A customer has the following requirements:
– 5TB of local storage to host a 3TB application
– iL05 Service Port to download AHS logs & remote console
– 1x C HPE 400GB SATA 6G Write Intensive SFF (per server)
You propose the following solution:
– 3x C HPE ProLiant DL380 Gen9
– 6x C HPE 1TB SATA 6G Midline 7.2 SFF (per server)
What must be changed in your proposal to meet all of the customer requirements?
- A . HPE iLO Advanced license
- B . HPE ProLiant DL380 Gen10
- C . HPE iLO Advanced Premium Security Edition
- D . HPE Smart Array SR Secure license
A customer needs a tool that will allow them to mount virtual media to multiple HPE ProLiant BL systems at the same time.
What should you recommend to this customer?
- A . Agentless Management Service
- B . HPE OneView
- C . HPE Composer
- D . HPE Onboard Administrator
B
Explanation:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04111367.pdf
During HPE BladeSystem implementation, you need to update firmware of the Virtual Connect modules installed in this enclosure. This enclosure is not managed by HPE OneView.
Which tool can be used to update firmware in VC modules?
- A . Onboard Administration
- B . Insight Display
- C . Virtual Connect Support Utility
- D . Virtual Connect Manager
A customer needs a process by which they can communicate with their equipment using:
– based on an open industry-standard
– provides a programmable interface that uses a lightweight data model
Which methodology should the customer use?
- A . JSON
- B . RESTful API
- C . XML
- D . SOAP
You are troubleshooting an issue with a ProLiant Service and need to revert to the initial configuration. During the process, you forget some of the previous configuration changes made.
Which HPE tool can you use to recall all the configuration changes made?
- A . IML Log
- B . iLO Syslog
- C . Active Health System Viewer
- D . OneView Event Viewer
Which key differentiator is new to the Gen10 ProLiant servers?
- A . UEFI Bios
- B . HPE Flexible Network adapters
- C . HPE Smart Memory
- D . Firmware recoverability
D
Explanation:
Reference: https://tiscom.ru/sites/default/files/additional/dl560_whitepapper.pdf
A customer is evaluating HPE Gen10 ProLiant server options. They want to test the ability to erase all user data so that it is irrecoverable.
Which license option will they need?
- A . iLO Advanced Premium Security Edition
- B . iLO Advanced
- C . OneView Advanced
- D . OneView without iLO
A
Explanation:
Reference: https://www.hpe.com/emea_europe/en/servers/integrated-lights-out-ilo.html
A customer is concerned about managing an HPE Synergy platform.
Which management component is required?
- A . Composer
- B . iLO Amplifier Pack
- C . Image Streamer
- D . Insight Control
A
Explanation:
Reference: https://www.google.com/url? sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0ahUKEwjvs8aH7bLaAhVJKY8KHb0eB QcQFgg0MAE&url=https%3A%2F%2Fh20195.www2.hpe.com%2Fv2%2Fgetpdf.aspx%2F4aa63754enw.pdf&usg=AOvVaw2e8QrO6UkRGxKpbEvAg8aL
You need to enable Insight Remote Support for some HPE ProLiant DL servers.
Which HPE tool can be used for this purpose?
- A . HPE Intelligent Provisioning
- B . HPE Onboard Administration
- C . iLO Amplifier
- D . HPE Smart Update Manager
What is a function of a c7000 Onboard Administrator module?
- A . Deploy an operating system with Intelligent provisioning.
- B . Provides thermal and power status for devices in the enclosure.
- C . Runs a OneView virtual machine.
- D . Perform Secure Erase of blade disk drives in the enclosure.
In HPE Smart Storage Administrator, what does the Wear Gauge parameter describe?
- A . remaining expected lifetime of an SSD drive
- B . maximum number of SSD drives that can be installed in a system
- C . availability level (MTBF) for an SSD drive
- D . performance metrics for SSD drive
A
Explanation:
Reference: https://community.hpe.com/hpeb/attachments/hpeb/itrc-264/148204/3/HP%20Smart% 20Storage%20Administrator%20User%20Guide.pdf
When selecting drives for a high performance application, which advantage do Solid State Drives provide over Hard Disk Drives?
- A . centralized firmware support
- B . extended controller support
- C . parallel read/write
- D . lower latency
D
Explanation:
Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA4-7186ENW.pdf
A customer has ten c7000 enclosures equipped with Gen8 servers and Virtual Connect FlexFabric modules. The servers are monitored by HPE Systems Insight Manager (SIM). The customer plans to add three additional enclosures with FlexFabric modules and GEN10 servers and standardize management using HPE OneView.
How should they implement the new management system?
- A . Deploy HPE OneView, migrate existing enclosures to HPE OneView, and add new enclosures to HPE OneView.
- B . Add new enclosures to the HPE Systems Insight Manager, then migrate all enclosures to HPE OneView.
- C . Upgrade existing HPE System Insight Manager installation to the latest version of the HPE OneView, and add new enclosures.
- D . Configure a new domain group in Virtual Connect Enterprise Manager, import new enclosures to that group, and migrate all of them to the HPE OneView.
A customer has a requirement change where prior to decommissioning a server they must perform a secure erase of the server.
Which iLO license should you include in the new proposal for server hard ware going forward?
- A . HPE iLO Advanced
- B . HPE iLO Standard
- C . HPE iLO Essentials
- D . HPE iLO Advanced Premium Security Edition
Your customer is concerned about the possibility of an attack via hard drive firmware exploits against their server infrastructure.
Which new HPE ProLiant Gen10 technology protests against these attacks?
- A . Secure Recovery
- B . Common Access Card (CAC) two-factor authentication support
- C . Firmware Runtime Validation
- D . Commercial National Security Algorithms compliance
A
Explanation:
Reference: http://www.ingrammicro.be/concrete/files/4115/0970/4854/ProLiant_Gen10_Autumn_2017.pdf (24)
A customer needs the perform rapid checkpoint and restores of the data on their data analytics database.
What questions should you ask to determine whether to deploy HPE Scalable Persistent Memory or HPE NVDIMMs to meet their requirements? (Select two.)
- A . What is your system disk architecture?
- B . What level of fault tolerance is necessary?
- C . Are all the existing servers Gen10?
- D . Who is your current vendor for servers?
- E . Which Operating System will be installed?
AC
Explanation:
Reference: http://www.ingrammicro.be/concrete/files/4115/0970/4854/ProLiant_Gen10_Autumn_2017.pdf
What are benefits of HPE Scalable Persistent Memory? (Select two.)
- A . utilizes DRAM for application performance with flash backup
- B . increases memory bandwidth
- C . increases disk cache memory write performance
- D . reduces database storage bottlenecks
- E . optimizes disk drive performance
AB
Explanation:
Reference: http://www.ingrammicro.be/concrete/files/4115/0970/4854/ProLiant_Gen10_Autumn_2017.pdf (103)
Which technology provides the lowest latency and high bandwidth within high-performance environment?
- A . Ethernet
- B . Fibre Channel
- C . ISCSI
- D . InfiniBand
A customer needs a VSA deployment.
What do you need to verify within the customer environment prior to deployment?
- A . the customer has iLO Advanced licenses installed on all services
- B . the customer has at least one D3940 storage module available
- C . the network adapters installed in the servers support RDMA
- D . the customer has a supported hypervisor
After the iLO has been discovered, an administrator is unable to perform group firmware updates to their DL380 Gen10 server.
What should the administrator check to diagnose the problem? (Select two.)
- A . whether the VLAN information has been configured on the iLO
- B . whether single sign-on is enabled on the iLO
- C . whether the iLO has been added to the DEFAULT users group
- D . whether the Configure iLO Settings privilege has been added to the group
- E . whether the iLO has the Advanced license applied
A customer has a c7000 enclosure running a mix of G7, Gen8, and Gen9 servers. They are decommissioning their G7 servers and plan to replace them with Gen10 servers.
Which Gen10 server is the most appropriate replacement?
- A . SY480 Gen10
- B . BL460 Gen 10
- C . DL380 Gen10
- D . DL360 Gen10
HOTSPOT
Support asks a customer to send them a support log for the server, to be attached to the customer’s case.
From the iLO 5 Overview screen, click on the tab that the customer should use to complete support’s request.
A customer needs to purchase a new Synergy frame now and add two more frames next quarter to expand the first Logical Enclosure.
Which feature allows the customer to add frames without downtime?
- A . HPE Dynamic Bandwidth Optimizer
- B . Frictionless scaling
- C . HPE OneView Advanced License
- D . Intelligent system tuning
An administrator in unable to share the iLO graphic console on a DL380 Gen10 server with another administrator.
What should the administrator check first to diagnose the problem?
- A . whether the shared remote console for this server is enabled on the OA level
- B . whether the iLO has the Advanced license applied
- C . whether the video cable is property connected to the iLO port
- D . whether single sign-on is enabled on the iLO
A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer’s requirements?
- A . HPE ProLiant DL80 Gen10 with LFF SAS drives
- B . HPE ProLiant DL380 Gen10 with LFF SAS drives
- C . HPE ProLiant ML110 with SFF SAS drives
- D . HPE ProLiant DL360 Gen9 with SFF SAS drives
A cost-conscious health care customer is considering Gen10 server solutions to adhere to security mandates.
Which security features should the customer test with an iLO5 standard license? (Select two.)
- A . Runtime Firmware Validation
- B . Manual Secure Recovery
- C . Automatic Secure Recovery
- D . Secure Erase of User Data
- E . Silicon Root of Trust
CE
Explanation:
Reference: https://support.hpe.com/hpsc/doc/public/display?docId=c04952001
A customer has the following requirements:
– server remote control via virtual KVM
– 5TB of local storage to host a 3TB application
– maximize read/write performance for the customer application
You propose the following solution:
– 3x C HPE ProLiant DL380 Gen10
– 6x C HPE 1 TB SATA 6G Midline 7.2K SFF (per server)
– 1x C HPE 400GB SATA 6G Write Intensive SFF (per server)
What is the minimum HPE software license required to meet all of the customer requirements?
- A . HPE Smart Array Advanced Pack
- B . HPE Smart Array SR Secure Encryption
- C . HPE iLO Advanced license
- D . HPE iLO Standard license
- E . HPE iLO Advanced Premium Security Edition
What should you use to validate a supported HBA firmware for connecting to an HPE 3PAR array?
- A . HPE Single Point of Configuration Knowledge (SPOCK)
- B . Smart Update Manager
- C . Operating System Support Matrix website
- D . Unified Extensible Firmware Interface (UEFI)
Which benefit is provided by DDR4 memory?
- A . lower energy consumption
- B . compatibility with DDR3
- C . flash-based buffer cache
- D . built-in high availability
A
Explanation:
Reference: https://www.google.com/url? sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0ahUKEwiZ_t62prXaAhVHYo8KHThyD bMQFggrMAE&url=https%3A%2F%2Fh20195.www2.hpe.com%2FV2%2Fgetpdf.aspx%2F4AA62997ENW.pdf%3F&usg=AOvVaw39Y0kRoJjvdPy9YJX0wL4w
A customer is looking to purchase some new servers for their environment. They need to use a free service tool themselves to calculate the cost of the servers.
Which tool meets the customer’s needs?
- A . HPE Power Advisor
- B . HPE Converged Infrastructure Solution Sizes Suite (CISSS)
- C . HPE iQuote
- D . HPE One Config Advanced
A customer needs to ensure that all data is removed and restore the system to a default state before they transfer their equipment to the new company.
What should the customer do to accomplish this task?
- A . Install HPE iLO Advanced
- B . Use HPE OneView
- C . Use the Erase System Utility
- D . Install HPE iLO Advanced Premium Security Edition
How can you streamline the BIOS setting choices during initial installation of an HPE ProLiant DL380 Gen10 server to meet customer needs?
- A . Use Preconfigured Workload Profiles.
- B . Retrieve predefined settings from iLO.
- C . Use Legacy BIOS settings instead of UEFI.
- D . Use the Custom setting in Legacy BIOS.
Your customer wants to use HPE OneView to update firmware for a new HPE BladeSystem enclosures.
Which HPE OneView license is required?
- A . iLO Advanced
- B . OneView Advanced
- C . iLO Advanced Premium Security Edition
- D . OneView Standard
Which customer need would require an iLO Advanced license with an HPE ProLiant server?
- A . remote power control
- B . remote firmware update
- C . authenticated updates
- D . virtual media
D
Explanation:
Reference: https://www.hpe.com/us/en/product-catalog/detail/pip.332279.html
What HPE ProLiant server family is purpose built for object storage solutions?
- A . BL
- B . DL
- C . Synergy
- D . Apollo
D
Explanation:
Reference: https://www.google.com/url? sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwi19qbksbXaAhULKo8KHRER CwsQFggmMAA&url=https%3A%2F%2Fh20195.www2.hpe.com%2Fv2%2FGetPDF.aspx%2F4AA43200ENN.pdf&usg=AOvVaw0jd4c9jO717TSL4LUmXxPW
HOTSPOT
A customer has received an alert of a component failure.
Where would the customer be able to confirm which event was logged from the iLO 5 overview screen?
DRAG DROP
Match the HPE ProLiant Gen10 servers to the intended workload.
The HPE 800W Flex Slot Platinum Plus Hot Plug Low Halogen Power Supply has a built-in Lithium Ion battery to provide backup power to which component?
- A . Workload Accelerators
- B . Smart Array Flash cache
- C . Load Reduced DIMMS
- D . Persistent Memory
