When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Select two.)
- A . It should be filled with blanking panels.
- B . It does not provide correct rack airflow.
- C . It provides easy access for servicing components.
- D . It allows for easier cable management.
- E . It allows for side-to-side component cooling.
A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer’s needs?
- A . ProLiant ML
- B . ProLiant DL
- C . ProLiant BL
- D . ProLiant MicroServer
You are installing a rack at customer site.
How can you ensure redundant power to the rack?
- A . Install two power distribution units (PDUs) with each one connected to a power socket supplied by an independent electrical power source.
- B . Ensure 3-phase power is available in the data center.
- C . Connect an uninterruptible power supply (UPS) to redundant circuit breakers at the facility power source.
- D . Use two different power cords to connect the server to the power grid at the customer site.
A company needs a solution that provides SMB and NFS file shares. The solution must have a built-in data backup to Microsoft Azure.
Which HPE solution meets the customer’s needs?
- A . StoreOnce 3520
- B . StoreEasy 1000
- C . StoreOnce VSA
- D . StoreVirtual VSA
A company plans to purchase new HPE servers. The company needs to maximize local storage capacity within the servers.
Which HPE servers should the company install?
- A . ProLiant BL460c Gen10
- B . ProLiant DL380 Gen10
- C . ProLiant ML110 Gen 9
- D . ProLiant DL360 Gen 9
A customer wants to decrease problem resolution time on their HPE infrastructure.
Why would this customer benefit from Insight Remote Support?
- A . It provides event diagnosis and automatic, secure submission of hardware event notifications to HPE.
- B . It provides health monitoring and alerting and suggests resolutions for common issues.
- C . It monitors 1600 system parameters and applies analytics to predict problems before they can lead to system or component failure.
- D . It maintains an up-to-date change log by recording hardware and system changes in real-time.
You are configuring an internal Smart Array controller on an HPE ProLiant server.
Which statement is true regarding the drives in the logical array?
- A . HDDs and SSDs cannot be mixed in the same logical array.
- B . SATA HDDs and SAS SSDs can be mixed in the same logical array.
- C . SAS HDDs and SATA HDDs can be mixed in the same logical array.
- D . SATA SSDs and SATA HDDs can be mixed in the same logical array.
You have completed a non-disruptive activation of firmware on an SN6000 switch.
Which session must be restarted manually?
- A . Enterprise Fabric Management Suite session
- B . telnet session
- C . SAN connection Manager session
- D . QuickTools session
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?
- A . at the top of the rack with the cables running between the RETMA rails
- B . horizontally on extension bars mounted directly to the frame for improved clearance
- C . in the bottom bay of the rack with the outlets facing the front
- D . vertically, side by side on both sides of the rack with the outlets facing the center
A customer is building out their rack of servers and storage systems. They need a high-performance network with a simple centralized management capability and deep buffer support for iSCSI. They expect high growth in their virtualization environment.
Which solution will best meet the customer’s needs?
- A . Aruba
- B . Altoline
- C . Arista
- D . FlexFabric
A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.
Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?
- A . It will enable two-factor authentication when users log on to iLO.
- B . It will enhance iLO security by leveraging the key stored in the silicon root of trust.
- C . It will allow the servers’ iLO to detect compromised firmware code.
- D . It will enable Zero Sign In to log in to iLO without entering a user name and password.
A customer needs to share files among their Linux-based servers in a cost effective manner. The customer is concerned about compatibility with the servers in their environment that run Windows.
Which HPE StoreEasy feature addresses the customer’s concerns?
- A . RESTful API support across a variety of platforms
- B . symmetric processor architecture for uniformity in transaction processing
- C . use of virtualization technologies to overcome application compatibility issues
- D . multi-protocol access to the same file share over SMB and NFS protocols
DRAG DROP
A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.
In which layer of the OSI model would you find an IP address?
- A . Application
- B . Network
- C . Physical
- D . Data link
A customer has an application that consumes 500 GB storage and requires an RTO and PRO of 15 minutes.
Which backup and recovery technology enables the customer to meet their requirements in the most cost-effective manner?
- A . offsite tape backup
- B . remote storage replication
- C . log shipping
- D . disk-to-disk appliance
A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system.
Which HPE product family will meet the customer’s needs?
- A . Altoline
- B . FlexFabric
- C . Arista
- D . Aruba
A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize the possible downtime?
- A . Insight Online
- B . Smart Storage Administrator
- C . Intelligent Management Center
- D . InfoSight
You are working in a data center with multiple servers and need to update the iLO 5 user names and passwords on a regular basis.
Which tool enables you to streamline and automate this process?
- A . Central Management Console
- B . iLO Amplifier Pack
- C . Agentless Management
- D . RESTful API
You are installing an HPE ProLiant server that has a shared network port for iLO and NIC teaming. You need to ensure that you can still access iLO after configuring the NIC team.
Which teaming technology should you configure?
- A . round robin
- B . switch-assisted load balancing
- C . receive load balancing
- D . network fault tolerance
You are installing an HPE StoreOnce backup system in a customer’s environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer’s requirements?
- A . block device
- B . replication target
- C . NDMP target
- D . VTL device
You plan to perform maintenance on several systems in a rack. You need to ensure that the rack does not tip when you are working on the equipment.
What should you use?
- A . stabilizer kit
- B . lockable casters
- C . adjustable depth frame
- D . leveling feet
You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests on local storage.
Which HPE tool should you use?
- A . iLO
- B . Intelligent Management Center
- C . Smart Storage Administrator
- D . OneView
What should you install with a server for a customer who may need to perform maintenance on the server while it is the rack? (Select two.)
- A . Cable Management Arm (CMA)
- B . redundant PDUs
- C . high performance fan kit
- D . rack stabilization kit
- E . blanking panels