During an initial setup of a Synergy environment, an integrator needs to enable or disable authorized Service access.
What will be the outcome when the integrator disables this service?
- A . Authenticated administrators will be unable to make changes to the system
- B . Authorized users will be unable to generate a support dump
- C . Authenticated administrators will be unable to access the system
- D . Authorized support will be unable to diagnose the system
D
Explanation:
Reference: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05098314 (62)
FILL BLANK
A customer has the following configuration:
Frame 1
– Bay 1 C HPE Synergy 12Gb SAS Connection Module
– Bay 2
– Bay 3 C HPE Virtual Connect SE 40 GB F8 Module
– Bay 4 C HPE Synergy 12GB SAS Connection Module
– Bay 5
– Bay 6 C HPE Synergy 10 Gb Interconnect Link Module
Frame 2
– Bay 1 C HPE Synergy 12Gb SAS Connection Module
– Bay 2
– Bay 3 C HPE Synergy 10Gb Interconnect Link Module
– Bay 4 C HPE Synergy 12Gb SAS Connection Module
– Bay 5
– Bay 6 C HPE Virtual Connect SE 40Gb F8 Module
How many more frames can the customer add to their Synergy composable fabric? (Note: Enter your answer in the answer field below.)
Frame 1 C Bay 2 C HPE Virtual Connect SE 100Gb F32 Module for Synergy (867796-B21)
Frame 1 C Bay 5 C HPE Virtual Connect SE 16Gb Fibre Channel Module for Synergy (779227-B21)
Frame 2 C Bay 2 C Brocade 16Gb/24 Power Pack+ Fibre Channel SAN Switch Module for HPE Synergy (K2Q86A)
Frame 2 C Bay 5 C HPE Synergy 4820C 10/20/25Gb Converged Network Adapter (876449-B21)
In a 3-frame HPE Synergy environment, how should an integrator place the image Streamer modules to allow for redundancy to all of the management connections?
- A . one Image Streamer module in frame 2, and a second Image Streamer Module in frame 3 (2 total)
- B . two Image Streamer modules in frame 2, and two Image Streamer modules in frame 3 (4 total)
- C . one Image Streamer module in each Synergy frame (3 total)
- D . two Image Streamer modules in frame 1 (2 total)
B
Explanation:
Reference: https://www.karma-group.ru/upload/iblock/2be/synergy_image_streamer.pdf (page 7)
What must an integrator do before an existing cluster can be imported to the HPE Composer?
- A . The vCenter Server must be integrated with the HPE Composer
- B . The cluster must be vSAN enabled
- C . The HPE Composer must have at least two management interfaces to connect to the cluster
- D . The cluster must be enabled for HPE Composer integration
Refer to the exhibit.
How should an integrator pair interconnect bays to set up redundant fabrics in an HPE Synergy 12000 Frame?
- A . Interconnect bays 1 and 2; bays 3 and 4; bays 5 and 6.
- B . Interconnect bays 1 and 6; bays 2 and 5; bays 3 and 4.
- C . Interconnect bays 1 and 4; bays 2 and 5; bays 3 and 6.
- D . Interconnect bays 1 and 3; bays 2 and 4; bays 5 and 6.
C
Explanation:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815113.pdf
Refer to the exhibit.
An integrator needs to add an FCoE connection to the server profile, but the FCoE connection type is not available.
What is the likely cause of this issue?
- A . FCoE capable interconnect modules are not installed in the Synergy frame
- B . Defined FCoE network is not associated with a SAN or does not have VLAN Id defined
- C . A FCoE connection is not available, as there is no LIG configured for FCoE connectivity
- D . The FCoE connection has not been added as a Fibre Channel connection within a server profile
An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames.
Which configuration steps must the integrator perform to provide the customer with this functionality?
- A . Enable Remote Support and Insight Online Integration in the Composer UI
- B . Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard
- C . Configure OneView with iLO Amplifier pack
- D . Activate iLO Federation on all installed compute nodes
What are valid uses for an IPv4 address pool when configuring an HPE Synergy solution? (Choose two.)
- A . assignment of IP addresses for NICs in an operating system
- B . assignment of IP addresses for Composer appliances
- C . assignment of IP addresses for PXE booting to a deployment server
- D . assignment of IP addresses for interconnect modules
- E . assignment of IP addresses for iLOs
DE
Explanation:
Reference: https://techlibrary.hpe.com/docs/synergy/shared/setup_overview/index.html
HOTSPOT
A customer has the following HPE Synergy solution:
– three Synergy frames
– two HPE Virtual Connect SE 32Gb Fibre Channel (FC) modules in each time
– two HPE Virtual Connect SE 40GB F8 modules
– four HPE Synergy 10Gb Interconnect Link Modules
Click the menu option the integrator should use to add more uplinks ports from HPE Virtual Connect SE 32 Gb FC modules to SAN uplink set.
Explanation:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815258.pdf
Which policy can an integrator apply when creating a datastore using HPE OneView for vCenter Server?
- A . Data at Rest encryption policy
- B . Round Robin load balancing policy
- C . Recovery Manager Central policy
- D . virtual machine Restart policy
An integrator prepares deployment documents with the list of all the hardware and software components. The integrator also needs a list of all infrastructure services deployed, with the functionality described.
Which services are provided by the vCenter Server component and should be placed in the report? (Choose two.)
- A . Auto Deploy
- B . Single Sign-On
- C . Update Manager
- D . Lookup Service
- E . Certificate Authority
A customer needs to evaluate Image Streamer as Proof-of-Concept (PoC) in a test and development tab environment.
At a minimum, what does a Synergy integrator need in order to support this requirement?
- A . a three-frame environment with redundant composer and Image Streamer appliances
- B . a single frame with single composer and Image Streamer appliances
- C . a two-frame environment with single composer and Image Streamer appliances
- D . a single frame with redundant Image Streamer appliances
Which component of the HPE Synergy solution should you use to set the firmware/driver baseline and the installation method for Synergy Compute nodes?
- A . Composer
- B . Smart Update
- C . Image Streamer
- D . Global Dashboard
B
Explanation:
Reference: https://support.hpe.com/hpsc/doc/public/display?docId=c05212310
Which storage solution can be used for volume provisioning using HPE Composer?
- A . MSA 2040
- B . HPE StoreEasy 1560
- C . HPE 3PAR StoreServ
- D . HPE XP7 Storage
C
Explanation:
Reference: https://www.karma-group.ru/upload/iblock/30b/hpe_synergy_composer.pdf
What is the purpose of the OmniStack Accelerator card installed in HPE SimpliVity platform?
- A . It performs inline data efficiency processing and deduplication
- B . It provides very fast SSD capacity for demanding workloads
- C . It provides graphic acceleration for VDI infrastructure
- D . It accelerates CPU processing within a virtual machine
B
Explanation:
Reference: https://assets.ext.hpe.com/is/content/hpedam/documents/a00026000-6999/a00026728/a00026728enw.pdf
A customer needs to deploy a farm of Windows Server 2019 Hyper-V using an Image Streamer. The customer discovered that the OS Build Plan for this OS is not available from the Image Streamer interface.
How can the customer access all the tools and scripts needed to provision the required operating system?
- A . The customer has to update Image Streamer firmware, as with the new firmware all OS Build Plans are updated and new ones are added.
- B . The customer must buy an Image Streamer upgrade license to get support for the latest operating systems.
- C . The customer needs to download the artifact bundle from the internet that will provide all required components.
- D . The customer can use any Windows build plan because they are self-updating.
C
Explanation:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815217.pdf
HOTSPOT
An integrator has installed a new Synergy frame into a rack with two existing Synergy frames in a customer’s environment.
Click where the integrator should verify that the cabling for the management ring was completed correctly.
Explanation:
Reference: https://support.hpe.com/hpsc/doc/public/display?docId=a00048164en_us
A customer needs to aggregate uplink ports from two Virtual Connect interconnects to increase bandwidth and availability of the networks configured for HPE Synergy platform.
Which steps must the integrator perform in the configuration to meet the customer’s needs?
- A . Connect Satellite modules using Ports L1 and L4
- B . Connect Ports Q7 and Q8 on the Master interconnect Modules (ICM)
- C . Install Redundant Frame Link Modules and a second management ring
- D . Enable Intelligent Resilient Fabric (IRF) on the Virtual Connect Modules
Which operating systems are supported for use with Image Streamer? (Choose two.)
- A . VMware ESXi 6.7
- B . CentOS 7.2
- C . SUSE Linux Enterprise Server 11
- D . Windows Hyper-V 2019
- E . Red Hat Enterprise Linux 7.3
DE
Explanation:
Reference:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_naa00061945en_us&docLocale=en_US
An HPE Synergy compute module has a template-based server profile with two identically configured connections, each containing five VLANs.
What is the most efficient method the integrator can use to add a new VLAN to each connection?
- A . Add the new VLAN to the network set configured in the profile template, and update the server profile from the template
- B . Add the new VLAN under Edit server profile connections
- C . Add the new VLAN to the network set configured in the profile template
- D . Add the new VLAN under Edit server profile connections in the profile template, and update the server profile from the template
HOTSPOT
An integrator needs to validate whether the datastore created for ESXi systems based on 3PAR virtual volume can support all DRS cluster functionalities.
Click on the parameter that the integrator needs to verify.
A customer needs to significantly improve I/O performance to a database server.
Which product should an integrator implement as part of a Synergy composable solution?
- A . HPE Synergy D3940 storage module with SSD drives
- B . HPE Composer with NVMe drives
- C . HPE Synergy compute module with a Tesla accelerator
- D . HPE Synergy Image Streamer
A customer tries to revert a data volume located on the HPE 3PAR array to a specific snapshot that was taken using HPE Composer, but the process fails.
What must an integrator do to fix this problem?
- A . Install the snapshot agent on the operating system to enable online snapshot operations
- B . Select the “Force” checkbox to ignore the warning, and revert to the snapshot because this is a data volume
- C . Navigate to the SSMC and revert to the snapshot using HPE 3PAR tools
- D . Disconnect the volume from the server, then revert to the snapshot and reconnect back to the server
A customer needs to deploy additional management components, such as vCenter Server and HPE Global Dashboard.
According to HPE best practices, how should an integrator deploy these components?
- A . Deploy VMware HA cluster on two dedicated management servers, then deploy management components to this cluster.
- B . Deploy vCenter Server as a virtual machine on the Hyper-V host and HPE Global Dashboard to the domain controller.
- C . Install vCenter Server on the domain controller, then deploy HPE Global Dashboard to the HPE Composer or HPE OneView appliance.
- D . Deploy vCenter Server to any Windows machine, and install HPE Global Dashboard on the same server.
During a first-time installation of HPE Synergy, an external monitor is not available to the integrator.
Which approach should the integrator take to perform the first-time setup?
- A . Download MSTCS, connect the laptop to the front Panel Ethernet port, and open a RDP Session to 192.168.10.1 on port 443.
- B . Download VNC Viewer, connect the laptop to the front Panel Ethernet port, and open a VNC-connection to 192.168.10.1 on port 5900.
- C . Download Telnet, connect the laptop to the front Panel Ethernet port, and open a connection to 192.168.10.1 on port 8443.
- D . Download PuTTY, connect the laptop to the front Panel Ethernet port, and open an SSH connection to 192.168.10.1 on any port (default is 22).
A customer has a datacenter with 3-frame Master/Satellite Synergy solution. They plan to add two additional frames to the remote datacenter, but they want to have a single management tool.
How should the integrator set up the management of the datacenter?
- A . Add two frames from the remote datacenter as remote enclosures using existing Composer
- B . Install one Composer in every frame in both local and remote datacenter
- C . Deploy one Composer in each site and link them together
- D . Connect the management links with fibre cables if the distance between datacenters is more than 500m
An integrator needs to configure a set of networks for Synergy compute nodes to send data to devices outside of a Synergy frame.
How should the integrator complete the task?
- A . Add the network to an interconnect bay within a Logical Enclosure (LE)
- B . Add the networks to an uplink set within a Logical Interconnect Group (LIG)
- C . Add the networks to an Enclosure Group (EG)
- D . Add the network sets to a Logical Interconnect Group (LIG)
A customer needs to expand a single-frame Synergy solution to two frames.
What should the integrator do to establish a proper management network for the two frames?
- A . Connect the RJ-45 management ports of the Virtual Connect modules together with redundant CAT6A cables.
- B . Disconnect the existing management ring, and cable the Frame Link Modules in the first frame to the Frame Link Modules in the added frame.
- C . Connect the RJ-45 front panel connectors on the two frames together with a single CAT6A cable.
- D . In the Synergy console, select the Frame Link Modules in the new frame and define the connection between them.
A customer is planning an HPE Synergy solution with 20 frames and needs to minimize the number of management ports that are required to connect the frames into the existing management network.
Which procedure should the integrator use to address the customer’s concern?
- A . Connect the RJ-45 front ports of each frame to an external switch. Then, connect the uplink from the external switch into the customer’s management network.
- B . Connect FLMs from all frames to two external switches for redundancy. Then, connect the two uplinks from the two switches into the customer’s management network.
- C . Connect the RJ-45 front ports of each frame to two external switches for redundancy. Then, connect the uplink from the two switches into the customer’s management network.
- D . Connect FLMs from all frames into a management ring. Then, connect the management ring to the customer’s management network using two uplinks.