSI initiator name
- C . WWN
- D . iLO IP address
a customer requires a report containing firmware revision of interconnect module across their blade system and synergy enclosures.
Which management solution should you recommend?
- A . iLO amplifier pack
- B . HPE OneView Global dashboard
- C . HPE OneView for VMware vcenter
- D . HPE OneView virtual appliance
A customer is trying to upload an additional SPP to the OneView appliance. But receives an error message staging that there is not enough internal space available.
What can the customer on the appliance to enable the upload?
- A . Present an additional disk drive
- B . Attach an external USB drive
- C . Enable compression for SPPs
- D . Add a web server an external repository
What tool can you use to provision hosts using server profiles to create or grow a Hyper-V cluster?
- A . HPE Insight Control Server Provisioning
- B . HPE OneView for Microsoft System Center
- C . HPE iLO Virtual Media
- D . Microsoft Operations Manager
What does the HPE oneview global dashboard provide?
- A . Extends the unified management view across all of your data center
- B . Offer the ability to manage non-hpe devices
- C . Adds a layewr of security beyond what hpe oneview delivers on its own.
Which parameter is required in the HTTP header of every single REST API call after successful login?
- A . Accept-Chrset:{charset}
- B . If-Match:{eTage}
- C . Content-Type:{media-type};{charset}
- D . Auth:{session-token}
Refer to the exhibit.
What is the PowerShell command to create an Ethernet Network resource?
- A . New-HPOVNetwork -Name "ProdNet 100" -Vlanld 100
- B . New-HPOVuplinkSet -Name "ProdNet 100" -Networks (Get-HPOVNetwork -Name "ProdNet 100")
- C . Get-HPOVNetwork -Name "ProdNet 100" | New-HPOVServerProfileConnection -ConnectionID 1 -Name "ProdNet 100"
- D . New-HPOVNetworkSet -Name "ProdNet 100"
What type of default certificate is automatically generated in an HPE OneView appliance?
- A . no certificate is pre-installed
- B . CA generated
- C . self signed
- D . PKI
Which Action is required to enable automated SAN zoning with HPE oneview 5.x and FC switches
- A . Add supported SAN manager
Your customer would like to manage HPE BladeSystems and some rack servers using HPE OneView and is concerned about system availability.
How should you respond to this concerned customer?
- A . HPE OneView has a built-in high availability mechanism that can be enabled with an additional license
- B . HPE Global Dashboard can be used to enable HPE OneView high availability
- C . HPE OneView can be deployed to a hypervisor cluster to provide high availability
- D . HPE OneView can be connected to two different databases to provide high availability
Which functionality is enabled when a supported SAN Manager is added to HPE OneView?
- A . local storage management
- B . VSA monitoring
- C . storage replication
- D . automated zoning
HOTSPOT
A server administrator needs to expand a VMware vSphere farm and use an already existing server profile as a baseline. Click the area where new server profile templates can be created from a selected server profile.
A customer plan to manage their HPE Blade System c7000 enclosure using HPE OneView.
What information is required to add the enclossure to the HPE onvew appliance. Serlect 2
- A . Gateway address
- B . OA Credentials
- C . iLO IP Address
- D . Enclossure Group
- E . DNS server address
How does HPE OneView simplify infrastructure management? (Choose two.)
- A . Provides unified platform that supports management across compute, storage, and fabric
- B . Provides industry leading infrastructure security through hardware root of trust
- C . Manages physical servers and virtual machines
- D . Provides integrations with 3rd party infrastructure automation tools through an API driven interface
What functionality does Storm Control provide in HPE OneView?
- A . Prevents malware from hiding embedded code in the network traffic.
- B . Prevents network performance degradation by suppressing excessive inbound broadcasts.
- C . Prevents duplicate MAC addresses and WWNs from occurring in HPE OneView.
- D . Prevents resource exhaustion on the switch by throttling data flow on network interfaces.
B
Explanation:
Storm Control is a new feature that allows network admin to suppress excessive inbound multicast, broadcast, and destination lookup failure (DLF) packets when user specified threshold is reached
Which HPE OneView features are used by the HPE OneView for VMware vCenter plugin to simplify the process of deploying a complete vSphere cluster? (Choose two.)
- A . Smart Update Manager
- B . PowerShell Library
- C . Intelligent Provisioning
- D . Server Profile Templates
- E . REST API
What is the eTag attribute of resource objects used for?
- A . to identify the version of the IP protocol
- B . to identify the current revision of the resource
- C . to identify the server in a bay
- D . to identify the server profile assigned to a bay
Which HPE product would you recommend to a customer who is running multiple HPE OneView appliances and Hyper Converged Systems to monitor their entire environment in a single application?
- A . Insight Control
- B . Central Management Console
- C . iLO Amplifier Pack
- D . Global Dashboard
Before applying server profiles to a group of servers.
What is the first thing you should check?
- A . The servers are powered down.
- B . The servers have the correct firmware installed.
- C . The servers are all Synergy compute modules.
- D . The servers are all the same server hardware type.
DRAG DROP
Match the HPE OneView interconnect module state to its definition.
Which security feature would you configure to delegate responsibility for a subset of resources to a junior administrator group?
- A . No Password for admin account
- B . RBAC (Role Based Access Control)
- C . SBAC (Scope Based Access Control)
- D . CLl Only Access
A customer is trying to upload an additional SPP to the oneview appliance, but receives an error message stating that there is not enough internal space available.
What can the customer change on the appliance to enable the upload?
- A . Add a web server as an external respository
What is required for a user to authenticate to an HPE OneView appliance configured for
two-factor authentication?
- A . Smartcard
- B . Self-signed certificate
- C . SMS
- D . One-time Passwords
The administrator has configured Server Profile Templates to use Virtual serial numbers.
Where can you go in HPE OneView to see hardware-based serial numbers? (Choose two.)
- A . Server Profile Templates page
- B . Server Hardware page
- C . Server Profile page
- D . Server Hardware Types page
- E . Reports > Server inventory page.
How would you export a list of only the active alerts within the HPE OneView?
- A . Download the HPE oneview audit log.
- B . Use standerd report from the report section
- C . Select the activity view and check the alerts.
- D . Create a customer report for active alerts.
A customer has deployed the HPE OneView virtual appliance and is getting an error message when they attempt to import a Synergy frame for management.
What is the most likely cause of the problem?
- A . Synergy frames require additional HA requirements for the virtual appliance.
- B . Synergy frames are managed by the HPE Composer.
- C . The backup IPv6 address of the Frame Link module was used during the import.
- D . The HPE OneView virtual appliance has the wrong database size.
A customer is concerned about the security of their backups.
Which feature of HPE Onview backups will help address the customer concerns?
- A . Backup utilize an external key manager
- B . Backups are automatically encrypted
- C . Backups are protected with two-factor authentication.
- D . Backup require complex passwords.
Which REST API headers are recommended when creating a new Ethernet network? (Choose two.)
- A . Content-Type
- B . X-API-Version
- C . Accept-Language
- D . Accept-CharSet
In HPE OneView, which server profile attributes are configurable on HPE ProLiant server blades but not on HPE ProLiant rack servers? (Choose two.)
- A . Boot order
- B . SAN storage
- C . BIOS settings
- D . Local storage
- E . FlexNICs and FlexHBAs
DRAG DROP
Match each task or environment with the most common approach for using HPE OneView. (Matches may be used more than once.)
Your environment consists of HPE Proliant rack servers and an HPE 3PAR StoreServ array. The HPE OneView appliance running on an ESXi hypervisor had a catastrophic failure.
What recovery method should you choose to restore your appliance?
- A . Restore virtual appliance from the latest VMware snapshot.
- B . Restore virtual appliance from the most recent RMC-V copy.
- C . Restore virtual appliance from the most recent backup file.
- D . Restore virtual appliance from the latest 3PAR snapshot.
C
Explanation:
You can recover from a catastrophic failure by restoring your appliance from the backup file.
How can a server administrator present a 3PAR volume to the server managed by HPE OneView?
- A . in the volume properties
- B . in the CPG configuration
- C . through supported SAN manager
- D . using a server profile
Where can an administrator display the API communication traffic in order to develop automation scripts?
- A . Remote Desktop
- B . Web Browser
- C . VNC session
- D . Terminal Window.